Fickle USB Connectivity

Not sure where my problem is here, but I'm unable to maintain a consistent USB connection from my TouchPad to any of my home computers - 2 HP systems and a Dell.  The issue is when it tries to detect the USB as a drive.  USB connects, disconnects, connects, disconnects...  Other times it will connect right away and then disconnect a minute or two later for no apparent reason.
The other symptom I'm noticing is that when I try to disconnect the TouchPad by "ejecting" or disconnecting the connect USB device, the TouchPad alwys gives me that "Owww!" error that it didn't properly disconnect even though Windows says it completed the disconnect properly.
Not sure if there's any good troubleshooting practices with USB, or ways to determine if I'm gettin consistent power to/from my USB ports, but I'm open to help.
Thanks,
McBean
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

Not sure why you're getting a flaky connection, but as far as "ejecting" the TouchPad, be sure you use the actual "Eject" command (right-click on the device in Windows Explorer/My Computer and choose "Eject").
We've seen many folks here using the "Safely Remove Hardware" dialogue in Windows, instead of Eject.  The former does not work correctly, and can cause some problems with the TouchPad.
Are you using the HP-supplied USB cable?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • AiO Remote Ink Levels etc not accessible with USB connection

    My printer prints and scans just fine...except that it ran out of ink after about 15 pages. I'm trying to view the ink levels, but everything in the HP AiO Remote says it's not supported with the USB connection. There's no other way to connect my printer. I need to view the ink levels and be able to put in new ink, but I can't because the software isn't working right. Help?

    Hi @HnnhSmth95, 
    I see by your post that you are unable to view the ink levels by a USB connection. I can help you with this, but I will need some more information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

    I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one.  Now, however, with my Ipad version 2 I can no longer get this to work.  Can anyone help?  Thanks.

    Hi,
    HP do not provide any USB connection solution for iOS.
    As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
    http://www.activeprint.net/support/
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • Computer not responding to iphone usb connection

    I get no response from plugging in my iphone 3g. I've tried restarting the computer and the phone many times, still nothing? All software up to date, computer, iphone and itunes.

    Double check your USB connection. That's been the problem in most cases for me.

  • Nokia c5-03 usb connecting error

    hi i have nokia c5-03.there is no memory card present in my phone.but when i connect my phone to pc through cable the erroe comes in there (memory card not present usb connection may not work as expected) anyone know what's the reason is this... plz help!

    Answered your question in the other forum mate.

  • Cannot delete photos from camera folder in PC by USB connection

    After few times update of iOS, I cannot delete the photos in iPhone 5 from my laptop. I can do it before but not now.
    I usually connection my iPhone 5 through USB cable to my laptop.
    Just go to My Computer and open iPhone photo album, then select, copy, cut or delete. This is my way to manage my photos.
    I have not using iTunes for long time since the iCloud launch.
    Please help me on this issue.
    Many thanks.

    Not only was this design change an extremely bad idea, after updating my phone, it moved all the pics from my camera roll into a photos album that cannot be edited.  I can no longer delete any of these pics from my phone or from the USB connection, except from the camera roll which was added back. Now what??
    How am I supposed to get rid of all the pics I don't want? This idiotic change created a big mess for me that there appears to be no way out of...
    GIVE US BACK CONTROL OF OUT PHONES, AND STOP SCREWING WITH OUR ABILITY TO DELETE PICS!!!
    I AM EXTREMELY UNHAPPY WITH APPLE NOW!

  • IPhone Issues with USB Connection and Bluetooth in GM cars

    I recently purchased a 2009 Chevy Cobalt SS/TC and it has a USB connection for an iPod. Prior to the 2.1 updated the USB connection worked flawless as well did my handsfree/bluetooth. I had the Apple Genius Bar check my iPhone for any issues due to a corrupt update but everything turned up fine. When i connect to my car I receive an error message (iPod Did Not Authenticate. Check iPod Version). Also my bluetooth will sync but when you answer the phone using hands free you get no audio from the iPhone or speakers in the car. I used a friends iPod and everything worked fine but when I connect with a new iPod it displays the same error. I have contacted GM but they said talk to Apple.
    If anyone can help please let me know.
    Thanks

    Hey J,
    Well you got me thinking about your question, and I guess I didn't get it the first time. Again, I own the same car - 09 Chevy Cobalt SS/TC, Black. A lot of fun! I plugged my iPhone into the radio USB connection and get the same error. The GM radio does not support the iPhone. It will not authenticate. The GM radios' firmware is looking for an iPod, not an iPhone. That is expected. As far as the iPhone and it's Bluetooth, again the iPhone's Bluetooth hands free works fine, except I cannot answer the iPhone during an incoming call without first unlocking the iPhone then pressing the mute button on the steering wheel. For what it's worth the iPhone will charge through the USB connection. I'm a little confused on what you are trying to connect. Bottom line, an iPod should always work, an iPhone, not at all. Lastly, I have purchased the GM Personal Audio Link (PAL) and hope to use it with my iPod so I can put the iPod in the glove compartment. Although I have heard a lot of negative comments and issues with it for being slow and sluggish. If so, I'll be sending it back and I'll stay with the USB connection. I'll let you know how that works.

  • Is it possible to use my ipad 4 as a second monitor through a USB connection.

    Is it possible to use my ipad 4 as a second monitor through a USB connection.

    perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
    imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked.

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • Acura USB Connection Problems After iOS 8.2 Update

    I have a 2014 Acura MDX and prior to the iOS 8.2 update, I could play music either via Bluetooth or the USB connection through the iPod "source" (though the USV connection had far superior sound).  After the update, the USB connection doesn't work anymore. Same cables used and the iPhone picks up a charge so it is not a bad connection. Anyone else having the same issue?

    this happens also to me. Opel Astra / GM version in Europe.
    8.2 totally killed audio via USB cable. Connecting results in "no supported audio files found"

  • After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

    After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

    Hello, chocotac0.  
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    Cheers,
    Jason H.

  • I have an Pioneer HD TV, but it does not have the HDMI port and it only has a USB connection?  Can I still hook up my Apple TV to my TV?

    I just got an Apple TV (the newest black one) and I have an older Pioneer HD TV.  I noticed that I don't have a HDMI port on the TV and only a USB connection.  My question is, can I still hook up the AppleTV to my TV with other connection wires and will it still allow me to use my ITunes music, photos and Netflix with the same picture and sound quality?
    Thank you!

    Welcome to the Apple Community.
    The Apple TV will not work over USB, the only type of connection supported is HDMI.

  • Can I use my iPhone or iPad as a web cam for my PC via the USB connection?

    I've seen quite a few Apps for doing this wireless, most of which a very poorly executed OR don't work at all. I'm just wondering why it hasn't been more popular to do this via the USB connectivity.

    Thanks Lawrence but the point is, I already own the $600 dollar device (given as a gift) and secondly because to purchase a web cam that has the same quality as the iPhone is actually just a bit more than $10 and I'm not really desirous to spend anymore money based on my budget.  Any ideas of whether or not it can actually be done via USB OR do you have experience with an actual App that works via wireless to a PC?  Thanks again...

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

Maybe you are looking for

  • I need detailed explanation of the OC4J config/*.xml files.

    Anybody know where I can find good descriptions of the OC4J config files?? I've found some stuff on www.orionserver.com but they aren't good enough. Specifically, I have someone who wants a <lib> entry made for his app into the server.xml file. I wan

  • Hiding Images in Java

    Hi all, I have to implement the Steganography using Java, i have to get two images and have to hide one image in another , please give me some ideas or sample links where i can explore to implement it... Thanks & Regards, Justin

  • Zooming in and then zooming out in AS2 (Without scaling the image)

    Basically I want to know if there is a way to go from a zoomed in version of something, and then seeing the whole image in another frame. (By pressing a button) Let's say there's a tree, I would bascially like (upon pressing a button which I can do)

  • How do I stop Aperture from dislpaying MobileMe popup?

    Maybe this has to do with my copy being a free trial... Everytime I launch Aperture, a window pops up and askes me if I want to sign in to MobileMe. The options are "SignIn", "No Thanks", and "Learn More". I don't see a checkbox that says "Don't show

  • Oracle mapviewer

    Hi I am using mapviewer 9.0.4. I download mapviewer examples and it works well. But when i create a map and use this example of XML requests to display my map, it did not work. I convert a shapefile to oracle spatial format by shp2sdo.exe. Then i def