Field addition in Attribute Profile (Dispute Management)

Hi Friend,
i am trying to add the field in dispute management attribute profile. But values are not updating in dispute case.
please suggest. How to add the new field in UDM_DISPUTE attribute profile.
Thanks in advance.
Regards
Ram

you need to look at the enhancement for completion of cases, which is under the process integration with AR
The name is FDM_AR_DISP_COMPLETE .
You would need to add appropriate coding to make the values available and populated.
Regards
Hein

Similar Messages

Function Profile Dispute Management

Hi Can somebody tell me what is function profile in dispute management. I am not asking for the definition but I need to understand what effect functions in function profile, Push button, seperator after push button, sequence number etc. have on our dispute case.
Thanks
Nik

Hie Nik
This may be a late response, but anywhere just incase you still looking for an answer, a function profile is a set of buttons that are displayed by means of the attributes. These buttons perform a function, eg Save, Display/Change, Delete, Print etc.Case Management will allow you to define which function you would like to use and you can specify on which number it should come usine the sequence number, eg 1 can be save, 2 can be delete, 3 can be Create Correspondence etc, then teh Seperator simply mention whethere there should be a seperator before any given function.
With this function profile you then assign it to a case type, so that when in your case you can perform any of the function that you would have inoute inyour configuration, hope this helps.

How to do the new created field in User Attributes, show in Manager GTC

Hello Guys,
I have a Connector GTC working perfectly. Now I created a new field in User Attributes and I need make this field appear in "Modify Connector Configuration" of "Manage Generic Connector" without having to create a new Connector.
If I create a new Connector this field is showed normally, but this connector has a lot of mapping between the existing fields, I need only that a new field is displayed.
How to I do this?
Thanks

Not sure what version of OIM you are using but check Bug: 12812650
-Bikash

Case Management - Attribute Profile

Hi Folks,
I am working on a CRM 4.0 -> 7.0 upgrade project. We are facing an issue related to Case Management.
After upgrading the system to 7.0 the case managment search/create dumps. We figured out that this was due to the case attribute profile that was attached to the case type. SAP told us that in CRM 7.0 the Attribute Profile approach for extending case attributes is no longer valid and easy enhancement workbench needs to be used to create the attributes and then data from the older table needs to be migrated.
I have 2 questions -
1. When should the attribute profile approach be used to enhance case management with new attributes and when should EEWB be used?
2. Is there a now a way out for us or we will have to use EEWB to add all the attributes agian? Has anyone encountered this before?
Kind regards,
Gaurav

Hi Anil,
Please refer to the below link for the BADi used in Dispute Case Processing.
http://help.sap.com/saphelp_afs64/helpdata/en/58/f01e3f41989310e10000000a114084/content.htm
SCMG_VALIDATE_C - This BADi might give you an option during case change/creation to apply your requirement.
Moreover maintain all the reason code s before hand in config, which I am sure you have.
Cheers!

Sharepoint 2013 - Active Directory Import User Profile Property manager fields

Hi there,
I juste encountered actually a little issue regarding the Active Directory Import User Profil.
Importation seems to work well but I have a little problem regarding the Manager field.
When I verify a user profil through the sharepoint admin page ("Manage user profil") , I can see the manager field is correctly populated, but if I want to check my profil as a user (personal information), the manager field is not visible.
With Sharepoint Admin and Manage Profil Properties, I haven't the possibility to modify some settings for the manager.
For example, Policy parameters is greyed.
The only way I found to show this field in a user profil is to give the permission "allow users to Edit values ...".... setting I don't want to set.
Have you already this sort of issue ?
Thanks for your help/idea.

Hi Michael,
I don't remember well what I did exactly regarding this issue because I played a lot with user profil.
I know I used this powershell script from Sheyia which in fact help me a lot to clean and create a good profil setting.
http://blogs.technet.com/b/sheyia/archive/2013/10/09/sharepoint-2013-another-way-to-change-order-for-user-profile-properties-via-powershell.aspx
For example, this script help me to resolve some double entries.
Let-me know if it help you (or not of course)

Question on dispute management status profile

Dear Friends,
I have a quetion on SAP FSCM dispute management status profile. While setting up the status profile we would specify the status values. A number is assigned to each status and it will have corresponding system status. In the standard delivery the numbers assinged to status are (10,20,30..etc). Does any one know what is the significance of these values? My question is it required to use this numbers or it can be anything.
Any help will be greatly appreciated..

Hello,
The status profile is used by definition of the Case Management configuration behind each Dispute.
A number is assigned to every step, and the number controls changes in the status, and can only be moved to a new number if it is customized to do so.That forbids you to jump into undesired states...
My general recommendation is keep them in ascending order, since the default when opening a case is to give the lowest value, and generally, closed cases are 98 or 98.
Configuration is done via: SPRO->FSCM->Dispute Management->Dispute Case Processing->Status Management->Create Status Profile.
Here is an Example for Legal Claim:
10     10-New Case     001
20     20-Pre-Presentation of Case     002
21     21-Case Presentada     003
22     22-Case - Rejected     003
23     23-Case - Ammended     003
30     30-Payment Order      003
40     40-Personal Notification     003
41     41-Notification via Advise     003
42     42-Notification via Presentment of Charges     003
43     43-Notificatio via Conculding Behaiviour     003
50     50-Rebuttal     003
60     60-Proof     003
61     61-Questionning to the Parties     003
62     62-Testimonies     003
63     63-Document Exhibit     003
64     64-Judicial Inspection     003
70     70-Final Debate     003
80     80-Sentence      003
I hope this answers your question.

Dispute Management -Default for customer define attributes

Dear All
We have added profit center in table UDMCASEATTR00 and then add it in the attribute profile. Now based on the open items we want to derive the profit center. Is there any BADI for this.
Thanks and Best Regards

Hi Farhan Qaiser,
We have the similar requirement in dispute and collection that we are implementing at our firm Would you be kind to offer me guidance in steps on how you approached to achieve profit center in dispute cases.
Thanks
David

Add Custom Field in Dispute Management of Sap FSCM

Hi All,
I have a requirement to know about the sap standrad BADI which can be used to add a Custom Field in dispute management. So can anybody who have done the implementation or knowing about the FSCM Dispute Management with this type of user specific requirement to include in dispute manangement, please help us to find this BADI name.
Any help with in this regard would be appreciated.
Thanks,
Rajesh
Message was edited by: Mark Chalfen

You will have to first create the custom fields in the strucutre ‘CI_UDMCASEATTR00’ and then include the structure in table UDMCASEATTR00.

MRP profile custom field addition

Dear experts,
Is it possible to add a field to the MRP profile list of fields that come in MMD1/MMD2? I observed that not all the fields that appear in the material master MRP views are part of the MRP profile.
Thanks
Suman

Hi,
Can you let us know which fields you do not find in MMD1 ?
Regards,
Vivek

Dispute management - workflow

Hi
Is there anything additionally required to get the workflow in Dispute Management going? I have activated / completed the task specific customising but nothing is happening.
Also, where is the option to send WF messages as express?
Thanks
Hein
Edited by: Hein on Jun 26, 2009 12:20 AM

Hi Neeleswar,
Could you please give further information on where exactly I need to activate the task in Dispute Management?
In my model the modeler I have created an additional node for Workflow
- for all elements
- for all roles
attribut ANCHOR
and value WFATT
Is this required- Is this part of your statement ""Add PROCESS in dispute case type.""?
Best regards
Hein

FSCM Dispute management workflow

Hi All, I have activated the workflow WS01700044 for dispute management email and notifications.
event: NONPROFESSIONALUSERSET
This event get triggered when dispute case is created or changed.
Now my issue is when I create a case, it is sending a mail to processor of case. But if I change the processor in t-code UDM_DISPUTE, it trigger the event and workflow but it is ending with error because field RECIPIENT in event come blank hence email step goes into error.
I have checked all email Ids are maintained in respective user profiles. Even it sends mail in create.
IF anyone know how to correct it, plese let me know.
Thanks,

Hi -
Even if you HAVE maintained an email address in the user profile, emails are not automatic.
Check with your Basis person to make sure outgoing emails aren't blocked.
You should also check the workflow status from within the case itself. The 044 workflow is pretty clear on showing that there will be a red box because a workflow event failed. Check there and report back here.
D

Is there a way to hide some reason codes in dispute management without deleting?

Within SAP Dispute management (UDM_DISPUTE) we would like to remove some of the available reason codes in the drop down on the search screen and available to assign drop down, but not physically delete them. Is there a way to do this?
I know if I physically delete them out of the Reason code list (SPRO -> FSCM -> dispute management -> Dispute Case Processing -> Case types -> Create Values for Attribute "Reason") then if an old dispute case that used that reason code is displayed, the four digit number code will be displayed rather than the description. So we would prefer to not physically delete the code / description from the reason codes but somehow make them non-display, or inactive.
Any thoughts on this?

Hello Stephen,
you may consider the functionality "personal list", putting all valid reason codes in and leaving out those you do not want to show. Maybe your Authorisation / Security Team can also help you performing this exercise for all affected users at once.
Regards,
Christoph

Dispute management - please help

Hi Gurus,
When I search for a dispute case using transaction UDM_DISPUTE then getting error below. It is not giving any additional information. When I click the message then I am directed to main menu.
no RFC destination could be determined for the method call
Please help,
Regards,
Pavan

Hello
Blue print document is confidential and varies from company to company, how ever I would try to give you some guide lines.
- Understand the scope of sales and distribution, what sub modules of SAP and current business processes have been decided.
- In principle you need to understand the "order to cash " cycle
- At every SD process, relate to FI what documents are being generated
- Some processes like master data creation, credit management policy of the client may be common to SD and FI, so they would part of both the processes
- Use ASAP questionnaires and get feed back, comments and arrive at final list of processes in AR, credit management, collections and dispute management
- Make visio and flow charts for every process in minutest detail
-For every process, ensure , visualise the configuration, test scripts, user manuals etc, so that they would be prepared with ease in the next stage
Reg
assign points if useful

DISPUTE MANAGEMENT - RMS ID

Hi,
I created a custom RMS ID while configuring for the DISPUTE MANAGEMENT in the development environment. But when I go to UDM_DISPUTE transaction and try to change the RMS ID I see only S_CM_DEMO in the list. I don't see even the SAP standard RMS ID UDM_DISPUTE.
Can anyone help me with this?
Raj/

Hello Raj,
Maintain field RMS ID value * in the authorization Object S_SRMSY_CL .
By default the value for the RMS ID is S_CMG_DEMO so that you will be getting only one value.
This resolves your Query.
Regards,
Naresh.

Using additional userprofile attributes from LDAP

Hi,
my users are inside an OpenDS LDAP-Server connected to SSGD 4.41 - all works fine.
I would like to store some additional SGD attributes like
UserProfile.Multiple = yes/no
(Multiple: Whether someone may log in using this user profile and whether this user profile will be shared by multiple users in the form of a "guest" account.)
also inside the LDAP (extending my own LDAP-schema).
Question: How can i tell SSGD to use this attribute UserProfile.Multiple from LDAP instead of looking into the
local repository ?
regards
Danny

Hi Danny,
I don't think you can do this, as user profile data is never read from the LDAP directory. LDAP users always have to be mapped to a local profile (from the SGD datastore), meaning that any attributes on the user object from the LDAP directory wouldn't be considered when evaluating a user's profile.
Does anyone else have a take on this?
-- DD

Field addition in Attribute Profile (Dispute Management)

Similar Messages

Maybe you are looking for