Field Exit is not working in QA but working in Development Server....

Hi friends,
                     I have created Field Exit for data element EPOS_LGORT (Storage Location) .Which is using in ME21N transaction of MM. This Field Exit is proper
working in Development Server but after transport in QA it is not working. I have checked code , it is same as well as exist in development Server.
              Abap/fieldexit parameter already has been set as Yes. But still it is not working.
Following values has been set for Parameter abap/fieldexit for QA .
Dflt value                no
ProfileVal               YES
Current value          YES
SAP Release         4.71
                     Any other setting required for parameter's . Please suggest me.
Thanks.

Hi Chandrasekhar,
                       Thanks . Default value of parameter abap/fieldexit is 'yes or no' . Basis person told me that abap/fieldexit either can be set yes or no , so where we have to set 'X' value for abap/fieldexit parameter.
After execution of Program RSPARAM , following values found for QA Server.
1.1 R/3 C kernel               no
2.1 file                             no
3.1 file                             YES
3.2 program parameters    YES
3.3 Replace $$ and $(..)    YES
3.4 Generate file name      YES
4.4 Value in SharedMemory      YES
      Any other setting's we needed ?

Similar Messages

Field Exit is not working in ecc6.0

hi all,
i have upgraded my system from 4.7 to ecc6.0, there was a field exit 'FIELD_EXIT_QLGO_VM04_A' in 4.7 for QA32, but problem is that it was working in 4.7 but not working in ECC6.0 while codes are the same. can anyone help me that what shud i do?
Regards saurabh.
Edited by: saurabh srivastava on Dec 6, 2008 11:45 AM
Edited by: saurabh srivastava on Dec 6, 2008 11:57 AM

Hi
U can ran the report to manage the field-exit (now I don't remember the name) by SE38 and check if your field-exit is still active and if it's active u can check the system parameter abap/fieldexit by trx RZ10: it has to be set to YES.
Anyway u should consider the field-exit are not supported by SAP from release 4.70.
Max

Field Exits are not working in ECC6

Hi Friends,
We upgraded our 4.6C system to ECC6 but after upgradation field exits are not working. What could be the reason.
We are using GUI version-7.1 and SP-10,Release-6.
Rewarded,
Steve

Hi there,
Try this link ... it could help you.
[http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm|http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm]
If not, give an example.
I did the same upgrade without problems.
Best regards.
Valter Oliveira.

Field exits is not working in the COPA

Dear All,
I had create the field exits for profit center and it is working well in all the screen except the COPA. My profit center field exits will automatically change the profit center value if user key in the valid profit center department in the profit center field.
However, it is not working in the COPA screen. Please kindly advise.
thank you very much

Thank u for your answer.
Yes, of course .. i�ve already apply the unique key validator for the entity.. so that custom error message is the error im trying to get in the application.
Other issue is when im trying to edit that error message: when im going to edit the message the previous error im entered is not there. Is it normal?

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.

What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter

I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
Any suggestions?

First, see this discussion. If the solution suggested there doesn't work for you, continue.
If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
Back up all data.
1. Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

The "new" hotmail no longer works with safari, but works with firefox. Hmm.

The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
(a) Hotmail directly
(b) Hotmail Home>Hotmail
(c) Sign up to Windows Hotmail
(d) Deletion of prescribed cookies, resetting, etc. - made no difference
Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
I certainly would appreciate any other suggested fixes.

Field exit is not working for a user

Hi,
We have implemented a field exit in ME12 to change the purchase info record short description. It is working fine for most of the users except for some users. I just wanted to know is there any way we can restrict the field exits based on Authorization
Did any one faced this kind of issues
Bhanu

Hi,
Reason could be that users are logged on different servers : check that profile parameter abap/fieldexit is set equally in all application servers.
If it's okay, then you'll find the reason only by tracing 2 users, one which is okay, the other not, doing exactly the same thing. To do that, use SE30 with a variant with "no aggregation", as Olga explains in her blog ([SDN blog: ABAP Runtime Analysis (SE30) - How to analyze ABAP program flow|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4847/17050 [original link is broken] [original link is broken] [original link is broken] ]). Then you compare the 2 traces to see from which point execution differs. You can use SAT transaction, available from 7.0, to compare 2 traces far more quickly.
BR
Sandra

Wireless not working in linux, but works fine in windows vista

Hello!
I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

Hi there,,,,,
I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
Please help me.....i have been trying to get this thing work for 3 weeks.
thanks.

Page is not working in serverside but working correctly in JDEV

Hi,
After deploying the page which is working propely in my local machine JDEV,
its not working same at server side. i bounced apache couple of time.
if any one faced similar issue, please share.
Thanks,
Mahesh

Pages are working fine in my loacl machine, but whn i compile pages (javacode) at server and running the pages from apps instance, pages are not working correctly. But whn I transfer the class file from local machine to server side page is working perfectly, what would be the reason.How to check the Java/JDK version
D:\>cd jdevbin
D:\jdevbin>cd bin
D:\jdevbin\bin>java -version
java version "1.3.1_01" -- Java Version on local machine
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
On server
[apeafin19@camoraapp10 ~]$ cd $ORACLE_HOME
[apeafin19@camoraapp10 8.0.6]$ pwd
/u01/oracle/eafin19ora/8.0.6
[apeafin19@camoraapp10 8.0.6]$ cd bin
[apeafin19@camoraapp10 bin]$ java -version
java version "1.4.2_12" -- Java Version on server machine
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
[apeafin19@camoraapp10 bin]$
You can see the difference of JDK installed on server and on our local machine which can be root cause of the issue
Thanks
--Anil

Flash player not loading on http but works on https

I have an issue where flash player shows "movie not loading" on http pages but works fine on https.
I am using windows 7 64 bit, ie9 64 bit, i have tried it with the latest firefox and chrome and i still get the same issue.
This started with flash player 10.3, the 10.2 version did not have this problem and all subsequent versions have the same issue. i am currently using the 11.2 version of flash.
Example: Any flash video on youtube with the address beginning with HTTP, the video screen is black and when you right click you get movie not loading and the correct version of the flash player. If you change the header over to HTTPS the video works fine. this wouldnt be much of a problem except when going to any other website that has flash as its main element but does not have an HTTPS version, you cannot use the page or its features.
I have uninstalled and reinstalled several times, done a clean install, deleted all files and updated every area of my computer but this issue remains. I have read the forums here and done any suggestions listed to no avail and noticed many people have this type of problem. This issue has now been going on for almost 6 months. Can anyone help?
I may have posted this in the wrong forum and I appologize. If so can you please move it to the correct location?

I don't claim to know the solution to your problem, but in your situation I would try either or both administrator install methods: 1) Right-click the downloaded install file, choose "Run as Administrator" and install the software as usual. 2) Try using a different Windows account that you are positively certain has full administrator rights or the actual Administrator login name, install with that account.
Also, make sure you empty the browser cache before retrying the http pages. What about other browser settings, like security or privacy settings? Any add-ons or antivirus browser helper objects?
Do you only use Internet Explorer, or is this issue the same in Firefox, Opera, Chrome and Safari?
Good luck, hope you get the error fixed.

Videos will not work in Firefox but work fine in windows explorer. why?

I tried to verify my plug-in's and all are enabled. I found where was suggested to remove and reinstall Firefox but that did not fix problem either. I tried to change viewer for videos but still no luck. Not certain why Quicktime doesn't work. Note, videos when browsing will not open but everything else works fine. Videos work fine with windows Explorer, but not Firefox.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Top Nav buttons not working after publish, but works in app. WHY?

I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
<www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
mini intel Mac OS X (10.4.9)

They all work for me, try clearing your browser cache or using another browser.

Field Exit is not working in QA but working in Development Server....

Similar Messages

Maybe you are looking for