Field Exit Not Getting Triggerd

Hi friends , i ve created filed exit for t-code MB31 for original batch check ,
the fiedl exit has been activated but it is not getting triggerd.
Please reply ,
Thanks and regards ,
Mahesh
Message was edited by:
Mahesh Mogare

Hi Thomas ,
Thanks for reply , i ve set the parameter abap/fieldexit is to YES in quality server ,
and activate my field exit , and it is getting triggerd in quality server , i trnsport the same request in production server , i ve also check the filed exit is in active mode in prodution server , but it is not getting triggered , is it necessary to set the parameter abap/fieldexit is to YES in production server .
Please Reply .
Regards,
Mahesh .

Similar Messages

How to know whether a field exit is getting triggered or not??

HI ,
We are upgrading a system from 4.6 to ECC, the problem is that, in earlier system field exit was getting triggered but its not getting triggered in ECC, the field exit is active in ECC but still its not getting triggered.
Field Exit is FIELD_EXIT_SAKNR.
Please provide some help
Regards
Karan Arya

Hi,
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Hope this helps you resolve your issue.
Regards,
Jayanth

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

PR Release Strategy tab processor field is not getting displayed

Hi Experts,
While creating Purchase Requisition, In the Release Strategy tab processor field is not getting displayed which should be showing the name of the user id which has been configured in the SPRO.
SPRO--> Rel Proc for PR > Rel Group> Rel Code--> Object type (US) and --> Agent (User id who has to approve the PR).
release strategy - Release code -work flow 1
That processer name is not displaying
Thanks
chandoo

This is the workflow forum.

Date and time fields are not getting updated in database

Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
          gw_vttkvb_new-mandt = sy-mandt.
          gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
          gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
          gw_vttkvb_new-daten = gi_ship_doc-daten.
          gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
          gw_vttkvb_new-uaten = gi_ship_doc-uaten.
          APPEND gw_vttkvb_new TO gi_vttkvb_new.
          CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
          EXPORTING
            i_tvtk                             = '
          I_DESTINATION                      =
          I_DEPARTURE                        =
          OPT_DIALOG                         = 'X'
        IMPORTING
          E_SERV_AGENT_FROM_DELIVERY         =
          E_ROUTE_FROM_DELIVERY              =
          E_LEG_DETERMINATION_DONE           =
          E_NUMBER_OF_CHANGED_LEGS           =
             TABLES
               c_xvttk                            = gi_xvttk
               c_yvttk                            = gi_yvttk
               c_xvttp                            = gi_xvttp
               c_yvttp                            = gi_yvttp
               c_xvtts                            = gi_xvtts
               c_yvtts                            = gi_yvtts
               c_xvtsp                            = gi_xvtsp
               c_yvtsp                            = gi_yvtsp
               c_xvbpa                            = gi_xvbpa
               c_yvbpa                            = gi_yvbpa
               c_xvbadr                           = gi_xvbadr
               c_yvbadr                           = gi_yvbadr
               i_xtrlk                            = gi_vtrlk
               i_xtrlp                            = gi_vtrlp
          I_DEPARTURE_SEQUENCE               =
          I_XVTFA                            =
          I_YVTFA                            =
             CHANGING
               c_xvttk_new                        = gi_vttkvb_new
            EXCEPTIONS
              invalid_change                     = 1
              route_insert_failed                = 2
              tdlnr_insert_failed                = 3
              status_planned_failed              = 4
              status_registrated_failed          = 5
              status_loading_start_failed        = 6
              status_loading_end_failed          = 7
              status_completion_failed           = 8
              status_shipment_start_failed       = 9
              status_shipment_end_failed         = 10
              OTHERS                             = 11.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ELSE.
             **** Save shipment created
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          =
              IMPORTING
                return        = gw_return.
          ENDIF.
Regards,
shilpa talluri .

Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt     = sy-mandt.
wa-z_var     = 'test'.
wa-projid      = 'test'.
wa-relid        = 'test'.
wa-srtf2       = 'test'.
wa-clustr      = 'test'.
wa-clustd     = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu

Assignment field is not getting populated in KSB1 for posting key 50

Hi All,
We are uploading entries thru excel in SAP.
For posting key 50 assignment field is not getting populated in KSB1.
But for posting key 40 it is getting populated correctly.
All setting (FSG, posting key details) are same for both the keys.
No substitution defined in SAP.
There is no issue for FBL3N for both the posting keys, only issue with KSB1.
Any idea what could be the reason for this?
Thank you.
Akash

KSB1 is CCtr report..
if it is revenue normally it will be treated as statistical posting in CCtr accounting- for the cost element when it is defined as revenue element.. - check Cost elements - whether it is Cost and cost reducing or revenue element--
possibility this can be one of the reason.
check and confirm

User defined fields does not get added into database

Hello Experts
                          User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggest

Hello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
            oForm = SBO_Application.Forms.Item("updopd")
            oForm.DataBrowser.BrowseBy = "txtpatid"
            'Adding combo in Obervation
            oItem = oForm.Items.Item("txtpatid")
            oEdit2 = oItem.Specific()
            oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
            oItem = oForm.Items.Item("txtmnane")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
            oItem = oForm.Items.Item("txtlname")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest

Currency Field is not getting populated in 0FI_AR_3 Data source

Hi Friends,
I have unchecked the currency fields DMBE2 , DMBE3 and curresponding currency type fields HWAE2
and HWAE3 in the data source 0FI_AR_3 and activated the DS.
when i am checkin the data using extract checker rsa3 , the fields DMBE2 and DMBE3 are filled with the amount but the corresponding currency types are not getting populated in HWAE2
and HWAE3 fields.the currency field are maintened in R/3 side.
Please suggest.
Thanks

I was checking this issue, and all the enhancements with fields need to
have a customer-exit to be populated.
If those fields are not delivered by SAP and are not in the original
datasource(RSA5) from Business content, this is related to an enhancement.
We can only see these fields in the datasource enhanced through RSA6.
To have the proper values assigned to those field, you should write an
User Exit program. This program must be created to fill the enhanced
fields as they are not filled in the same way as the SAP delivered
fields.More details about this process you can check note 576886.
576886-Change to user-defined fields not extracted.
This SAO Note is an example for some datasources regarding what should be
done.
Thanks,
Walter Oliveira.

AT USER COMMAND is not getting triggerd

Hi Techie's
I have two fields on the selection screen
1) Name:   ___________
2) Id:         ___________
I have some buttons say on the Application toolbar say::
Save            Delete            Modify           Exit
I have created these buttons in the INITIALIZATION event.
I am using AT Selection Screen OUTPUT for some logic purpose.
Later I am writing AT USER COMMAND and pressing SAVE The function code for SAVE is "SAV".
But the drama is that AT USER COMMAND is not getting triggered at all.
It goes first to Initialization--->At selection Screen OUTPUT>Then screen appears> I give the values and press the SAVE button--
again it goes to the At Selection screen OUTPUT.
Not even getting the hang of it. Please help if anybody know the story of it.
ITS SO URGENT.

At user command is for list processing, you need something like this:
Pushbuttons in the Application Toolbar
In the application toolbar of the standard GUI status of the selection screen, five pushbuttons are predefined with the function codes FC01 to FC05, but are inactive by default. You can activate them during the definition of the selection screen as follows:
SELECTION-SCREEN FUNCTION KEY i.
The numbering i must be between 1 and 5. The individual function texts must be assigned to the functxt_0i components of structure sscrfields before the selection screen is called. You must declare this structure as an interface work area using the TABLES statement.
If the user chooses one of these buttons, the runtime environment triggers the AT SELECTION-SCREEN event and the function code FC0i is placed into the component ucomm of the structure sscrfields.
After the AT SELECTION-SCREEN event has been processed, the system displays the selection screen again. The only way to exit the selection screen and carry on processing the program is to choose Execute (F8). Consequently, the pushbuttons on the application toolbar are more suitable for controlling dynamic modifications of the selection screen than for controlling the program flow.
REPORT demo_sel_screen_function_key.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
This defines a standard selection screen with two parameters. In the application toolbar, two pushbuttons are assigned the texts LH and UA and activated.
When the user clicks one of the buttons, the AT SELECTION-SCREEN event is triggered and there the input fields are preassigned correspondingly.

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

Time From field is not getting displayed in correct format in Activities

Hello Experts ,
We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
Can any one suggest how to display in correct format ?
Regards
Vinayak

Hi,
Its an SAP Product error.
Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
- Bobby

Adobe field values not getting displayed in UWL workitem

Hi,
We filled a ISR Adobe form and submitted it and generated the corresponding notification number.
On clickng the 'display and print form', the form is gettin displayed properly.
But on checking the form at the approvers UWL, the field values are not getting properly filled.
The form is getting properly displayed at R/3 through IQS22 and also the data values are properly attached to the notification number( checked through ISR_PROCESS_EVENT ).
Kindly help.
Thanks and Regards,
Anto.

Thanks for publishing your own solution!
Cheers,
Noë

Xpath field details not getting displayed

Hi all,
I am working on a idoc to file scenario, where I want to refer the receiver to be determined based upon certain condition or values that get populated for a particular field (using receiver determination). But the problem is that when I click on the condition tab on receiver determination I get a warning "Problem loading schema description"
with message as
"Message interface does not exist in any software components installed on this business system"
But since it is an Idoc at the source we dont have any msg interfaces, further if i neglect this warning message and go further, I am not getting the fields or details of the Idoc structure getting displayed in the xpath.
But the same when I use for a file scenario(file as sender) I get the details of the context object if any.. Let me know how to resolve this..
Thanks in advance
Regards,
Nithiyanandam

Hi,
Yes you coudl add the missing Software component as per below steps
Even if you open Business system in Integration Directory, at last tab "Other Attributes" --> you will find the list of software components.
Press the tab Third Party service to verify the list against SLD.
If its not avaialbel in SLD
1. Goto System Landscape Directory
2. select Business Landscape and slect the apporpriate Business system and open it. (Click the name of BS)
3. There you will get the list of Software components added in it.
4. Verify the technical system name.
5. Also verify if same technical system name is used after importing the software component in Integration Repository (IR).
Goto IR -- > Explore the SCV -->Double click on name of software component version -->Check Interface Import as Import of RFC and have the same details in Connection data as per technical system
If everything is setup just refresh the SLD_CACH and import the scenario once again in Integration Directoy and process it.
You will see the IDOC in Business system.
Thanks
Swarup
Edited by: Swarup Sawant on Feb 4, 2008 8:00 AM

Field value not getting updated in R/3

Hello Experts!!
I am facing a problem while updating a field value back in R/3.
The Syncbo is of type U01 and the field has data type char 40.
The meRepMeta.XML file has following description
Field name="DESCR1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="modify">false</Input>
1) when i test the function module in R/3. The field value is gets updated.
2) when i create a record for the sync BO from client , i can see the field value being created on the client.
3) when i synchronize, i dont get any error or warning and get a successful message.
S 15.07.2008 12:19:09 All updates for one TOP block were successful (seq. no.=65, TOP cntr.=0000000001)
15.07.2008 12:19:09 Synchronizer UPLOADER completed successfully (mobile ID=0000002646, SyncBO=ZDBMSERORD)
I am not able to locate where is the problem
Please suggest!!
Regards,
Priya Ghosh

Hi,
please check your maping in the create handler in MEREP_SBUILDER. Perhaps the value is created on the client but not mapped to the field of the function module. Furthermore have a look into MEREP_MON and see if the data gets forwarded in there.
At last I would dump the information received by the function module into a table without any logic. So you can see what data actually is forwarded into the funct module - if brake point i not possible.
Hope this helps.
Regards,
Oliver

SGTXT field is not getting populated in 315 document

While placing stock in storage location through MIGO (movement 315) with reference to movenet 313 document, TEXT (SGTXT) field which is entered in 313 document is not getting populated from referred document.

Hi,
This is Standard SAP functionality.The Text does not get automatically populated from the referred document. You will have to use enhancement for the same. Use BADI - MB_MIGO_ITEM_BAdI

Field Exit Not Getting Triggerd

Similar Messages

Maybe you are looking for