Field displayed as hyperlinks

Hi
I have a report which is based on opportunity object, certain columns like DUE DATE, SUBJECT, CREATED DATE are displayed as hyperlinks in BLUE color.I dont want the data in these columns to be displayed with hyperlinks.I want them to be displayed as normal text in black.How do I remove them ?
P.S - I have not provided action links too.
Thanks
Natraj

Hi Natraj,
If you select the column properties you have to set the Column Heading Interaction and Vale Interaction (at the Column Format Tab of the Column properties) at "No Interaction".
This should help.
Best regards, Tim

Similar Messages

  • Issue with length of delivery field displayed in LM06 on RF device

    Hello everyone,
    I have a challenging issue which I have posted on another forum as well, and was hoping that somebody on SDN may be familiar with this.  This issue is being reported by one of our warehouses.  SAP RF transaction LM06 is used extensively in this warehouse, and we use a 10 digit delivery number. The delivery field itself in SAP is 20 characters, and we have always displayed 10 on RF. The warehouse is telling me that about a week ago, the number of characters displayed on the RF device for the delivery field in LM06 changed from 10 to 9, and that a leading zero was being inserted when the barcoded delivery number was scanned. There have been no changes to the barcode on the picklist, and I am told there have been no changes to the printer that prints the pick list. A change was deployed a week ago that contained some unrelated configuration and a small code change in a user exit for transfer order creation. Neither of these is in any way related to LM06. Our basis team tells me that there have been no changes to the SAP console server, but I have no way to verify that myself as I am a WM functional consultant. Can anybody tell me if they have seen a problem like this before, or if the field display for a transaction like this is configurable in the SAP console server? The RF hardware being used is the Symbol PDT-8146. Unfortunately, I am 10,000 miles from the warehouse, which puts me at a bit of a disadvantage in trying to diagnose this.

    Thank you both for the good feedback.  I have also gotten some useful feedback from my posting on ittoolbox, and have forwarded all of the responses to a colleague who is located at the site where the warehouse is located.  I will provide feedback once my colleague has had a chance to investigate further based upon the suggestions that I have received.

  • Regarding Selection-Screen Field Display

    Hi All,
    I have issues with Selection-Screen field display.
    The Actual issue is i had declared a selection screen field as: <b>s_exgen FOR embk-exgen</b>.
    <b>EMBK-EXGEN</b> is actually <b>20</b> Char length field.
    But in output display it is being shown as <b>18</b> Char field though i can type in all <b>20</b> characters.
    But <b>display</b> restricted to <b>18</b> Characters only.
    Can anybody give me the solution for the same!
    Thanks in advance.
    Thanks & Regards,
    Prasad.

    Hi,
    You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
    select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
    ... VISIBLE LENGTH vlen
    Effect
    This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
    Variant 2
    SELECT-OPTIONS sel FOR (f).
    Additions as in variant 1.
    Effect
    In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection <b>screen is inherited from the reference field whose name is contained in field f at runtime.</b>
    Regards
    Appana

  • Single field display on external crt monitor

    I can't find the setting to display a paused frame as deinterlaced on my external monitor. (My client is put off by the 'shimmering' of the two field display when paused). Is there a setting that will change this?
    Many thanks

    You must apply the Deinterlace filter to the freeze frames: Filters > Video > Deinterlace.
    Hope it helps!
      Alberto

  • Payment terms field display at MIRO screen

    Hi,
    How can I make Payment terms field "Display" at MIRO screen??
    Regards,
    Sattuj

    Hi,
    The fields on MIRO are not configurable as with other transactions.
    You have no config control of these fields.
    You should not really block the field, because what happens if you ever need to change it (believe me this WILL happen).
    Steve B

  • Field displays AFRange_validate in PDF template

    I have created a pdf template, and added a few fields for calculation. I have set validation rules for the field, but when I run the report, the form field displays AFRange_validate as the default value, I have tried giving default value as 0, but no success. Anyone out there to help?

    Mike
    PDF templates do not support barcode fonts in the same way as RTF templates. I have to admit, not having tried it Im just thinkning out of the box. But you ought to be able to hightligh a field in the Adobe form and set the font to a barcode one on your client. The key will be to ensure that the PDF engine can access the font on the server. And thereby hangs a tale - does the PDF engine 'look' for fonts when processing a PDF template. I'll drop the dev team a mail to ask.
    Bounce the thread if Im not back to you by Mon
    Tim

  • Need to Increase OTL Field Display Size

    In OTL, I modified the user-customizable views PA_ONLINE_PROJECTS_V to display the Project Number in this concatenated format...
    (ProjNum) ProjDescription
    using...
    CREATE OR REPLACE FORCE VIEW apps.pa_online_projects_v (
         project_number,
         project_name,
         project_id,
         project_type,
         start_date,
         completion_date,
         carrying_out_organization_id,
         carrying_out_organization_name
    AS
    SELECT DISTINCT
         DECODE(project_number,SUBSTR(project_name,1,LENGTH(project_number)),project_name,SUBSTR('('||(project_number||') '||project_name),1,25)),
         project_name,
         project_id,
         project_type,
         start_date,
         completion_date,
         carrying_out_organization_id,
         (SELECT
              name
         FROM
              apps.hr_all_organization_units
         WHERE
              organization_id = carrying_out_organization_id)          carrying_out_organization_name
    FROM
         apps.pa_projects_expend_v;
    However, only the first 25 characters show up on the LOV and timecard. Other than that, it works perfectly across the system.
    Does anyone know how to increase this from 25 to, say, 48 char? Oracle provided a white paper on this, but it only shows how to make the field display wider--not increase the number of characters.

    Do you mean to say that LOV field is having width more than 25 chars but it still shows only 25 chars?
    Are you using a seeded projects layout or a modified one? If it is a modified one, what is the value of QUALIFIER ATTRIBUTE5 for that LOV component?
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to adjust fields display width?

    work in jdev 11.1.2.3.
    in the form VISUAL DESIGNER, all fields looks same length, and there is no width attributes to adjust. When it runs, some fields display too long.
    How to adjust fields display width during design?
    Thanks.

    Hi,
    You dont need to redo it again , unless you have changed properties after initial drag and drop.
    If you have changed , use the value #{bindings.yourAttribute.hints.displayWidth} for columns property.
    <af:inputText value="#{bindings.name.inputValue}"
    label="#{bindings.name.hints.label}"
    required="#{bindings.name.hints.mandatory}"
    *columns="#{bindings.name.hints.displayWidth}"*
    maximumLength="#{bindings.name.hints.precision}"
    shortDesc="#{bindings.name.hints.tooltip}" id="it38">
    <f:validator binding="#{bindings.name.validator}"/>
    </af:inputText>
    Thanks,
    Naresh

  • Custom infotype - issues with conversion class - making fields display only

    Hi,
    I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
    Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
    When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION  and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
    We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well.  Appreciate your help in this regard.
    Thanks,
    Kumar.

    Hi Venkata,
    Check this document.
    This explains about custom infotype creation.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
    regards,
    Brinda L

  • PO - GL Account Field - display only

    Hi,
    Please could you advise on the options for making G/L Account field display only in ME21n?
    I think there are probably a few ways of doing it which I am investigating, but would like your opinion and advice if possible.
    Thanks in advance.
    As always - points up for grabs!

    Hi,
    Hope you are doing cost center accouting with account assignment K while creating PO
    Then go to MM --> Purchasing --> Account assignment --> Maintain account assignment category _-> Select cost center K --> Change view account assignment details you can
    make G L account as mand or optional or display or hidden.
    Check this out please if it helps you.
    Best regards,
    Sridhar

  • Can I change the text fields displayed in iTunes cover view

    I have alot of music in my iTunes library that are from "various artist" cds.  when in cover flow view i want to see "song" & "artist" fields displayed not "album" & "album artist".  is there a way to change the fields that are displayed.  This is especially annoining when in full screen mode, i want to see the artist of the song that is playing, not the artist for the whole album.
    I have my iMac in a fairly promenent location so that anyone can see what is currently playing on the system that is almost always piping music throughout the house via several airport expresses.
    any tips?
    chris

    I'm not sure this will work, but I think the best chance is:
    Settings > General > Accessibility > Large Text

  • Single Record Form: fields display with the wrong width

    I'm laying out fields on a single record form and notice that the width of the fields displayed when I run the form is less than the width I specify on the "Edit Page Item" page. Here are 3 examples:
    field 1: Display as=text, Width=100, Maximum Width=100, ==> displayed width=76
    field 2: Display as=text, Width=50, Maximum Width=50, ==> displayed width=46
    field 3: Display as=textarea Width=100 Maximum Width=100 ==> displayed width=100
    Anyone know why this is happening? I'm trying to layout the form so that it has a pleasing look. It's hard to get the fields lined up when they don't display according to the widths specified.
    Edited by: Corvette Captain on Aug 9, 2012 3:21 PM

    Hi,
    >
    I'm laying out fields on a single record form and notice that the width of the fields displayed when I run the form is less than the width I specify on the "Edit Page Item" page. Here are 3 examples:
    field 1: Display as=text, Width=100, Maximum Width=100, ==> displayed width=76
    field 2: Display as=text, Width=50, Maximum Width=50, ==> displayed width=46
    field 3: Display as=textarea Width=100 Maximum Width=100 ==> displayed width=100
    Anyone know why this is happening? I'm trying to layout the form so that it has a pleasing look. It's hard to get the fields lined up when they don't display according to the widths specified.
    >
    Setting the Width of the Page Item sets the input elements "size" attribute. HTML rendering based on size attribute is not a precise as you need. You should use CSS for precision. See Compatibility Notes
    Cheers,

  • ML81N Make FM fields display only in account assignment

    Requirement is to make FM fields already derived from PO (derivation working correctly) display only or add an error message. Easy I thought just go to config for SES and click on Additional Fields display only (Cost Center?, WBS element? there was no funds management fields available)...then after some time investigating
    Have debugged the transaction and found some possibilities.
    (1) BADI TR_GET_ACCNT_ASSIGN called in function FM_ACCOUNT_GET_COBL from MS_ACCOUNT_ASSIGNMENT.
    (2) User Exit EXIT_SAPLFMCH_001 called in function FM_CHANGE_AA_SUBST
    (3) Use FMDERIVE to somehow check the PO derivation
    Just wondered if anyone had taken this further before I spend a lot more time understanding the whole process in order to achieve a small bit. Please I am a technical resource not FM specialist.
    If I could understand the process flow, at least it might help me make quickest simplest solution.
    thanks,

    Hi,
    You can customize the field status in tx OME9 for the relevant account assignment category.
    But be aware that this customizing will be valid for all purchasing documents and transactions - not only for ML81N and the services area.         
    During SES postings, inheriting the FM account assignment from the reference PO is the standard and expected behaviour, so you may see that FMDERIVE is not called when the PO reduction is to be posted during ML81N. Instead, the FMAA is read from table FMIOI and fmderive is skipped in those lines (fi transaction keys KBS/WRX, for instance).
    I hope this will help you
    Kind regards
    Mar

  • Changing the Event View Field Display Order on a Calendar

    We'd like to change the display of a calendar event to show the Title on top and the time below. This is how it currently looks below. Is there a way to change it?
    Orange County District Attorney

    Hi,
    According to your post, my understanding is that you wanted to change the Event View Field display order on a Calendar.
    You need to insert the code below into a Content Editor Web Part.
    <script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript">
    function changeCalendarOrder() {
    $(".ms-acal-sdiv").each(function () {
    var arr = $(this).find('div').toArray();
    var temp;
    temp = arr[0];
    arr[0] = arr[2];
    arr[2] = temp;
    $(this).html(arr);
    //alert($(this).html());
    _spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
    // hook into the existing SharePoint calendar load function
    function calendarEventLinkIntercept() {
    var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4b;
    SP.UI.ApplicationPages.CalendarNotify.$4b = function () {
    OldCalendarNotify4a();
    changeCalendarOrder();
    </script>
    The result is as below:
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Numeric Field Display

    I think I've run into a bug with Designer. Can anyone confirm this? Or have I overlooked something?
    Situation:
    I have 5 numeric fields* in my form that use simple FormCalc calculations. All of them have the Object Field Display Pattern set as $z,zz9.99.
    All calculations work perfectly. However, when I was testing the form I discovered something quite odd. The display is perfect until the dollar amount exceeds $9,999.99. Once over this amount the format disappears leaving just the correct result (e.g. What should be $12,345.67 is displaying as 1234567.). I tried editing the display pattern to $zzz,zzz,zz9.99 but this did not work.
    Is there a JavaScript that will give me the formatting and calculations I need? Or do I need switch something else on in Designer? Thanks.
    * Calculations used:
    1) sum(BlackInkCost, ColourInkCost)
    2) sum(WhitePaperCost, ColourPaperCost, CardStockCost, TabCost, TransparencyCost)
    3) sum(CerloxCost, SpiralCost)
    4) sum(ImpressionsSubTotal, PaperSubTotal, BinderySubTotal)
    5) (CostSubtotal * NoDocumentsReqd)

    This would be the expected behaviour in the case of data entered into fields which do not match the pattern. This is not a bug, since you applied a pattern to display a certain number of characters and you entered something different, the pattern will fail and the form processor will leave the display as it is.
    As for increasing the number of characters in the pattern, it should work. Make sure you dont have a conflict between the edit, display and binding patterns. If they are different, you may get unexpected results.
    Also, if you do have a small pattern and can enter large numbers, then you should really apply some script to make sure your value is within legal limits. The rawValue of the field will always give you the pre-display pattern value.

Maybe you are looking for