Field FNAME displayed in german..

In standard report *RFKABL00* field *FNAME* sometimes display text in german and sometimes in english.
What Could be the reason?
John.
Edited by: JohnMell02 on Feb 9, 2010 2:52 PM
Edited by: JohnMell02 on Feb 9, 2010 3:01 PM

It seems that translation does not exist in german or english.
Check data types for fields in error.
Go to SE11 for the type, check translation EN --> DE or DE --> EN
If types in error are standard types --> check oss notes
If types in error are specifics types --> correct your translation using transaction SE63.

Similar Messages

  • LSMW display in German

    Hi All,
    We have just installed LSMW 1.8 on 4.6D.  It display German excepted login language is English.
    Any comment?
    Thanks
    Wilson

    Hi Aidan,
    Thanks for your reply.  It works for all menu, status and message excepted label.
    Like in screen 100,  there are three fields - Project, subproject and object.  These fields are displaying in German.
    Any further comment?
    Thanks
    Wilson

  • PR05 Trip data displayed in German

    Hi Experts
    When I try to create the the travel request through PR05, few fields are displayed in English and few in German Language.
    logon language is English.
    Please advice if there is any setting to be changed.
    regards,
    Sandhya

    This looks like a customizing or development problem to me, and not a security problem (though you might want to trace for S_TRANSLAT in ST01).
    Moved to ERP TM forum...
    Cheers,
    Julius

  • Regarding Selection Screen field making display field  in ALV report

    Hi All,
               In ALV Report,  at runtime how can i make the field as Display Field in selection screen .
    Thks & Regds
    Shailesh

    hii,
    Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
    1.demo_dynpro_modify_simple
    2.demo_dynpro_modify_screen
    if tou are using grid,u can refer to foll link
    sequencing / choosing fields in report screen at runtime,
    Display the Columns in the grid at run time
    rgrds,
    Shweta

  • Field doesnu0092t display in alv  , why  ?

    WHEN 'NETPR' .
          LS_FCAT-COLTEXT = TEXT-031 .
          LS_FCAT-COL_POS =  29.
          LS_FCAT-OUTPUTLEN = 15 .
        LS_FCAT-DATATYPE   = 'CURR' . "'QUAN'.
        LS_FCAT-rollname = 'NETPR'.
    when the report is display  , the field doesn't show up ?
    also if i reduce the number of Columns ( in the field catalog )
    for display there is no change
    all the other fields are display except the "NETPR"
    when i check the "layout change" he is there   ,
    also he is display if i reduce the number of columne for display ( by layout change)

    hi,
    see this.
    did u append the data to field catlog internal table also please check .
    fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15. 
      fieldcatalog-do_sum      = 'X'        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    Regards
    Anver

  • Custom fields not display in SRM5.5 Basic Data Frame

    Hello Everybody,
          I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
         No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
        I added these fields by help of 672960 OSS notes..
       Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
      Is there anything else do i need to display custom fields in basic data frame??
    I have one more question..
      When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
      I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
      To display all the fields which are display in GUI Mode also should display in URL..
      To bring this functionality , What do i need to do?
      I appreciate if you answer these questions..
    Thanks,
    John.

    Hi Disha,
    We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF".  We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
    Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
    Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
    I will be gald to provide any kind of info.
    Thanks in advance...

  • Industry sector field for display only.

    Dear All,
    Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
    I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
    Regards
    Rang

    Hello Ranganath,
    You can use transaction exit. for more information check this thread.
    Industry sector (MBRSH) field in display mode.
    Hope this helps.
    Regards
    Arif Mansuri

  • How to make 'Overall Limit' field as display only in ME22/ME22N

    Hi,
    I want to make the 'Overall Limit' field as display only in transation ME22/ME22N (only for Service Items).
    I can make the field display only for ALL Service Items by going to:
    SPRO u2013 IMG - Material Management - External Services Management - Define Screen Layout
    and making the 'Overall Limit' display only for PT1 (Blanket Items). But this also stops any entry into this field even for creation of Purchase Orders! When I try the same thing for ME22 (Change Purchase Order) it does not work.

    Hi
    You can make it greyed out like this:
    Go to materials management -> external service management -> define screen layout -> copy field selection key ME22 -> enter new key as ME22N -> choose category of field selection to 2 -> click on value limit -> make overall limit as display.
    Then for Tcode ME22N, this field will be greyed out.
    Thanks

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • G/L Account Long Text Field in Display

    Dear Sir,
    I want G/L Account long text field be displayed along with G/L account number in G/L Account line item display report (FBL3N)
    I cheched the layout, the option of G/L account number is available but option of G/L account Long text is not available.
    Kindly guide me as to how can I do it?
    Regards
    Chirag Shah

    You must do some development for it.
    You can add additional field to FBL*N reports with using BTE exit.
    First of all, if you don't use BTE before, you must create a product on FIBF.
    Call FIBF transaction -> Settings -> Products -> ...of a customer
    Create a new line,
    Product: ZFI
    Text: BTE Products for FI Exit
    Product active: tick checks from activation.
    Then you must call SE11 for structure RFPOS.
    You must use append structure function for this structure and you can define ZFI_RFPOS append structure
    Define 4 fields.
    Component: KUNNR - Component type: KUNNR
    Component: NAMED - Component type: NAME1
    Component: LIFNR - Component type: LINFR
    Component: NAMEK - Component type: NAME1
    Then save and active your RFPOS structure.
    After that, you must do same step for structure RFPOSX.
    Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
    After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very important;
    E_POSTAB = I_POSTAB.
    Then you should add some ABAP code for getting customer & vendor details.
    I give you some examples, you can use it. (Next message on this thread, please check)
    Then save and active FM.
    Call FIBF transaction again.
    FIBF -> Settings -> Process Modules -> ...of a customer
    Define a new line.
    Process: 00001650
    Function Module: ZFI_INTERFACE_00001650
    Product: ZFI
    and this customizing.
    Then you go to SE38 transaction.
    start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
    After those operations, you can see customer/vendor code and their names on FBL3N.
    ABAP source example,
    TABLES : bseg, kna1, lfa1.
    IF sy-tcode = 'FBL3N'.
      CLEAR: bseg.
      SELECT SINGLE *
      FROM bseg
      WHERE bukrs = i_postab-bukrs
           AND belnr = i_postab-belnr
           AND gjahr = i_postab-gjahr
           AND koart = 'K'.
      IF sy-subrc EQ 0.
        e_postab-lifnr = bseg-lifnr.
        CLEAR: lfa1.
        SELECT SINGLE *
        FROM lfa1
        WHERE lifnr = bseg-lifnr.
        IF sy-subrc EQ 0.
          e_postab-namek = lfa1-name1.
        ENDIF.
      ENDIF.
      CLEAR : bseg.
      SELECT SINGLE *
      FROM bseg
      WHERE bukrs = i_postab-bukrs
           AND belnr = i_postab-belnr
           AND gjahr = i_postab-gjahr
           AND koart = 'D'.
      IF sy-subrc EQ 0.
        e_postab-kunnr = bseg-kunnr.
        CLEAR: kna1.
        SELECT SINGLE *
        FROM kna1
        WHERE kunnr = bseg-kunnr.
        IF sy-subrc EQ 0.
          e_postab-named = kna1-name1.
        ENDIF.
      ENDIF.
    ENDIF.

  • Created By field shows display name.

    Hi,
    I have a SharePoint list and the created By Field exports as Display name when I export to excel. I would like to auto -populate a field in the SharePoint list that will auto populate the Field with display name of the field when an item is created.
    How can I make this possible?
    Thanks,
    techie

    hi
    you need to use JavaScript code for the same.
    <script src="/my/Style%20Library/jquery-1.11.2.js"></script><script language="javascript" src="/my/Style%20Library/jquery.SPServices-0.6.2.js" type="text/javascript"></script><script language="javascript"
    type="text/javascript"> </script> ​​​​ 
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
    var userName= $().SPServices.SPGetCurrentUser();
    $(".sp-peoplepicker-initialHelpText.ms-helperText").text("");
    $(".sp-peoplepicker-topLevel").val(userName);
     $(".sp-peoplepicker-topLevel").text(userName);
    </script>
    http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20799.aspx
    http://www.enjoysharepoint.com/Articles/Details/auto-populate-current-logged-in-user-name-in-sharepoint-2010-20992.aspx
    or set column deafault value as [Me]
    http://sharepoint.stackexchange.com/questions/118932/sharepoint-2013-auto-populate-person-column-in-list-with-creator-name
    Rajendra Singh
    Walking on water and developing software from a specification are easy if both are frozen
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Custom module pool + Amount field decimals display same as standard screen display

    Hi All,
    Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
    Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
    Both the data elements have 2 decimal places.
    For currency USD two decimal places are displayed - in TCURX - decimal places are two.
    For currency JPY or CLP - zero decimal places are displayed  - in TCURX - decimal places are zero.
    i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
    I would like to know how this is happening on standard screen fields.
    Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
    P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
    I would like to get a solution for this one.
    Thanks in advance.
    Goutham.

    Thank you all for taking time to take a look at this query.
    This issue has been resolved.
    Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
    For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
    When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
    In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
    Do repond to this thread if the resolution is not clear.
    Thank you all once again.
    Goutham.

  • Make field as display

    hi all,
    i want to make one field in display mode in mir7 how i can achieve this...plz help
    regards,
    umesh

    hi
    go to OB41
    here double click on key 31
    then click on field status
    here try to change field status
    regards
    KI

  • How to compare two currency form fields and display a message if the fields do not equal?

    My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I would greatly appreciate help in getting it started. Any ideas?
    Thanks, Charlie
    charlie6067

    Since the field values that you want to compare are the results of calculations, you should not normally compare their string values, but rather their numeric values when rounded appropriately (and perhaps then converted to a string). For example, if you have two values that display as 3.14, one could be 3.1400000001 and the other could be 3.13999999999991234. When you get the field values as strings and compare them, they won't be equal though they appear to be. Even some values that are numerically identical won't be equal when compared as strings ("0.0" != "0.00") So the code could be changed to:
    // Get the two field values, rounded to two decimals
    var v1 = util.printf("%.2f", getField("Total_1").value);
    var v2 = util.printf("%.2f", getField("Total_2").value);
    // Hide/Show the error message
    event.value = (v1 === v2 || (+v1 === 0 && +v2 === 0)) ? "" : "Error message here.";

  • User displayed in german need to be changed to enlish...help

    Hi All,
              i craeted a role and assigned a user to that role.when the user logged in the transaction menu list is displayed in german language which need to be chabged to english.i checked the language set to the user in su01(it is set english only)
    rgds,
    Anand

    Hello Anand,
    In the role you have created go to Menu tab and check if all the transactions displayed there are in German language if they are in german then in the change mode you can change the language to english using translate node button (in additional activities). Now check the user menu to whom this role is assigned, it should work. Anyway this helps if you have small list of transactions in menu. (Try se63 for translation of texts)
    Award points accordingly,
    Regards,
    Raju.

Maybe you are looking for