Field Bank Country by default.

Is there any  by configuration that when is a hiring for USA in the infotype bank details(0009) in the field Bank Country appear US, and when is a hiring for Mexico appear MX.
But not by developing  ABAP.
Is part of HCM?
Regards,
Wilman

Hi,
It automatically gets the country key of the company code to which the new hiree is assigned.
Thus,  in V_T001P, if your company codes are assigned to US and MX respectively, then the country key in IT 9 will be filled correctly during hiring action.
Best regards,
Dilek

Similar Messages

  • Validation of bank country key in IT0009

    Hi all!
    I would like to check the value in field "bank country key (BANKS)" against a Z-table at the time of info type 0009 creation/modification. Can you recommend an exit or is in HCM something similar to SAP-FI's validation rules / BTEs etc.?
    Thank you. Michael

    Use BAdI HR_HRPAD00INFTY, AFTER_INPUT method. 
    After upgrading, we found that UserExits do not work from Portal.
    (Ted's reply points to a UserExit)
    Hope this helps
    Kirsten

  • "entry in field bank account number is longer than 10 characters"

    Hello Sap Experts,
    The user is getting an error on saving the bank infotype. (0009). The user is trying to create a IT0009 for an international assignee.The error is "entry in field bank account number is longer than 10 characters.
    The default characters allowed maximum specified in the technical field is 18 characters. The abaper also checked and confirmed that it is specified as 18 characters.
    This is only for a single employee.
    Please provide your suggestions.
    Thanks
    Jyothsna

    Jyothsna,
    You need to extend Bank Account number length....even though 18 will be the max length..by default assignment of length will be different from country to country. So you need to extend the length of Bank a/c number in trasaction OY17.....select the country and change the bank a/c number length to 18 and Checking rule to 5 max value length.
    Mohan

  • Bank Country and Bank Key?

    Hi,
    Two questions which I am not very clear.
    1. For bank country, is the country the bank(branch) located at? For example, company in China have a vendor in US, and the bank of the vendor also in US, so the bank country should be US?
    2. Bank key. I heard that some country had a bank directory, and all will use a same bank key. Is this right? In China, and Hongkong, I did not find a defined bank key list, and we use our own naming conversion to define the bank key.

    Hello Kerry Liu,
    Bank country is the field that identifies the country in which the bank is located.
    The country key defines the rules according to which bank data, such as the bank and account numbers, is to be validated.
    Bank Key-In this field, you specify the bank key under which bank data from the respective country is stored.
    When you define the country key, you also specify the country-specific definition of the bank key.Normally, you manage banks using their bank number. The bank number in the control data for the bank is then displayed twice, that is, as the bank key too.In certain countries, the bank account number takes on this function; then there are no bank numbers and the bank data is managed using the account number.
    For data medium exchange, you may find it useful to be able to enter foreign business partners without a bank number, even if there are bank numbers in the country in question. In this case, the bank key can be assigned internally.
    To manage bank data using another key, for example, the SWIFT code, external number assignment can also be used.
    Hope this helps. please assign points.
    Rgds
    Manish

  • How to add a search help to a field  Bank Type in Transaction FK02

    Dear All,
         How to add a search help to a field  Bank Type in Transaction FK02.
         Is there any possibilty of using  exit or searc help or domain to solve this problem.
            Thanks in Advance..
    Thanks,
    Lakhsmi.

    Hi, Tamas,
    I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    The correct code is like:
    CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
    Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
    Xin

  • More than 1 bank country for payment program possible?

    My organisation is based in France and we have paying house banks in France and the USA. For domestic payments in France in EUR, we defined a payment method and this works fine. For our USD payments with the bank in the USA, we need to have a seperate payment file for payments only in the USA and a file for all USD payment outside the USA.
    In FBZP, i can only customize the setup for domestic payments for our company code country France. Is it possible to have another bank country added to FBZP or does anyone know how i can differentiate between for our USA bank between a "domestic USA" file and a file for USD outside USA?
    Thanks in advance for your help and advice,
    Marlies

    Hello Marlies,
    yes you are right, you have to make different entries in the vendors masterrecord. An alternativ could be to use the "Free selections" and make one paymentrun i. e. for LFA-LAND1 = "US" and another for LFA-LAND1 NE "US" but I do not recommend that because errors are preassigned.
    Well, the paymentprogram decides furthermore which paymentmethod is choosen. Indicating all vendors with all paymentmethods can cause errors i. e.
    Vendor 1 is domestic, Paymentmethod U for domestic bank transfer
    Vendor 2 is abroad, Paymentmethod X for bank transfer abroad
    Entries in Vendor master Record: U for vendor 1, Vendor 2 got X
    If UCX is entered in the initialisation of the paymentprogram all vendors are paid with "U", and this is wrong because the datacarrier for U has another file layout than for X
    Hopefully this makes it a bit clearer, if not, give me a sign....
    Best regards
       Horst

  • PA30 - field "Bank Control Key" hidden for Brazil company code

    Dear friends,
    We are facing problem when we use PA30 to create a Personnel nr. for contry Brazil. We need to have the field Bank Control Key visible in the screen but only for other countries this is opened.
    Does anyone knows the way to setup PA30 to have the field Bank Control Key opened in the infotype Bank Data where we can enter a specific content to Brazil ?
    BR,
    Alessandro

    Hi,
    In this table T588M you can make change to the fields in your infotype.
    Hope it helps.
    Regards,
    Edoardo

  • Field ISO country code required in FBLN

    Hi Friends,
    We want to add field ISo country code from customer master in FBl5N display & we want to make subtotals on the basis of these fields.
    This field ( KNA1- LAND1) is not available in the dynamic fields . We also tried to add it in customisation in additional fields for line items,
    ( path : SPRO> FI> ARAP> Customer A/cs > Line items > Display Line items > Define additional fields for line item display),
    but we got error message No FC251- Table KNA1 is not allowed.
    Please Help
    Thanks & Regards
    Bhairavi

    Hello Meg
    Thanks for your reply. However I find that quite troublesome, as I'm based in the US most of the year for work, while during the rest I'm traveling overseas changing SIM cards in every country. After two years this is the first time experiencing this situation, and I already have several clients from abroad indicating a change on my phone number when they text me trough iMessage.
    Hope I can find a solution soon.
    Thanks and Best Regards

  • Setting fixed the exchange rate field (KUFIX) ticked by default me21n

    In the transaction ME21N to create purchase orders, there is a field to fix the exchange rate (KUFIX). We want to set this field to 'X' as default value, when the user call the transaction. Does anybody know a user exit or a BADI where I can modify/set this field.

    Hello everyone,
    I'm also have the same requirement.
    Any way to set a default value to KUFIX field?
    Thank you.
    Anthony

  • Changing the field of Country of Destination in PO

    Hi All,
    We are using Import tab in the PO , Item level> Import Tab>"Origin/Destination/Business"> there is a field for Country of destination, i know this is coming from the Plant code country and this is always greyed out in ME21N/22N.
    Is there any availability to change this field from greyed out to changable mode, so that we can chnage it whenever we required while raise PO's.
    Thanks in advance..

    Hallo Jürgen,
    yes this is a special case for the importing of materials.and when they do third party PO then also it's taking the same country of destination from plant e.g it should take Customer country and not Plant country...
    I even changed manually the delivery address but it still do not change the country of dest.(this case is for normal stock Po from import)

  • Standard field for Country of Despatch in condition table

    Hello All,
    I want to created a condition table with Despatching Country, Destination Country, Tax Classificatio of Customer and Tax Classification of Material.
    In the allowed fields for selection, I am able to get the field LAND (country of despatch).  I have created the condition table and assigned in the access sequence.  But when I see the analysis in the sales order this field is picking destination country.
    I do not want to include Z field in the KOMK/KOMP struture, I want a standard field.  Can anybody hlep me out............
    Thanks & Regards,
    Sreehari.

    At my end, its absolutely right?
    TKOMK-ALAND is based on delivering/supplying plant.
    If that is not the case, then it is not standard, where TKOMK-ALAND is is not equal to T001W-LAND1.
    Take assistance of ABAPer in your team & check whether  any enhancement (Program MV45AFZZ, Form USEREXIT_PRICING_PREPARE_TKOMK) is done.
    Say, in enhancement sales organization country is used as the country of departure.
    Regards
    JP

  • Housebank field should come as default in invoice by substitution

    Dear Gurus,
    I want to make the house bank field to be defaulted at Invoice. I am trying with substitution.  But I am not able to get the housebank field as the substitutable field.
    Anybody can help me out in this issue. I am able to get the account ID as substitutable field where I select the call point as 2 (Line item). But I am not able to get the house bank field.
    Thanks in advance.
    Regards,
    venkata Reddy.Mudda

    Hey Yoav,
    I thought that was not your question
    Anyway, how things are going in Edge?
    Regards,
    Eli

  • Forms wizard does not allow what type of field to use as default?

    I have Acrobat 9 and am creating a form that has ober 300 fields (for logging calls).
    The issue I have is when starting the wizard, it defaults to creating all 300 fields as TEXT boxes. I'd like to have them as COMBO BOXES. I see no way to change them or to change how adobe 9 creates them at start up of the wizard.
    I know I can do them one at a time and even copy and paste groups of them, but they don't line up as well when I do it this way.
    Any ideas?
    Thanks

    Hi!
    Thanks very much for your reply. Precisely what I'm hoping to do is stamp annotations--to the point that I've prototyped three whole toolbars of fixtures, sensors, and wall controls with mocked up rubber stamps, and marked up several whole buildings worth of construction plans to show the concept.
    Okay--so the stamp annotation looks terrific. How do I find out more? The Acrobat 9.1 SDK (under "Plug-ins and Applications", then "Creating Annotations") says this:
    Several annotation types exist, which are identified  by their subtype. Each subtype can have additional properties that  extend the basic ones. The subtype for text annotations (also called  notes) is text. The subtype for link annotations is link. The Acrobat  core API contains two built-in annotation typedefs PDTextAnnot and PDLinkAnnot. A PDTextAnnot object corresponds to a text annotation and a PDLinkAnnot object corresponds to a link annotation.
    That paragraph (and the subsequent pages in that chapter) led me to think that my options were:
    Text annotation
    Link annotation
    3D annotation
    Dive into the Cos layer and create a custom annotation
    Where can I find documentation on the Stamp annotation? (I do have the Stamper sample application.)
    Thanks again,
    John Murdoch

  • Issue with Popup LOV field not clearing out "default" value

    I am using APEX 4.0 & Oracle 10g
    I have a form that displays a default value on a "Popup LOV" field (say P1_POPUP) when the Form is initially displayed to the user. The default value is part of the Popup LOV list of values. If the field is "manually cleared" *i.e. I clear the default value by backspacing and don't touch the LOV) and I Refresh (submit) the form (REFRESH button to display the same Form again), the default value is still displayed.  
    In Post Processing, I debugged the value of P1_POPUP to see if holds the default value and yes it does. I was expecting no value in P1_POPUP.
    Is this an APEX standard behavior?
    Any way how I can get rid of this value on an manually clearing action of this Pop Up field?
    Looking forward for your response.
    Thank very much in advance.
    Ed.

    I apologize, the default value was NULL indeed. However, it seems like I may need to manually clear this value so that it will not be displayed.

  • Outgoing Payment - Bank transfer method default

    Where / how is the default G/L set on the Bank Transfer tab of the payment means on an outgoing payment? 
    I want it to default to a new banks G/L account but I can't seem to get it to change.
    Thanks

    It is being derived from G/L Account Determination > Purchasing Tab > Bank Transfer GL

Maybe you are looking for