Field catalog required between internal table

Hi firneds
My ALV output showing the data like this
Consinee consine state Quantity Amount unit.
xyz           delhi              10          10.20 UA
xyz           delhi              20          10.20 UA
xyz           delhi              30          10.20 UA
xyz           delhi              15          10.20 UA
Total                                             40.80
xyz           delhi              10          10.20 UA
xyz           delhi              20          10.20 UA
xyz           delhi              30          10.20 UA
xyz           delhi              15          10.20 UA
Total                                             40.80
here if i down load to excel it is showing same but want to like this
Consinee consine state Quantity Amount unit.
xyz           delhi              10          10.20 UA
xyz           delhi              20          10.20 UA
xyz           delhi              30          10.20 UA
Total                                             40.80
Consinee consine state Quantity Amount unit.
xyz           delhi              10          10.20 UA
xyz           delhi              20          10.20 UA
xyz           delhi              30          10.20 UA
Total                                             40.80
Every total after the column header shuold repeate how can i achieve this
REgards
RK

you can jsut pass these texts of header as data to those lines after total..
but is the TOTAL coming form SUBTOTAL fucntionality or its a row inserted by you!!!

Similar Messages

ALV display using dynamic field catalog and dynamic internal table

hi ,
please guide me for ALV display using dynamic field catalog and dynamic internal table.
Thank you.

Hi Rahul,
maybe thread dynamic program for alv is helpful for you. More information about the [SAP List Viewer (ALV)|http://help.sap.com/saphelp_nw70/helpdata/EN/5e/88d440e14f8431e10000000a1550b0/frameset.htm]. Also have a look into the example programs SALV_DEMO_TABLE*.
Regards Rudi

Building Field-Catalog for dynamic internal tables

Hi All,
I created a dynamic internal table(<fs_final>,<fs_final_line>) and populated data into it.Now I want to provide field catalog to these dynamic internal table.
Can anyone suggest me the how to create a field catalog for existing dynamic internal table.Thanks in advance.
Regards,
Chakradhar.
Moderator message - Please use proper subject line in future.
Message was edited by: Suhas Saha

Use this code to get all components of internal table.
Then build fieldcatlog.
DATA: tab_return type abap_compdescr_tab,
 components like line of tab_return.
perform get_int_table_fields using <fs_it> changing tab_return.
loop at tab_return into components.
wa_fldcat-fieldname = components-name. "Field Name
wa_fldcat-scrtext_m = components-name. "Column Heading
wa_fldcat-inttype = components-type_kind. "Data Type
wa_fldcat-intlen = components-length. "Data Lenght
wa_fldcat-decimals = components-decimals. "Data Decimal Places
append wa_fldcat to it_fldcat.
endloop.
form get_int_table_fields using t_data type any table
 changing t_return type abap_compdescr_tab.
 data:
 oref_table type ref to cl_abap_tabledescr,
 oref_struc type ref to cl_abap_structdescr,
 oref_error type ref to cx_root,
 text type string.
*Get the description of data object type
 try.
 oref_table ?=
 cl_abap_tabledescr=>describe_by_data( t_data ).
 catch cx_root into oref_error.
 text = oref_error->get_text( ).
 write: / text.
 exit.
 endtry.
*Get the line type
 try.
 oref_struc ?= oref_table->get_table_line_type( ).
 catch cx_root into oref_error.
 text = oref_error->get_text( ).
 write: / text.
 exit.
 endtry.
 append lines of oref_struc->components to t_return.
endform.
Regards
Sreekanth

Records need to be passed between Internal tables

Hi Experts,
I'm working in BADI and have three internal tables say IT1, IT2 and IT3 where BELNR is the key field for all the tables. Now I have a field RECEIPT from IT1.
My requirement is, I want to fetch only those records where IT1-RECEIPTS = X and then need to pass only these records to IT2 and IT3.
Is there any possibility to pass the records between internal tables. Please clarify me as how can I achieve it.
BR,
RAM.

Hello,
DATA: wa_tab LIKE LINE OF it1.
LOOP AT it1 INTO wa_tab WHERE RECEIPTS EQ 'X'.
APPEND wa_tab to it2.
APPEND wa_tab to it3.
ENDLOOP.

Move Field symbol data to Internal table

Dear All,
 Please suggest how to move field symbol data to internal table. The requirement is I have dynamic data in Field symbol which to move to table parameter of a function module.
Thanks in Advance
Rams.

Dear All,
 In need to pass tabular data i.e. multiple entries from field symbol to the table parameter of the custom function module.
Field symbol is declared as below:
FIELD-SYMBOLS: <FS_EXCEL_TAB> TYPE STANDARD TABLE,
 <FS_TABLE_HEADER> .
DATA WA_PD LIKE PRICE_DOWNLOAD.
APPEND <FS_TABLE_HEADER> TO <FS_EXCEL_TAB>.
CLEAR <FS_TABLE_HEADER>.
WA_PD-VKORG = <FS_EXCEL_TAB>-VKORG.u201D Problem while using this statement
APPEND WA_PD TO PRICE_DOWNLOAD.
 CLEAR WA_PD.
Field symbol <FS_EXCEL_TAB> is populated like this.
VKORG | KUNNR_SH | KUNNR_SP |
0015 | 102105 | 102105 |
Now I need to move this data to table in tables parameter of custom fucntion module.
Thanks in advance,
Rams

How to get the field name of an internal table during runtime?

How to get the field name of an internal table during runtime?

Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
 DATA: v_field(60). " Insert this code.
 GET CURSOR FIELD v_field. " Insert this code.
 CHECK v_field = 'ITAB-KUNNR'. " Insert this code. (or)
Write: v_field.
Regards,
Ramganesan K.

How to add one more field to an exist internal table

hi abapers
i am a very new abap programmer and just started learning it.
i want to know How to add one more field to an exist internal table.
lemme me put my question in a very simple way.
i have a internal table having fields f1,f2,f3 and which also that internal also contains some data.
now i want to add two more fields (mm & nn) to that internal table now.
how can i do that.
and i wanna know the websites names where i can find some brain teasing questions in abap programming.
eagerly waiting for ur reply
regards,
Maqsood A Khan

Hi, MAQSOOD.
You can insert more fields in your internal table like this.
refer this code snippet.
DATA : BEGIN OF tbl_itab OCCURS 0.
        INCLUDE STRUCTURE zsdtc009.
DATA : vkorg   LIKE vbak-vkorg, "inserted one
        vtweg   LIKE vbak-vtweg, "inserted one
        vkbur   LIKE vbak-vkbur, "inserted one
        vkgrp   LIKE vbak-vkgrp, "inserted one
       END OF tbl_itab.
you can also read the book "Teach yourself abap in 21 days"
at http://cma.zdnet.com/book/abap/
but that book is just about basic concept of abap and report program.
it doesn't give a lecture for on-line program.
you can get pdf version books(about abap, sap...things) from sap.
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
I wish I could help you.
Regards
Kyung Woo.

Are field symbols and Dynamic internal tables consistant?

Hi,
Are field symbols and Dynamic internal tables
always consistent?
In my program I m creating a dynamic itab and assignig values to it using <FS>, sometimes the program fails to execute assign <Fs> statement...
this happens once in 3 to 4 runs
any solution...
I have proper clear and refresh statements in program.
Thanks,
Hardik

Anurag,
Thanks for a quick reply. Here I am sending a small piece of my code.
MOVE-CORRESPONDING OUTTAB TO DYNTAB.
 CLEAR IT_UDATE.
 CLEAR : T_KBETR .
 READ TABLE IT_UDATE WITH KEY UDATE = OUTTAB-UDATE.
 CONCATENATE 'DYNTAB-KBETR' IT_UDATE-CO_POS INTO T_KBETR.
 ASSIGN (T_KBETR) TO <FS> .
 SUBRC5 = SY-SUBRC .
 IF SUBRC5 = 0 .
 <FS> = OUTTAB-KBETR .
 ENDIF .
read statement will always return CO_POS .
while debuging this code a few times
ASSIGN (T_KBETR) TO <FS> .
returns sy-subrc = 4
and that was leading the program to short dump earlier.
now, as I have a check DYNTAB-KBETR holds no value on display.
this happens very few times. (most of the times report is displaying desired output)
Thanks,
Hardik

Field description of an internal table

Hi,
I am trying to read the field description of an internal table, which consists of fields from different DD tables. I am able to read the descriptions of a DD table by using FM 'DDIF_FIELDINFO_GET'.
Can you please suggest me how can read the text descriptions of an internal table fields in a Language other than English.
Thanks
Lokman

Here is my code. I am trying to use imternal table instead of DD table. If I use internal table I get short dump. The language is OK withh DD table.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 TABNAME = 'ZFISB_TRANSFERS'
 TABNAME = trsf_sel_tab
 LANGU = SY-LANGU
 TABLES
 DFIES_TAB = trsf_field_tab.
*delete trsf_field_tab where fieldname <> 'NR' OR FIELDNAME <> 'TDATE'
*OR
FIELDNAME <> 'FYEAR'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'NR'
 value_org = 'S'
 callback_program = 'ZFI_SCHOOL_BANKING_APP'
 callback_form = 'TRANSFERS_F4CALLBACK'
 TABLES
 field_tab = trsf_field_tab
 value_tab = trsf_sel_tab
 return_tab = return_tab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.

Reg: field names of an Internal table

Hi all,
I'd like to display all the field names of the internal table or a structure.
I want it very urgent.
Use ful answers will be awarded greatly.
Thanks in advance.
Jagan Mohan.

Hi Jagan,
Use the below code.
TYPE-POOLS: SYDES.
DATA: TD TYPE SYDES_DESC.
DATA: BEGIN OF WA OCCURS 0,
       CONTINUE     TYPE C,
       NAME(15)     TYPE C,
      END OF WA.
TYPES:BEGIN OF STR1,
        NUM(3) TYPE N,
        NAME(20) TYPE C,
      END OF STR1.
*DATA: ITAB LIKE T247 OCCURS 0 WITH HEADER LINE.
*DATA: ITAB TYPE STR1 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF ITAB OCCURS 0,
       NUM(3) TYPE N,
       NAME(20) TYPE C,
      END OF ITAB.
DESCRIBE FIELD ITAB INTO TD.
WA[] = TD-NAMES[].
LOOP AT WA.
IF WA-NAME = SY-REPID.
    DELETE WA.
    CONTINUE.
ENDIF.
SEARCH WA-NAME FOR '-'.
IF SY-SUBRC = 0.
    DELETE WA.
    CONTINUE.
ENDIF.
SEARCH WA-NAME FOR '='.
IF SY-SUBRC = 0.
    DELETE WA.
    CONTINUE.
ENDIF.
ENDLOOP.
LOOP AT WA.
WRITE: / WA-NAME.
ENDLOOP.

Getting field names of an internal table

Hi all,
Does anyone know if exists a statement, function module or method that gets the field names of an internal table ?
Thanks in advance,
David

Hi,
See this
REPORT typedescr_test.
TYPES:
BEGIN OF my_struct,
comp_a type i,
comp_b type f,
END OF my_struct.
DATA:
my_data TYPE my_struct,
descr_ref TYPE ref to cl_abap_structdescr.
FIELD-SYMBOLS:
<comp_wa> TYPE abap_compdescr.
START-OF-SELECTION.
descr_ref ?= cl_abap_typedescr=>describe_by_data( my_data ).
WRITE: / 'Typename :', descr_ref->absolute_name.
WRITE: / 'Kind :', descr_ref->type_kind.
WRITE: / 'Length :', descr_ref->length.
WRITE: / 'Decimals :', descr_ref->decimals.
WRITE: / 'Struct Kind :', descr_ref->struct_kind.
WRITE: / 'Components'.
WRITE: / 'Name Kind Length Decimals'.
LOOP AT descr_ref->components ASSIGNING <comp_wa>.
WRITE: / <comp_wa>-name, <comp_wa>-type_kind,
<comp_wa>-length, <comp_wa>-decimals.
ENDLOOP.

Data from field symbol into an internal table or workarea

Hi Experts,
I have field symbol in which i get the data. I want to get this data into an internal table of type any or into an work area. How is this possible.
My declaration for field symbol is as follow:
FIELD-SYMBOLS: <l_t_data> TYPE any.
DATA l_r_data TYPE REF TO data.
 CREATE DATA l_r_data type STANDARD TABLE OF (l_local_tab).
 ASSIGN l_r_data->* TO <l_t_data>.
I get the data in this field symbol <l_t_data>. by passing into a funtion module. and I get the data into it. Now i have to assign the values of this field symbol to any internal table or to a work are how do i do it. Please help.
Regards,
Prashant.

Not exactly sure what you need here, but.....
FIELD-SYMBOLS: <l_t_data> TYPE TABLE. "<<-- Change this
FIELD-SYMBOLS: <l_s_data> TYPE ANY. "<<---Add This
DATA l_r_data TYPE REF TO data.
CREATE DATA l_r_data type STANDARD TABLE OF (l_local_tab).
ASSIGN l_r_data->* TO <l_t_data>.
Loop at <l_t_data> assigning <l_s_data>.
* Do what ever using <l_s_data>
Endloop.
Regards,
Rich Heilman
Edited by: Rich Heilman on Feb 28, 2008 2:42 PM

Diff Between Internal Table with Occurs 0 & Field Groups

Hi,
Is there really any difference between just using an internal table with an OCCURS 0 statement-- which would write the entire table to paging space-- and using field-groups? How is Field-Groups is more effective than Internal tables with occurs 0 when it comes to performance?
Could anybody please give some information regarding above question?
Thanks,
Mohan.

hi,
occurs 0 means it wont create any extra memory. based on the records only the memory is allocated to internal tables at run time. but when an internal table is created it can hold data of type to which it is declared.
i.e data: itab like mara occurs 0 with header line.
can take data only from mara table
we can also do in another way as using types keyword we can declare a standard structure and create a internal table of that type. its also not that useful as we have to change the structure depending on changes for storing data.
for this purpose field symbols are used. field symbols can hold any data means that they can point to tables, fields, any standard or user-defined types. field symbols actually points to respective types by which we can directly access to that types using field symbols.
filed symbols works more faster than internal tables.
if helpful reward some points.
with regards,
Suresh.A

Differences between Internal table with Occurs 0 and Field-Groups?

Is there really any difference between just using an internal table with an OCCURS 0 statement-- which would write the entire table to paging space-- and using field-groups? How is Field-Groups is more effective than Internal tables with occurs 0 when it comes to performance?
Could anybody please give some information regarding above question?
Thanks,
Surya.

hi,
occurs 0 means it wont create any extra memory. based on the records only the memory is allocated to internal tables at run time. but when an internal table is created it can hold data of type to which it is declared.
i.e data: itab like mara occurs 0 with header line.
can take data only from mara table
we can also do in another way as using types keyword we can declare a standard structure and create a internal table of that type. its also not that useful as we have to change the structure depending on changes for storing data.
for this purpose field symbols are used. field symbols can hold any data means that they can point to tables, fields, any standard or user-defined types. field symbols actually points to respective types by which we can directly access to that types using field symbols.
filed symbols works more faster than internal tables.
if helpful reward some points.
with regards,
Suresh.A

How to Copy data from field symbol to Dynamic Internal Table

Hi,
I want to copy the data between two dynamic Internal tables . Following is the code were I have data in the field symbol wanted to transfer it to the other Internal table :
REPORT ztest.
DATA:
 gd_dref TYPE REF TO data,
 gd_dref1 TYPE REF TO data.
FIELD-SYMBOLS: <fs1> TYPE any,
 <fs_wa> TYPE any,
 <field> TYPE any,
 <fs_wa1> TYPE ANY TABLE. * Contains data from p_src
*Copy data from p_src to p_dest*
PARAMETERS: p_src LIKE dd02l-tabname . * Name of Dynamic Internal table *
 p_dest LIKE dd02l-tabname . * Name of Dynamic Internal table*
*DATA : lt_csks LIKE p_dest WITH HEADER LINE.
START-OF-SELECTION.
CREATE DATA gd_dref TYPE (p_src).
CREATE DATA gd_dref1 TYPE TABLE OF (p_src).
 ASSIGN gd_dref->* TO <fs_wa>.
 ASSIGN gd_dref1->* TO <fs_wa1>.
 SELECT * FROM (p_src) INTO TABLE <fs_wa1>.
*Write out data from FIELD SYMBOLS TO Table.
 loop at <fs_wa1> into <fs_wa>.
 do.
 assign component sy-index
 of structure <fs_wa> to <field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <field>.
 else.
 write: / <field>.
 endif.
 enddo.
 endloop.
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
*p_dest is a table having a similar structure to table p_src .
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
EXIT.
Thanks in Advance.

try this...
I have extended your source code and just used vbak/vbap as an example as they have some common fields like vbeln/erdat etc which corresponds with your requirement of 'similar structure' i.e. shared/common fields in both.
Cheers...
report ztest.
data:
gd_dref type ref to data,
gd_dref1 type ref to data,
gd_dref_str type ref to data,
gd_dref_tab type ref to data.
field-symbols:
<fs1> type any,
<fs_wa> type any,
<fs1_dest_str> type any,
<fs_dest_tab> type any table,
<field> type any,
<fs_wa1> type any table.
* contains data from p_src
*Copy data from p_src to p_dest*
parameters: p_src like dd02l-tabname default 'vbak',
* name of dynamic internal table *
 p_dest like dd02l-tabname default 'vbap'.
* name of dynamic internal table*
*data : lt_csks like p_dest with header line.
start-of-selection.
create data gd_dref type (p_src).
create data gd_dref1 type table of (p_src).
assign gd_dref->* to <fs_wa>.
assign gd_dref1->* to <fs_wa1>.
select * from (p_src) into corresponding fields of table <fs_wa1>
up to 3 rows
where vbeln ne space.
create data gd_dref_str type (p_dest).
create data gd_dref_tab type standard table of (p_dest).
assign gd_dref_str->* to <fs1_dest_str>.
assign gd_dref_tab->* to <fs_dest_tab>.
*write out data from field symbols to table.
loop at <fs_wa1> into <fs_wa>.
 " break-point here - can see vbeln/waers/create date/ etc move over to new structure
 " the 'common' fields of your structures - the same will happen. if they not the same name you will have to do an
 " explicit move i.e. if fieldname = xyz ....move fieldxyz to new field123....after the move-corre
 break-point.
 move-corresponding <fs_wa> to <fs1_dest_str>.
 insert <fs1_dest_str> into table <fs_dest_tab>.
** do.
** assign component sy-index
** of structure <fs_wa> to <field>.
** if sy-subrc <> 0.
** exit.
** endif.
** if sy-index = 1.
** write:/ <field>.
** else.
** write: / <field>.
** endif.
** enddo.
endloop.
" write out some dest data from the dest table build from previous loop
loop at <fs_dest_tab> assigning <fs1_dest_str>.
 do.
 assign component sy-index of structure <fs_wa> to <field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <field>.
 else.
 write: / <field>.
 endif.
 enddo.
endloop.

Field catalog required between internal table

Similar Messages

Maybe you are looking for