Fidelity ATP via Macbook pro

I am unable to load Fidelity Active Trader Pro onto my MacBook Pro running Parrells and Windows. Any solutions here would be greatly appreciated.

ActiveTrader is available via website on the Mac:
https://www.fidelity.com/trading/advanced-trading-tools/active-trader-pro/system -requirements
Operating system
Active Trader Pro®: Windows 7
ActiveTraderPro.com®: Windows 7, MAC OS X 10.7 or higher, with Intel Processor
Active Trader Pro®: Windows Vista, Windows 7, or Windows 8
ActiveTraderPro.com® : Windows Vista, or Windows 7, MAC OS X 10.6 or higher, with Intel Processor
Processor
Active Trader Pro: Intel Core i5/i7 or equivalent dual or quad core 3.0 GHz
ActiveTraderPro.com:Intel Core i5/i7 or equivalent dual or quad core 3.0 GHz
Active Trader Pro: Dual Core Processor 2.53 GHz or faster
ActiveTraderPro.com: Dual Core Processor 2.53 GHz or faster
Memory
6GB or more
2GB
Network connection
High-speed Internet 6 Mbps or better
High-speed Internet 3 Mbps or better
Hard drive
200 MB available
200 MB available
Graphics cards
32 bit graphics support
512 MB or more video memory
Note: Dedicated graphics card preferred
32 bit graphics support
128 MB video memory
Whenever you see 10.7 or higher it generally means compatible up through at least 10.7.1, and most likely at least through 10.7.5. Though Apple let Oracle take over Java in 10.7.3 and later, which may cause a scuffle.
10.8 and above may be compatible, but I wouldn't count on it.
10.8 and 10.9 are practically the same hardware, as they require the same hardware from Apple.
Note how it says 512 MB of dedicated memory. That means MacBook Air, and MacMini may run into problems.
If there are issues getting the graphics card in dedicated mode in Parallels that could be your problem. Contact Parallels tech support on that.

Similar Messages

How to customize "via Macbook Pro" on Facebook?

Hi Everyone, Whenever I post/replying anything on facebook from my MacBook pro it doesn't show anything like "via Macbook Pro". How can I customize this in such a way that the apple logo also appears on each post on facebook. Please advice!

You could manually type it yourself but that would make you look a little stuck up because people will know your just advertising that you own one.

Can't connect to internet via MacBook Pro to Airport Extreme

I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

Ipad wifi access via Macbook Pro?

I do not have a wireless router at the moment to access wifi for my iPad,however I remember using wifi via settings in my Macbook pro.I was able to use the iPad internet through this.Someone helped me with this but it's been a while & I don't remember.Can someone show me the steps to this please.
Thanks.

You need to use Internet Sharing in the System Preferences of the Mac. It is a little bit different depending on which OS X version you are running. I still use it with an iMac running 10.4.11. In fact, I am using it now.
This should get you pretty close.
OS X Mavericks: Share your Internet connection
OS X Mountain Lion: Share your Internet connection
OS X Yosemite: Share your Internet connection

HDMI or RGB: Which is better via MacBook Pro?

Hello. I want to connect my MacBook Pro (with a Mini-Display Port) to my HD flat-screen monitor in my living room. The HD flat-screen monitor does both RGB and HDMI connections. I can do a Mini-Display Port to RGB adapter to connect them. -Or I can connect an HDMI to DVI cable and to a Mini-Display to DVI adapter to make it work. BUT which way is better and will give me better resolution?
Thanks.

Ahh!!! Correction: I meant VGA. So...
I want to connect my MacBook Pro (with a Mini-Display Port) to my HD flat-screen monitor in my living room. The HD flat-screen monitor does both VGA and HDMI connections. I can do a Mini-Display Port to VGA adapter to connect them. -Or I can connect an HDMI to DVI cable and to a Mini-Display to DVI adapter to make it work. BUT which way is better and will give me better resolution?
Thanks.
Message was edited.

How do I upgrade my hard drive with Firmware - via Macbook Pro 13.3"

What is the best way to update firmware for a 400GB Samsung HM400LI 5400 rpm
hard drive?
The firmware file is a .exe file and since I am on my macbook pro I don't see
how I can do that.
Drew

Windows in Parallels and Windows under BootCamp are two totally different animals. When using BootCamp, you are booting directly into Windows. Windows has direct access to all hard ware. When you use Parallels, you are in a virtual Windows environment and all hardware access is done through OS X. However, having said that, I don't know how that SSD firmware updater works. There is a possibility that it may not like the way the EFI firmware talks to the drive. Most of those utilities are designed to work with machines that use a BIOS. It's probably best if you just confirm with the manufacturer if it will work or not.

Printing wireless via Macbook Pro but not via iPad

I was able to install, print my HP Deskjet InkAdvantage 3515 from my Macbook Pro but when tried printing using my iPad, AirPrint printer not available. How come? Did set-up wireless config in printer too.

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Install Ubuntu on a G3 iBook with a failed optical drive via MacBook Pro

I have a G3 iBook that has a failed drive. I want to install Ubuntu on it, but the CD-drive won't read discs anymore.
I do have a MacBook Pro. Is there anyway I can put the Live CD into my MacBook Pro and have the iBook boot from my MacBook Pro's optical drive?

The way I read the Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=303118
That would only work if the iBook, too, is running OS X 10.4. (It may be; but it may not. I take it that it's the MacBook in OS X 10.4.7, Wayland?)
I'm not sure you would have to boot from the Ubuntu disc in order to install from it (never having used Linux). If you do have to boot from the Linux disc, I'm not sure FireWire Target Disk Mode will work at all for this purpose, since FireWire Target Disk Mode is a feature of OS X.
You may want to ask about this in the Unix Forum, Wayland.

Airport/Time Capsule - Slow via macbook pro wifi but fast via wired iMac

My wired imac that connects to the time capsule reads about 17mbs. But when I do the speed test that is connected wirelessly it runs at 2mbs. does anybody have any clue on what I am doing wrong? or why the speeds are so slow via my macbook?

KenRN wrote:
does anybody have any clue on what I am doing wrong?
i'm not sure you're doing anything wrong. for starters, a hardwired (gigabit 1000 mbps) connection is way faster than wireless-N (at best 300 mbps).
you could try if changing the channel your wireless network is broadcasting on brings about a bump in speed. you might be suffering from _*wireless interference*_.
perhaps one of your neighbor's wireless networks is interfering with yours. download iStumbler and note the channels of the other networks in your vicinity. select a channel that is as far away from those as possible.
JGG

Help needed to somehow link ipad to internet via macbook pro's ethernet

Hi all
i have just picked up a new iPad 64gb wifi+3g.
I work on a ship where i have a slow but reasonable ethernet connection to the internet.
what i would like to do is use the MBP as a wifi hotspot or via usb cable to share the internet connection.
I have trolled the internet for help on this and managed ( i am pretty new to this ) to find out about sharing the internet settings either by aiport which i asusme is wifi and also usb iphone cable.
When i activate the airport the ipad sees the network and connects with all bars but if i try to connect to the internet in safari or bbc news app etc i get "not connected to the internet message"
can anyone help with idiots guide for settings i should be using on both MBP and iPad to do this correctly?
All help greatly appreciated.
Rgds
Kev

Hi
I have my MBP connected to the internet via ethernet cable and this is working ok.
I then went into settings and shared the internet by ticking airport / wifi and usb iphone cable. Both together and individually.
i setup a network and gave it a "test" name with and without wep 5 digit password and with and without firewall.
the ipad sees the "test" network and asks to join and i have selected this both with and without password.
Ipad then shows full bars on strength but no internet connection.
I have yet to work out how to do the connection on the iphone usb cable so nothing to go on there.
I will try again and make a note of the IP addresses on both and post them to see what you think.
As far as i can follow i seem to be doing it all correctly unless making a simple mistake along the way.
cheers
Kev

Streaming to twitch.tv via MacBook Pro?

I was wondering if anyone had a surefire way of streaming things from a console, to the laptop, to twitch.tv. I was told using Flash Media Live Encoder and Camtwist is a starting point. Would doing HDMI out from the TV allow me to broadcast that through those programs onto twitch?

http://www.amazon.com/Blackmagic-Design-Intensity-Extreme-Playback/dp/B007CYJ4WM
or
http://www.amazon.com/Elgato-Capture-PlayStation-Recorder-10025010/dp/B00840353W
in your guys' opinions?

TS1501 transferring a small batch of photos from the new ipad to macbook pro (this way you can upload one album at a time, file them into a new album on macbook pro) Pls. advise.

How can I transfer a small batch of photos from the new ipad to macbook pro? In theory, I should be able to keep my albums together this way (once uploaded to macbook pro, i can easily file them into a new album on macbook pro.) Not working for me! Macbook pro does include iphoto. I had no problem uploading ALL photos (3 or 4,000.) Help! Goal is to keep albums together.

Hi all,
Goal: Backing up photos!
Hope: Transfer ALBUMS from ipad to external drive (via macbook pro)
Is this possible? Or will I have to create a file name for each of my thousands of photos?
UGH!
HELP!
Lee

Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

HT1386 My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My macbook pro cannot connect to internet via wifi

I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
Monireh

When you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Fidelity ATP via Macbook pro

Similar Messages

Maybe you are looking for