FICO - With regard to IS OIL

Dear All,
Require your help on the a query, I want to know is there any material on FICO part with regard to IS OIL implemenations.
Request you all to guide and provide some documents,
regards
anand

Dear Ashok,
Yes, you are right
1 About 80% of the business for IS Oil are used by HPM and TDP modules. so you can go for any one
of these module which talks about Excise duty processing, claims, calculations and posting liabilities
2.More specific to IS Oil then PRA is better option, but limited projects, as the business is in Large pack crude oil industries across the world.
3.you can find the same in help.sap.com. Best Practices--> Technical informations
Bulding block Library.
Some other links.
http://www.sap.com/industries/oil-gas/large/businessprocesses/index.epx
http://www.sap.com/industries/oil-gas/pdf/0119mySAPOilGas-Upstream-v3.pdf
4. sure.
Best Regards
Satish

Similar Messages

Functional specfication with regard to FICO.

hi,
let me know,
what is functional specfication with regard to FICO.
what is the procedure involved in raising a functional specfication.
which phase in the project we raise the functional specfication.
Regards
Soumya

what is functional specfication with regard to FICO. : FS is mainly issued by a functional consultant to ABAPer for any customised development(process) or report.
what is the procedure involved in raising a functional specfication.: Normally for the business team a BR(business requirement document is raised) based on feasibility check solution engagement team will raise a CR(change request),so with ref.to CR , related functional consultant will prepare the FS.
FS is outline of the process or the data flow right from selection parameters to the output of the development or report.
which phase in the project we raise the functional specfication.:
For any customisation involved i.e., at the time of final preperation.FS is in short related with ABAP/BI developments or report.
or after Go live also in between they might get specific requirements which might not covered earlier or introduced any new process or derivation of any reports which are not their in the SAP standard IMG activities or reports.
Hope this is clear.

Integration between SAP HR and FICO module regarding advance payments

Hi friends,
Can anybody tell me that is there any type of integration possible in SAP HR and FICO module regarding advance payments?
I mean to say that, if any advance payment made in cash department through FICO module on behalf of any employee vender and the amount is recover from that employee salary ( in full or installment ) through HR module in time of salary process. Is it possible that the recovery will reflect in FICO module also.
Eg. : Suppose one employee has taken an advance of Rs. 10000 from Accounts & the amount is recovered from his salary by Hr as Rs. 5000 per month. After first month salary is it show as Rs. 5000 to be recovered from him in the FICO module.
Please let me inform that is it possible in SAP. If yes then how?
I shall wait for your warm response.
With regards,
Diptendu

Hi Sikindar,
Thanks for your reply, it's really helpful for me. But can you please tell me that, is there any way to automatized it.
I want to mean that, what ever fitment is made by the accounts in FICO it will reflect in payslip and related reports of HR module.
Eg. :-
If anyone take any advance from accounts, after make an entry in FICO, it will directly reflect in his payslip as a note and also display in the salary related report of HR.
In time of recovery, it will automatically deduct the amount from his salary and reflect in his payslip ( in the deduction part ) and reports as per mansion installment ( The no. and amount of installment should be maintain in FICO. )
With regards,
Diptendu

EXCEPTION_ACCESS_VIOLATION issue with regard to OpenGL

EXCEPTION_ACCESS_VIOLATION issue with OpenGL occurring with the Java SE Runtime Environment 6u17 on Windows 7, 32 & 64 bit platforms.   Version 6u24 and later does not produce the crash. However, we cannot use any other version of JRE other than 6u17 due to customer constraints. The two primary scenarios where crash (jvm exits) occurs are: 1) toggling between two applications then selecting an image item on screen ( OpenGL rendering takes place)... (Log file: hs_err_pid6568_C2_TC_error.log). Scenario 2: When panning an image (OpenGL rendering takes place) and then clicking a button to load additional image data (OpenGL rendering takes place), crash occurs (Log file: hs_err_pid6036_ENR_TERRAIN_crash.log)
Is there any Oracle documentation noting any JRE fixes between 6u17 and 6u24 that might at least mitigate the issue(s) described above? Or information with regard to issues between JRE's and OpenGL ? Also, if anyone can advise on code mods, etc that we can try toward said mitigation efforts of course would be helpful.
The following snippet hopefully should suffice as general example for both noted issues:
Log snippet ( hs_err_pid6568_C2_TC_error.log):
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6ec158d6, pid=6568, tid=7176
# JRE version: 6.0_17-b04
# Java VM: Java HotSpot(TM) Client VM (14.3-b01 mixed mode windows-x86 )
# Problematic frame:
# C [GLU32.dll+0x58d6]
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x4d996000): JavaThread "pool-6-thread-1" [_thread_in_native, id=7176, stack(0x502b0000,0x50300000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000028
Registers:
EAX=0x00179ca0, EBX=0x00179ce8, ECX=0x00179ca0, EDX=0x5691e9a0
ESP=0x502ff4ac, EBP=0x502ff4cc, ESI=0x00000000, EDI=0x00179ca0
EIP=0x6ec158d6, EFLAGS=0x00010246
Top of Stack: (sp=0x502ff4ac)
0x502ff4ac:   6ec13548 001833f8 0018e060 0018e018
0x502ff4bc:   00179ca0 00000000 00000018 502ff4f0
0x502ff4cc:   502ff4f0 6ec165a8 001a5038 0018e048
0x502ff4dc:   0018e018 001cd728 6ec147d7 001cd728
0x502ff4ec:   001a5038 502ff514 6ec14925 2e5096af
0x502ff4fc:   5f338d35 5038bf30 001a5038 001a5038
0x502ff50c:   02e177c2 0016b930 502ff534 6ec12c65
0x502ff51c:   001a5038 5038bf30 0000001d 001a5038
Instructions: (pc=0x6ec158d6)
0x6ec158c6:   30 dc 61 30 eb e7 dd db dd d9 dd d8 c3 dd 41 28
0x6ec158d6:   dc 66 28 dd 42 28 dc 61 28 d9 c0 d8 c2 d9 ee d8
Stack: [0x502b0000,0x50300000], sp=0x502ff4ac, free space=317k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [GLU32.dll+0x58d6]
C [GLU32.dll+0x65a8]
C [GLU32.dll+0x4925]
C [GLU32.dll+0x2c65]
C [pep_gx.dll+0x3dc8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative.nativeGetRenderedChart(Lcom/cimmeria/efb/crom/common/utility/ILogUtility;Lcom/cimmeria/efb/crom/common/jni/JNIErrorInfo;Lcom/cimmeria/efb/crom/tc/cmn/jni/IChartImageProxy;IFZI)V+0
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody2(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+51
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody3$advice(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;Lcom/cimmeria/efb/crom/tc/cmn/aop/RuntimeExceptionAndErrorMonitorAspect;Lorg/aspectj/runtime/internal/AroundClosure;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+14
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call()Ljava/lang/Object;+34
j java.util.concurrent.FutureTask$Sync.innerRun()V+30
j java.util.concurrent.FutureTask.run()V+4
J java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Ljava/lang/Runnable;)V
j java.util.concurrent.ThreadPoolExecutor$Worker.run()V+28
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub

There are some other solutions possible.
1. Get another driver. The only one known is java only so it wont crash. But is not not free.
2. Use a proxy driver. That means that another app actually does the database work. If it crashes you just start it again (which you can do in your main code.) That way it won't take down your server. There are commercial jdbc drivers that claim MS Access but are are really just proxy implementations as an option in this area.

License key question with regards to upgrading from 7/8.1 to 10

Hi, I hope I've posted my question in the right area of the forum:
I understand that Windows 10 will be a free upgrade for Win7/Win8 users.
That's really wonderful but I was wondering what the exact mechanism with regards to our 7/8 license keys. Here's a couple examples to clarify my question:
first, example: I have Windows 7 Pro license and say I upgrade to 10 within the first year. Let's say I need to reinstall Windows after that first year is finished will I still be able to use that same license key I used to upgrade 7 to 10 to install a fresh
copy of Windows 10 or will I need to purchase a new license because the year is elapsed?
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7... because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road:
where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
Thanks for the feedback!

Hi Momashi
Here's another scenario. I upgrade to Windows 10 from 7 and after trying Windows 10 for while, I decide to uninstall 10 and go back to 7...
because I'm crazy like that.... Will I be able to use my original Key for Windows 7 or is the upgrade a one way road: where the 7 key turns into a Windows 10 key and can no longer be used to activate Windows 7?
If you Upgrade to Windows 10 and do not like it, for whatever reason.
Before you upgrade to Windows 10.
Create an image of windows 7 to an external HD and a recovery CD, using windows 7 Backup and Restore.
You can re-install windows 7 in the SAME SYSTEM using the recovery CD without using a key.
Hope it helps
Where did you get your outlandish information about a Windows 7 key turning into a Windows 10 key? Nothing in the past has ever happened like this before, so what makes you think it will happen with Windows 10?
My Windows ME did not turn into a Windows XP key!
My Windows XP key did not turn into a Windows Vista key!
My Windows Vista key did not turn into a Windows 7 key!
And so on!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error With regard to occurred in the ABAP program "J_1IRUTZ" - J2iu

Dear All,
This is with regard to ECC 6.0, when running this transcation J2IU , i am getting this following Error.
"J_1IRUTZ" - in "FILL_PAYABLE_AMOUNT"
The main program was "J_1IRUTZ ".
If any one has come across this Issue please do let me know.
regards,
sgs.

HI
I am also facing the same issue with J2iu tcode. Can you please suggest if we need to use monthly utilization code - J2IUN and also please elaborate your answer regarding code change for rem balance.
It will be really appreciable if you can explain how it got resolved.
Regards
Mukta

Hierarchy variant Z01 is incomplete with regard to fiscal year 2009 in FMSG

Hi,
I get the error messages in T-code :FMSG
Error messages : Hierarchy variant Z01 is incomplete with regard to fiscal year 2009
I only have the commitment item and do not have the fund center.
Kindly assist how to resolve it.
Thanks.
JJ

Hi Joo,
i have same problem with you.
if you already solved the problem, please share the solution
thanks before

With regard to lock object and authority check

hi all
i would like to know about lock object and authority check specifically in reports. there is a coding in sap library with regard to authority check, but there is no coding to restrict user (i mean there is no user names that the object is restricting for a particular user or any user has got permission to change or display object).
further, the code mentions that you need an authorization in your user master record for the object, could any of u explain where is user master record.
below is the code for authority check.
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
    WHEN 'SHOW'.
   AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD '*'
ID 'ACTVT' FIELD '03'.
   IF SY-SUBRC NE 0. MESSAGE E009. ENDIF.
   MODE = CON_SHOW.
   SELECT SINGLE * FROM SPFLI
    WHERE CARRID      = SPFLI-CARRID
    AND    CONNID      = SPFLI-CONNID.
   IF SY-SUBRC NE 0.
MESSAGE E005 WITH SPFLI-CARRID SPFLI-CONNID.
   ENDIF.
   CLEAR OK_CODE.
   SET SCREEN 200.
    WHEN 'CHNG'.
   AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD '*'
ID 'ACTVT' FIELD '02'.
   IF SY-SUBRC NE 0. MESSAGE E010. ENDIF.
   MODE = CON_CHANGE.
   SELECT SINGLE * FROM SPFLI
    WHERE CARRID      = SPFLI-CARRID
    AND    CONNID      = SPFLI-CONNID.
   IF SY-SUBRC NE 0.
     MESSAGE E005 WITH SPFLI-CARRID SPFLI-CONNID.
   ENDIF.
   OLD_SPFLI = SPFLI.
   CLEAR OK_CODE.
   SET SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
i thank u all for the help in advance.

hi
this might help
REPORT YUSRLOCK NO STANDARD PAGE HEADING.
TABLES: TRDIR, USR02.
DATA: MARK,CNTR TYPE I,
      ACCNT LIKE USR02-ACCNT, ERDAT LIKE USR02-ERDAT,
      ANAME LIKE USR02-ANAME, CLI(3) VALUE 'AAA', SZIN TYPE I,
      SYDATUM LIKE SY-DATUM, FLAG(3).
TABLES: UINFO.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 10.
        INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
START-OF-SELECTION.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
    ID 'TAB' FIELD USR_TABL-SYS.
SELECT * FROM USR02 CLIENT SPECIFIED ORDER BY MANDT BNAME.
    IF USR02-MANDT <> CLI.
      SZIN = SZIN + 1. SZIN = SZIN MOD 2.
      CLI = USR02-MANDT.
    ENDIF.
    IF USR02-UFLAG = 0.
      MARK = ' '.
    ELSE.
      MARK = 'X'.
    ENDIF.
    CLEAR FLAG.
    LOOP AT USR_TABL.
      IF USR_TABL-BNAME = USR02-BNAME AND USR_TABL-MANDT = USR02-MANDT.
        FLAG = '!!!'.
      ENDIF.
    ENDLOOP.
    SYDATUM = SY-DATUM - 30.
    IF SYDATUM < USR02-TRDAT.
      IF SZIN = 0.
        WRITE:/ ' ', MARK AS CHECKBOX,' ', USR02-BNAME COLOR 2,
              ' ',USR02-MANDT COLOR 2,
              '   ',USR02-USTYP COLOR 2,
              ' ',USR02-TRDAT COLOR 2, USR02-LTIME COLOR 2,
              ' ',FLAG COLOR 6.
      ELSE.
        WRITE:/ ' ', MARK AS CHECKBOX,' ', USR02-BNAME COLOR 3,
              ' ',USR02-MANDT COLOR 2,
              '   ',USR02-USTYP COLOR 2,
              ' ',USR02-TRDAT COLOR 2, USR02-LTIME COLOR 2,
              ' ',FLAG COLOR 6.
      ENDIF.
    ELSE.
      IF SZIN = 0.
        WRITE:/ ' ', MARK AS CHECKBOX,' ', USR02-BNAME COLOR 2,
              ' ',USR02-MANDT COLOR 2,
              '   ',USR02-USTYP COLOR 2,
              ' ',USR02-TRDAT COLOR 4, USR02-LTIME COLOR 4,
              ' ',FLAG COLOR 6.
      ELSE.
        WRITE:/ ' ', MARK AS CHECKBOX,' ', USR02-BNAME COLOR 3,
              ' ',USR02-MANDT COLOR 2,
              '   ',USR02-USTYP COLOR 2,
              ' ',USR02-TRDAT COLOR 4, USR02-LTIME COLOR 4,
              ' ',FLAG COLOR 6.
      ENDIF.
    ENDIF.
    HIDE: USR02-BNAME, USR02-MANDT.
ENDSELECT.
CLEAR USR02.
TOP-OF-PAGE.
WRITE:/ 'LOCK   USER         CLIENT TYPE     LAST lOGIN     ' COLOR 6.
SKIP.
AT USER-COMMAND.
IF SY-UCOMM = 'SEL'.
    DO.
      CLEAR MARK.
      READ LINE SY-INDEX FIELD VALUE MARK.
      IF SY-SUBRC NE 0. EXIT. ENDIF.
      IF USR02-BNAME IS INITIAL.CONTINUE.ENDIF.
      SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE
      MANDT = USR02-MANDT AND BNAME = USR02-BNAME.
      IF MARK = 'X' AND USR02-UFLAG = 0.
        USR02-UFLAG = 64.
        UPDATE USR02 CLIENT SPECIFIED SET: UFLAG = 64 WHERE
        MANDT = USR02-MANDT AND
        BNAME = USR02-BNAME.
        COMMIT WORK.
      ENDIF.
      IF MARK = ' ' AND USR02-UFLAG = 64.
        USR02-UFLAG = 0.
        UPDATE USR02 CLIENT SPECIFIED SET: UFLAG = 0 WHERE
        MANDT = USR02-MANDT AND
        BNAME = USR02-BNAME.
        COMMIT WORK.
      ENDIF.
    ENDDO.
    CLEAR USR02.
ENDIF.
regards
Arun

Query with regards to installation of Infinity fol...

Following my home move my infinity installation differed from my previous address and I was generally disappointed with the engineer. The RJ11 (think thats the name of the cable) that runs from my openreach modem to the master socket is connected to the side of the master socket faceplate rather than the simply putting the cable into the front. This differed to my previous address where I simply plugged the RJ11 cable into the master socket.
Now the other end of the RJ11 runs into my bedroom upstairs as this is where I wanted my homehub to be. However I have a few gripes with what the engiineer did. Firstly he left me around 5 metres short and secondly didn't even bother to drill through any walls. So the cable is between the crack of the door which of course means I couldn't shut my bedroom door. Just to explain, the RJ11 cable from my master socket runs into a white small box which allows another RJ11 to be connected on the other end.
The other day I lost connection and knew the cause was this extended RJ11 cable as my connection was fine if I plugged the RJ11, Modem, Hub directly into the RJ11 port on the front of my master socket. The cause was the tiny blue cable had snapped off the small white box that extends into my bedroom. Thankfully it was easy to fix myself. However when I did so my speed went from 45mbps to 67mbps! This to me suggests the cable was incorrectly connected.
My last question is why if I connect the RJ11, Modem, Hub directly into the front of my master socket is the speed around 20-30mbps slower than if I use the RJ11 that is connected to the side of the master socket?
Sorry I have one more question. Im still using the Home Hub 4 and was expecting BT to send me a Home Hub 5. I thought following a home move my contract was renewed which mean't I automatically qualified for a new home hub?
If anyone is confused by my installation I can upload some pics.

Hi DJM,
It does sound like a bit of a strange set up. I can take a look at this for you. Please send me in your details using the "Contact The Mods" link found in my profile.
With regards to the Hub 4 a home move order would renew your current package for the further 12 months and would not include the Hub 5.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I have been informed by Orange (UK) that Apple have 'changed their rules' with regards to unlocking iPhones, and that it will take 6 months to process. Is this correct?

I have been informed by Orange (UK) that Apple have 'changed their rules' with regards to unlocking iPhones, and that it will take 6 months to process. Is this correct?

Fezzzer wrote:
I have been informed by Orange (UK) that Apple have 'changed their rules' with regards to unlocking iPhones, and that it will take 6 months to process. Is this correct?
Complete rubbish
Apple do not lock iPhones
Carriers do because they have subsidised the purchase price
and therefore only the carrier can unlock an iPhone
Orange have decided to apply 6 months to protect their revenue
they never have been the fastest to unlock

[svn:osmf:] 15769: Fix FM-505 - Document behavior of F4MElement ( and LoadFromDocumentElement) with regard to trait events.

Revision: 15769
Revision: 15769
Author:   [email protected]
Date:     2010-04-27 13:59:03 -0700 (Tue, 27 Apr 2010)
Log Message:
Fix FM-505 - Document behavior of F4MElement (and LoadFromDocumentElement) with regard to trait events.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-505
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/F4MElement.as
    osmf/trunk/framework/OSMF/org/osmf/elements/LoadFromDocumentElement.as

What is HEAD COUNT with regards to HR Data

Hi Experts
Can you please define HEAD COUNT with regards to the HR Data.
Is it a Count of Employees
Please update me thanks

HI
In HR, the head count term refers to no of employees only...there are some standard reports available for analysing the head count for an org.
Hope it helps
Darshan

ASM with regard to High Availability

Hi at all!
I try to figure out what effects the use of ASM for my system has, particularly with regard to High Availability. I have a database on a RAID-5 Server, does it make sense to implement ASM for this system? I know, ASM has other effects, regarding the i/o and rebalancing but would it be less fault-prone too? Why? Do you have any Whitepaper-suggestion for me? The FAQ-Link from the 'Welcome to the Automatic Storage Management (ASM) Forum!'-Topic is broken, there is no document 370915.1 in metalink ...
greetings

Hello,
Not sure if you are using a clustered enviroment, but even when using single instance ASM it is usefull to use. You can on the fly add disks, you don't need to worry about anymore about where you put your datafiles for spreading as this is done.
You can use to let your storage system arange the failover like RAID5, but you can also use ASM failure groups for this feature. In case one failure group has an issue it will continue to work and use the correct failure group.
I believe managing your environment will be much easier.
check out :
http://www.oracle.com/technology/products/database/asm/index.html
Good luck,
B de CockBuning
www.rachelp.nl

Business place with regard to Vat Accounting ( FI -SD & FI- MM )

Dear Freinds,
Kindly advise me about Business place with regard to Vat Accounting ( FI -SD & FI- MM ) . I have set up co code, tax procedure, created gl accounts etc in ECC 6.0.
I intend that the VAT reporting for my co code should be automatic, whenever the SD /MM person do billing / Invoice verification etc , <u><b>accting entries will be posted automatically, Vat accounts would get updated instantly, Monthly Vat returns are prepared automatically & returns are filled at the place of business for eg, nasik, delhi, ,Pune , Chandigarh etc etc.</b></u>
Thnks
Vinod

Hi
Here is a link from SAP help
http://help.sap.com/saphelp_47x200/helpdata/en/e5/077d4f4acd11d182b90000e829fbfe/frameset.htm
Thanks
Ashok

How to deal with token Windows machines with regard to file sharing

We have an office of about 12 Macs, but we have couple of token Windows machines too.
Each Mac user has their own username and password for logging into there machine/server, administered by a Standard setup of Mac OS X Server (Server Preferences).
The question is what should I do with the Windows machines on the network with regard to file sharing and authentication? They don't need individual accounts; they could just have general accounts, but I don't know how to set them up with regard to the server.
Do I simply need to make sure that the username user to log into the Windows machine is a user on in Server Preferences?

{quote}
Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission. The network name cannot be found.
Except that I've got the other machine connected with no problems.
Message was edited by: Christiaan

FICO - With regard to IS OIL

Similar Messages

Maybe you are looking for