Field details of available balance in J2IUN

dear all,
In  J2IUN utilization transaction the column of available balaces are from either RG23 BALANCE and PLA.
but can anybody reply how and from which tables the values are picked and calculated for the available balance field.
Regards,
Vimlesh

.

Similar Messages

  • Table updation for J2IUN available balance

    Hi Experts !!
      I have my "available balance" in J2IUN is wrong. So I want to correct this balance through table level. Please let me know the procedure & table names for updating this balance.
    Thanks & Regards,
           Aruna.

    Hi,
    Please check table  BSIS and J_1ISERUTZ.
    BR

  • Available balance showing as 0,00 under utililzation for BED IN J2IUN

    Hi SAP GURUS
    While doing monthly utilization in J2IUN. Duty amount is showing 1200 under duties, but available balance is showing as zero under utilization for BED. But in the Gl Account balance is available.
    where to rectify to get available balance in monthly utilization
    Thanks in advance
    KISHORE

    SOLVED

  • Available balance showing zero balance under utililzation for BED IN J2IUN

    HI EXPERTS,
    While doing monthly utilization in  J2IUN  Duty amount is showing 1200  under duties, but available balance is showing  as zero under utilization for BED. But in the GL + balance is available.
    Pelase help me out
    Thanks in advance
    KISHORE

    HI EXPERTS,
    While doing monthly utilization in J2IUN Duty amount is showing 1200 under duties, but available balance is showing as zero under utilization for BED. But in the GL + balance is available.
    where to rectify to get available balance
    Thanks in advance
    KISHORE

  • Available balance in excise register

    Hi All
    I have captured and posted excise at the time of MIGO and Biling document.My PartII register is also showing entries against MIGO captured excise duty.
    I have posted FI JV for fund transfer to PLA on hold and then from J1iH transfered the same to PLA account as well.
    Now when I do monthly utilization J2iun, it is showing zero available balance against RG23A and RG23C and no PLA is showing here for utilization. And only billing invoices are coming for adjustment.
    Can someone suggest what is wrong here.
    Regards
    Mukta

    Hi Kishore
    GL account assignment exist for UTLZ for all the below RG23A and RG23C .
    RG23A BED               
    GL A/c for RG23A BED          
    RG23A SED          
    RG23C BED          
    RG23C AED          
    RG23C SED          
    Offset          
    Mod.Clear          
    GL A/c for PLA BED          
    GL A/c for PLA AED          
    GL A/c for PLA SED          
    GL A/c for PLA CESS          
    CENVAT OH          
    CENVAT sse          
    PLA On Hld          
    Reversal     
    GL account assignment not maintained for the below--
    G/L RG23AN     
    G/L RG23CN     
    G/L PLANCC     
    G/L RG23AE
    G/L RG23CE
    G/L PLAECS
    G/L 23AAT1
    G/L 23CAT1
    GL A/c for PLA AT1
    RG23AT2
    RG23CAT2
    G/L Acc for PLA AT2
    RG23AAT3
    RG23CAT3
    G/L Acc for PLA AT3
    Will this impact monthly utilization, or this is only for fortnightly utilization and any separate settings for monthly utilization?
    Also we have already extracted PLA after doing j1ih and the balance is coming in PLA Register when we see in J2i6.
    Regards
    Mukta

  • Accounts Receivable:  Detail Aged Trial Balance

    Good Morning-
    Is there a detailed aged trial balance available in SAP or does it have to be customized.  I have reviewed all the available reports and none of them look like an aged trial balance.
    Please help.

    Your abaper maybe able to help you. We had one created by our abaper called 'Open Item Aged Receivable Summary'.
    Elias

  • Negative Balance in J2IUn - Monthly utilization

    Dear SDNs,
    I am running Transaction J2IUn for April 2009 (Monthly Utilization).
    I am getting Three Account Names
    1. RG23ABED
    2. RG23CBED
    3. PLABED
    Here I am getting Negative value in Available Balance and Rem Balance for RG23ABED and PLABED.
    Any inputs..?
    Thanks in Advance...
    Regards,
    HP

    Hi,
    Check from MM end, whether the amounts are updated while excise capture and post is done.
    Regards,
    Sai

  • Updation of excise balances at j2iun

    Hi ,
    I understand , j2iun pick Payable and Available Balances from GLs (Comulative balance) of the Period entered.
    When we post j2iun , the GL balances gets reduced by respective amount and creates a PART - 2 entry.
    My question is . does J2iun also update any CIN table ( except part2) for last available balances ?
    Regards
    Shrey

    Hi
    Yes It updates J_2IACCBAL (Opening/Closing a/c balance table) & J_2IVACCBAL (View for register Balances)
    Cheers!!!
    Vineet Baweja

  • Projected available balance from Horizontal plan ASCP

    Which table and column stores the projected available balance details of ASCP horizontal plan
    Details:
    I can see the PAB (projected available balance) for a item in Horizontal plan in ASCP. which table and column stores this data.

    Hi
    Are you asking about start date (for each bucket ?) . Tools work dates>period start dates will give you that.
    If its for the whole HP it will be system date-1 always.
    Can you please elaborate on you qn ?
    Best Regards
    Partha

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • Appended field is not available in BI

    Hi Gurus,
    I have appended a field in the datasource, removed a hidden tick so that it will be available in BI system but after replication of datasource I still could  not get this field in transfer structure. When I was checking I found that in display datasource window under "Fields" tab for that particular field "Transfer" column is uncheck, due to which the field is not available.
    Now my concern is that how should I make this available in BI.
    any Help will be heavily appreciated.
    Thanks,
    Saurabh.

    Hi,
    I am on BI 3.5 system.
    and I didn't mean that my datasource is not in ROOSFIELD table, it is there but what you are saying is not applicable in my case. in ROOSFIELD, for the appended field  the OLPTSrc version is "A" and Field Attribute is "P" which is what the ABAP program stated above will do and I was very well aware of the program.
    My, ROOSFIELD output is,
    2LIS_XX_XXX                      A               ZZXXXX                      P
    This field was not hidden earlier as well, i could get this field for selection in RSA3 and even in infopackage also.
    But, the only concern is what I posted in my 1st question.
    How will I get that checkbox ticked?
    Thanks,
    Saurabh

  • New GL - Field that do the balance "profit center"

    Hi people,
    We are doing the post by upload file.
    40 - Bank account
    31 - Vendor
    And the system shows us: Field that do the balance "profit center" is not fulled in the item 001
    The account bank is correct to have profit center, but the estrange thing is that the system is taking of the information (delete)  the profit center we put.
    Do you know what we can do?
    Thanks,
    Rosana.

    Hi,
    For the cost center, check whether the cost center master data is having the profit center and at entry level profit center is not hedden field.
    For vendor, if you have the profit center in bank line item it should come in other line item. check whether inherittence is ticked in the below mentioned config-
    Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Activate Document Splitting
    Regards
    Milind Sonalkar

  • Query regarding the fields details in particular form for all the users in

    Dear All,
                  I have one query regarding the fields details in particular form for all the users in company.
    Let take an exapmle if i had created Purchase Order having fields in content tab as 1.Item No. 2.Quantity 3.Unit Proce   4.Total   5. Location.
    While Login in User manager i set these fields only for Purchase order , but when i login from other user and open the similar purchase order the defaults fields are also seen including  above 4 fieds .
    Now my question is how to set the User choice fiels for the particular form that are common to all users.
    Means whenever i login in any user and opens the same document the same fields should be seen....Thanksssss.........

    You have to login with each and every user and do the Form Settings of every forms, so that all the forms look same for all the users.
    This is a manual job and you have do do it with every user login.
    Alternately, you can try out this link that explains
    [How to Copy One Screen Layout to Another User|http://www.sbonotes.com/2008/03/how-to-copy-one-screen-layout-to.html]

  • Change the field details in MDM Console

    Hi All
    I have unloaded repository and try to change the fields details ,like changing the display fields option as yes or no. in MDM Console .
    But it is not allowing me to do so and giving error message as "field name already exists"
    But when I go and change the user defined field  it allows me to do so.
    Same is the case with Table details
    Can you guide me on this.
    Thanks
    Suds

    Hi Suds,
    If you are using the same and the latest MDM patch for both your original and the Test repository, it should behave in same way.
    But you mentioned that for test repository, you are not facing any problem.
    Try out these steps to debug your original repository:
    1. Check your original repository for any errors and also if found any, then repair it.
    2. Also try to archive your original repository and then unarchive it with a different name. ( And check whether it is still behaving the same).
    3. You can also try creating a duplicate repository and test it.
    4. Unload and Re-load (with updated Indices) your original rep and test it.
    I hope any of the above steps helps.
    *Please reward points if found useful.
    Thanks and Regards
    Nitin jain

  • My available balance is no longer visible...

    Normally the available balance is available in the top right hand of the screen, however this has now disappeared and whenever I try to download anything it says it will charge my credit card.  I know I have in excess of $160 in credit and I have checked my purchase history and everything checks out there fine.  Has anyone had the same problem?  All updates for Mac and Itunes are upto date.
    Cheers,
    Deborah

    Simply sign out of your account and log back in. That should refresh the account. But like what Carolyn said, you need to make sure you're using the same account where your credits are.
    The message that says you will be charged on your CC means the system detected you no longer have credits. It's possible you're logged in on a different account.

Maybe you are looking for

  • ITunes on one computer is not accessible on another computer, but the reverse is true -- help, troubleshoot

    My 2009 iMac can connect to my 2013 iMac, but not the reverse. My 2009 can play anything from the 2013 iTunes, but not the reverse.  When this problem happened there was also a problem of the sound not working on the 2013 iMac. I went through all the

  • How do i set up a new mail address on my macbook pro

    I would like to have a new mailbox with an address that is the name of my small business.  How do I add an account?  I can see how to click on the "plus" sign in mail preferences, but I don't understand the details that are required. Thanks for any h

  • VIAssemblyException: Invalid LV Client

    I'm working on a proof of concept that involves communicating between a C# application and a LabView-generated .NET interop assembly.  I'm able to build the assembly dll and reference it in Visual Studio.  However, when I attempt to call the external

  • I need to make space on my ipad 2

    Can I delete pictures from Camera Roll and/or music from the music list just on the ipad and not at the same time deleting same from my iPhone 5 and computer.

  • Importing large margined PDF documents into LiveCycle

    I have a PDF document with very large margins (height approx A4 x1; width approx A4 x5).  When I go to import this PDF into LiveCycle to start making an eForm, only part of the PDF is displayed in the Design View tab.  The remainder of the document i