Field Authorization Groups for partners and texts

Hello,
We would like to use the Field Authorization Groups in the customer master to restrict update of specific fields. One problem we face is that we can't seem to find a way to restrict the authorization on the partners and texts. Has anyone come across this issue and found a solution? If so, could you please share it with us?
Thanks,
Christine

Hi,
For the text this is clearly not possible.
Text is an additional component above of the transaction. It is not fully integrated. So there are some limitations
For the partners. I guess you mean partner functions of a customer.
I'm a bit surprise. The fields below should be customizable
KNVP-DEFPA
KNVP-KNREF
KNVP-KUNN2
KNVP-LIFNR
KNVP-PARNR
KNVP-PARVW
KNVP-PERNR
Hope this helps
Alain

Similar Messages

Authorization Group for G/L Account

Hi,
What?
- I wish to restrict the 'posting' of a G/L account to be done by certain users only
How?
- What I have done was...
a) From FS00, I have added a free-text (BANK) into the Authorization Group for a G/L account
b) From PFCG, a new role was created to allow these 2 Authorization Objects, F_BKPF_BES and F_SKA1_BES
c) 'BANK' was entered for the Authorization Group for both these 2 Authorization Objects
d) From there, I have assigned this new role to the user that I wish to allow Posting of the G/L account
Problem?
- Other users still can do Posting for this G/L account
- Any steps which I have missed out here or done wrongly?
Thanks,
Brandon

Hi,
Some other roles of the users may override and cause the users to post against this GL account.
Check all the roles relevant for the restricted users.
Use SUIM t-code to find if the auth object mentioned above is included in any other role.
If it be, restrict that again.
Generally if one role as no restriction against this auth and not all, this issue tends to happen.
Regards,
Sridevi

How to create authorization groups for G/L Accounting

Hi:
I have a problem with authorizations groups in FI, I hope you could help me.
We want to control access to accounting in FI by authorization group so user only can work with some G/L accounts.
I have seen in transaction FS00, in control data tab, a field called Auth. Group, but I really donu2019t know if this is the right field.
Do you know how I can control access to G/L Accounts by Authorization Groups? Perhaps must I to create a new Authorization Group by roles? We have 4.6c.
Please, any help is welcome.
Thanks in advance.

Hi
Update the authorization group field in the GL master with any user defined value and then include the same in the respective user roles against the authorization object - F_BKPF_BES-BRGRU in PFCG
Ensure you have updated 'Authorization group' for the GL accounts in your chart of accounts
Thank You,

Carrier Details on Field status group for vendor master

Hi,
I have a requirement to make the SCAC and Carrier freight group as required fields on vendor master .
but the standard SAP system requires/ allows three fields : SCAC , carrier freight group and Service agent procedure group as mandatory to be activated under the 'carrier details ' column in the field status group (transaction OB23 and OBD3).
I want to know if there is a way to flag just the SCAC and carrier freight group as required fields for entry in vendor master .
Thanks
Naga Yarramsetty

Hi All,
Thanks for your reply. With user exit and validation, I cannot create mandatory mark in FS00. Actually SAP make this description always mandatory. But there is no mandatory mark in this column. I just want to create mandatory mark in this column. Need you advice.
Thanks,
John

Field Status Group for Special G/L Indicators

Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well. But when it comes to general posting, they have different screen numbers. One SAPMF05A 303 and the other one is SAPMF05A 304. How did this happen?

Hi Noel,
As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
Regards
andrew

I want to create a authorization group for cic0 tcode.

i want to create a authorization group for cic0 tcode.
in detail...
in cic0 tcode i will enter business partner name
and press enter it gives me list of same names..
i want to restrict as per the region..there...
for exapmle....
if i enter name as raja
it gives me a list of raja in all region
but i want for a particular region....
how to create a authori object.....................
Regards
Anbu

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
If you start SU21, find the authorization object and double click on it you should be able to see who the author is.
Or you can findout through SUIM

Creating Authorization groups for material types

Hi All,
I have a requirement to create Authorization groups for different material types we have in our company. Basically these are intended to restric the users from accessing the material master. Different material types needs to be assigned to differnt group of users.
So if we can create couple of Authorization groups, then I am thinking of assigning the material types to these groups.
I went to SPRO---Logistics general ---Material master -
Tools --- Maintain authorization and authorization profiles. TCODE : PFCG
Is this the right path?
Please advise
Shane

Hi All,
I don't think SPRO---Logistics general -Material master- Tools --- Maintain authorization and authorization profiles is the right path to create new authorization groups.
Can anyone explain how to create new authorization groups for different material types. The purpose is to create a role and assign this auth. group to this role and provide that security role to specific users.
Regards
Shane

Selection groups for tables and header tables

A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
Thanks!
Harmeet

Hi Harmeet.
Since you mention you can only filter by date I am assuming you are using TDTIM.
How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
CNVMBTSELMEMTYPE               MBT PCL Selection group member types (main table to define members => fields for the selection group)
CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
Hope this helps,
Rui Dantas

Authorization group for table maintenance view

I need to create table maintenence view for a custom table, client provide name for auth. group, but no clue how to create auth. group.
can someone provide the steps to do this?

Hi,
Follow below steps to create table maintenance for a table and to assign authorization group to a table:
step1: Go to SE11 enter the table name
step2: In the standard toolbar you will find UTILITIES
Go to UTILITIES -> TABLE MAINTENANCE GENERATOR
You will go to first screen of Table maint. gen.
Here you will find to enter authorization group.
Thanks and Regards,
Shravan G.

Limit Security by Excluding Authorization Groups for S_TABU_DIS

Is it possible to assign security for object S_TABU_DIS by excluding authorization groups in lieu of including all authorization groups for which security is to be assigned.
Thanks,
Barbara

Yes, some fields have cross-object relationships. For org. levels it is much the same.
There are limits to these fields - you can over-ride them or bypass the checks, but it is no guarantee that it will work.
There are many "tools" ouside of PFCG which do this... without respecting the limits.
Do not be surprised if it does not work, or you have perforamce problems, or strange user experiences....
Cheers,
Julius
Edited by: Julius Bussche on Oct 5, 2009 10:53 PM

Recording 'partners' and 'texts' in VA01 Tcode

Hi,
while recording VA01 tcode i'm not able to record partners and also texts.
can any one tell me how to record the partners and texts in VA01.
Thanks & Regards,
Prasad.

Prasad,
In regards to Text, you can save text using FM 'SAVE_TEXT' provided you know the ID and OBJECT. For Sales Order Header text usually the OBJECT is 'VBBK' and the NUMBER is '<SO Number>'. For Sales Order Item text usually the OBJECT is 'VBBP' and the NUMBER is '<SO Number><Item Number>'. You will have to find out the ID of the Text from its attributes.
Thanks

My iPhone no longer gives me audible alerts for email and text messages. Just stopped. Help.

My iPhone just stopped giving me audible notifications for email and text messages. It still rings for calls. I have checked the settings for "Sounds" and they have not changed. However, in these settings when I try to change the sound I get only the vibration and not the sample sound. Can anyone help?

Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden

Is there a way to get seprate notifications on Droid Razor m for email and text?

Is there a way to get seprate notifications on Droid Razor m for email and text?

For Gmail it is: open Gmail > menu > settings > your gmail address > notifications check box is unchecked.
There are some additional notification options for labels too.

Droid Mini notifications for email and text not working

I am having a problem with notification sounds not working for email and text messages with my Droid Mini. I took my original phone to the Verizon shop. They did a factory reset. Sound worked for two days. Went back to Verizon and they reset it again. But they did tell me if it happened again to call Verizon and they would send me a new phone. Well it happened again. Got my new phone just last week. Well yesterday and today the sound notifications for text messages and email is not working on the new phone. Last night I powered the phone off and back on and all was working well until this morning.
This is very upsetting as I really do like this phone. Would like to know what is going on with it. Have checked all the volumes and they are all up.
Is there a fix for this.
Thank you.
Barbara
Edited to start new discussion and private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

For Gmail it is: open Gmail > menu > settings > your gmail address > notifications check box is unchecked.
There are some additional notification options for labels too.

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Field Authorization Groups for partners and texts

Similar Messages

Maybe you are looking for