Fidelity active trader give me an error message your browser is not supported. Can you fix.

I use active trader pro and have an error message that browser is not supported in when I do research and some other areas.
How can I fix this is there an up grade?

hello kmore, you'd have to contact fidelity's support about that issue...

Similar Messages

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • An error message 'your browser doesn't support iFrames' appears when I play a game on Facebook & doesn't load.

    I don't have that problem on any other game, just on Frontierville, Facebook. If I refresh the page over & over for a long time it eventually loads. I've had this problem for two weeks.

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • I am not able to activate my iPhone 3GS after upgrading it to IOS 5.1.1 since it shows the error message "your iPhone could not be activated because the activation server is temporarily unavailable. I am asked to retry after some time. How can I avoid thi

    i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.

    You had a jailbreak and unlock.
    When you updated you cooked it.
    Your phone is done.
    Time for a new one.

  • Upload Error message: HTTPS protocol is not supported

    Hi,
       Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
       Log says
    Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
         How to resolve this?
    Thanks
    Sumathi

    Hi Sumathi,
    As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
    Hope it helps
    Detlev

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • I purchased Elements 13.  When I tried to install I get the error message that it is not supported by Vista.  Now what do I do?

    I purchased Elements 13.  When I tried to install it I get the error message that it is not supported by Vista.  What do I do now?

    If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
    There are many inexpensive refurbished or "off lease" computers available at very reasonable cost.  Here is one example (scroll down):
    Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com

  • HT4623 When I plug my ipad to itunes i get the error message that it is not supported and I have to go to itunes and get itunes re-installed?  i never had this problem before.  if i do this will i loose all my files, music, etc?

    When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install.  if i do this will i loose my files and music?

    No, you should not lose anything.

  • Error message: this computer is not supported by the system recovery media.

    I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"

    Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
    Enter BIOS by tapping F10 key. Is all system info intact/complete?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

    I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing."  I am in the US how do I switch?

    When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located.
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • HT201209 If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for

  • HT1386 my ipod touch is not showing up in itunes

    Why does this happen?  I just bought this ipod touch in January and now it doesnt show up in itunes when I connect it to my computer.  Is there an easy fix for this???

  • RAID on LVM logical volumes

    Hey, i've got a 1T and a 500G hard drive in my workstation. The 500G drive is my media disk. I initialized a software RAID-1 with one missing drive on a 500G logical volume on the 1T disk. After formatting and copying all the data from the media disk

  • SA: BerkeleyDB not available...

    Hello everybody, is there an explanation, why amavis is giving me this error on a standard mail installation of OS X Server 10.4.3 -> 10.4.4? (You only see the error if you chance the protocol level to debug.) "BerkeleyDB not available, using memory-

  • Unable to import iPhone photos to iPhoto

    Hi everyone. Im on iPhoto 7.1.5, when I plug my iPhone into the computer and then open iPhoto, there is no option to import photos, I have in the past imported photos from the iPhone into iPhoto, but now for some reason it wont give me an option to i

  • BI Publisher 11g - calling SQL Server 2005 stored procedure error

    Hi experts I have been calling succesfully an SQL server 2005 stored procedure for the data model of a BI publisher report in 10g, passing it a customerNo parameter. EXEC     [dbo].[usp_WelcomeLettersConsumerNo]           @CustomerNo = :sCustomerNo H