Field Exits are not working in ECC6

Hi Friends,
We upgraded our 4.6C system to ECC6 but after upgradation field exits are not working. What could be the reason.
We are using GUI version-7.1 and SP-10,Release-6.
Rewarded,
Steve

Hi there,
Try this link ... it could help you.
[http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm|http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm]
If not, give an example.
I did the same upgrade without problems.
Best regards.
Valter Oliveira.

Similar Messages

Field Exit is not working in ecc6.0

hi all,
i have upgraded my system from 4.7 to ecc6.0, there was a field exit 'FIELD_EXIT_QLGO_VM04_A' in 4.7 for QA32, but problem is that it was working in 4.7 but not working in ECC6.0 while codes are the same. can anyone help me that what shud i do?
Regards saurabh.
Edited by: saurabh srivastava on Dec 6, 2008 11:45 AM
Edited by: saurabh srivastava on Dec 6, 2008 11:57 AM

Hi
U can ran the report to manage the field-exit (now I don't remember the name) by SE38 and check if your field-exit is still active and if it's active u can check the system parameter abap/fieldexit by trx RZ10: it has to be set to YES.
Anyway u should consider the field-exit are not supported by SAP from release 4.70.
Max

Field Exit is not working in QA but working in Development Server....

Hi friends,
                     I have created Field Exit for data element EPOS_LGORT (Storage Location) .Which is using in ME21N transaction of MM. This Field Exit is proper
working in Development Server but after transport in QA it is not working. I have checked code , it is same as well as exist in development Server.
              Abap/fieldexit parameter already has been set as Yes. But still it is not working.
Following values has been set for Parameter abap/fieldexit for QA .
Dflt value                no
ProfileVal               YES
Current value          YES
SAP Release         4.71
                     Any other setting required for parameter's . Please suggest me.
Thanks.

Hi Chandrasekhar,
                       Thanks . Default value of parameter abap/fieldexit is 'yes or no' . Basis person told me that abap/fieldexit either can be set yes or no , so where we have to set 'X' value for abap/fieldexit parameter.
After execution of Program RSPARAM , following values found for QA Server.
1.1 R/3 C kernel               no
2.1 file                             no
3.1 file                             YES
3.2 program parameters    YES
3.3 Replace $$ and $(..)    YES
3.4 Generate file name      YES
4.4 Value in SharedMemory      YES
      Any other setting's we needed ?

Field exit is not working for a user

Hi,
We have implemented a field exit in ME12 to change the purchase info record short description. It is working fine for most of the users except for some users. I just wanted to know is there any way we can restrict the field exits based on Authorization
Did any one faced this kind of issues
Bhanu

Hi,
Reason could be that users are logged on different servers : check that profile parameter abap/fieldexit is set equally in all application servers.
If it's okay, then you'll find the reason only by tracing 2 users, one which is okay, the other not, doing exactly the same thing. To do that, use SE30 with a variant with "no aggregation", as Olga explains in her blog ([SDN blog: ABAP Runtime Analysis (SE30) - How to analyze ABAP program flow|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4847/17050 [original link is broken] [original link is broken] [original link is broken] ]). Then you compare the 2 traces to see from which point execution differs. You can use SAT transaction, available from 7.0, to compare 2 traces far more quickly.
BR
Sandra

Field exits is not working in the COPA

Dear All,
I had create the field exits for profit center and it is working well in all the screen except the COPA. My profit center field exits will automatically change the profit center value if user key in the valid profit center department in the profit center field.
However, it is not working in the COPA screen. Please kindly advise.
thank you very much

Thank u for your answer.
Yes, of course .. i�ve already apply the unique key validator for the entity.. so that custom error message is the error im trying to get in the application.
Other issue is when im trying to edit that error message: when im going to edit the message the previous error im entered is not there. Is it normal?

BW Field level Autorizations are not working in the WEBI Reports

Dear All,
1. I have created Authorization roles with Infoobjects Authorization Objects.
2. In Bex Query Authoizations are working on the Infoobjects like for
Ex: For USER1 I have given Company code = 1000 &
User 2 I have given authorization for 1100.....
3. Import those roles into Business Objects-CMC.
4.Users were Imported.
But in the WEBI Reports BW Field level Authorizations are not working i.e for USER1 authorization for Company code is 1000 , in WEBI report it is showing all the Company codes data for USER1.
For USER2 also showing all the data in the WEBI report.
Plz help me on this issue.
Thanks,
Kiran Manyam

Hi,
For Authorization to work in BO you can check the following:
1. You need to create authorization variables in your BEx query.
Also these variables should not be input ready.
2. While creating universe in BO you need to select "Single Sign On" option available in the parameters iwhile creating a new
connection.
Regards,
Rohit

Hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Cancel and Exit button not working

Dear Experts,
<u>Cancel and Exit button not working</u>
I am calling a screen from inside a report program
using SET SCREEN 9000.
2 of the date fields(start date end date)
on this screen are Mandatory.
I am not able to Come out of this screen 9000 using
CANCEL or EXIT button
without giving a date entry in both of
Mandatory fields (start date end date).
Can someone help me with a solution?
Appreciate your valuable help;
Points assured
Thanks,
Aby Jacob

Hi..
To avoid this problem you have to use AT EXIT-COMMAND Module.
1. In the GUI Status for both EXIT and CANCEL buttons assign the Function type E (Exit Command)
2. In the PAI of the Screen Call this module.
   MODULE EXIT_SCREEN AT EXIT COMMAND.
3. Now check the OK_CODE or Sy-ucomm in this module to Leave the Screen
   MODULE EXIT_SCREEN INPUT.
       CASE OK_CODE.
      WHEN 'EXIT' .
            LEAVE TO SCREEN 0.
      WHEN 'CANCEL'.
      ENDCASE.
   ENDMODULE.
This will surely work.
<b>reward if Helpful.</b>

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Formula Columns are not working in Reports 10g

Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M T

What version of Reports do you use..???
Greetings...

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Exit button not working in MS Explorer

Hi. The exit button in our Captivate courses are not working
all of a sudden. They work in FireFox but in MS IE. We are using
Capivate 2.0. IE version is 6.0.

Hi Apparo,
In onAction method of the Exit button, a call is made to the TargetExitApplication as follows:
fpm.navigate(wdThis
.wdGetFcNavigationInterface()
.getNavigationTargetExitApplication());
Also, the Exit button does work in the Address Overview/Edit/Review Page, but not in W-4 Tax and Benefits Enrollment.
Any help on this problem !!!
Regards,
Adren

ADF bindings are not working with inheritance heirarchy.

ADF bindings are not working with inheritance heirarchy. I am using embedded OC4J in JDeveloper 10.1.3.2.
For the data model I have the following objects\attributes.
1) User (abstract EJB 3.0 POJO)
- Id
- userId
- userName
2) Employee -> extends User (EJB 3.0 POJO)
- enabled
- password
3) Manager -> extends Employee (EJB 3.0 POJO)
- numOfEmployees
4) UserSessionBean (Stateless Session Bean)
- public User findUserByUserId(String userId)
- public List<User> queryUserFindAll()
- Object mergeEntity(Object entity)
I created 2 JSF pages using ADF.
1) ListUsers.jspx - Lists all the users of type Employee and Manager in a table. You can select an user and chose to modify the user details using a modify button.
2) ModifyUser.jspx - Modify the selected user and persist the modified user details.
I implemented ListUsers.jspx by dragging and dropping queryUserFindAll() method from the ADF datacontrol on to the JSF page and selected ADF Table format with selection enabled.
Similarly for the ModifyUser.jspx page I dragged and dropped the User object returned by findUserByUserId(String userId) and selected ADF Form format. I selected OutputText field types for userId and userName.
I then created a navigation case from ListUsers.jspx to ModifyUser.jspx and pass the selected user.
Now when I try to run the web application, ListUsers.jspx correctly displays all the users. Then I select a user of type Employee and click on the modify button. This brings up the ModifyUser.jspx page. However, the UserId text field displays the value for "Id" field rather than "userId".
Question that I have is:
- Why is ADF framework not able to retrieve the appropriate user attribute value for a Employee based on the binding information in case of inheritance ?
Thanks,
Piyush

Hi,
tried with JDeveloper 10.1.3.3 and this works for me. Try JDeveloper 10.1.3.3 - if it doesn't work, have a closer look at your sessionFacade
Frank

Field Exits are not working in ECC6

Similar Messages

Maybe you are looking for