Field for counter and node in IA07 transaction

Hi,
In PLPO table when i give the task list type and group, I get multiple entries.How do we restrict the number of entries to the ones we need for our maintenance plan? Can it be done through counter and node? In that case where can we find them in IA07 transaction?
Thanks & Regards,
Jegashree

Hi experts,
Any suggestion on this?
Regards,
Jegashree

Similar Messages

  • Adding BKPF_XREF1_HD field for FBL3n and FBL1N dynamic selection

    Hi Friends,
    Is there any possible way to add the BKPD-XREF1_HD field to FBL1N and FBL3N transactions?
    As per my knowledge both are line item related process which contains other than BKPF table entries. Bue my client wants to add in the Dynamic selection as it available for FB03 transaction.
    I tried thru SE36 but no result. (BRF)
    Please adivse what are all the ways to do that or is there any SAP notes available for possible or not possible solution.
    Plaase reply.
    Thanks & Regards
    Sankar.

    Hello Sankar babu,
    These fields need to be setup as Special Fields in T021S. You can do this by the following path in IMG:
    Financial Accounting->General Ledger Accounting->G/L Accounts-> Line Items->Display Line Items with ALV->Define Special Fields for Finding and Sorting Data. (transaction OBVU).
    Please check SAP note 207436. It describes you how you should act to see the field XREF* in transaction FBL*N.
    Regarding the Special Fields, please see SAP Note 215798.  This note will explain that the special fields need to be in table T021S as well as in the RFPOSXEXT structure which can be verified in SE11.  If these fields are not yet in RFPOSXEXT see Note 215798 (you can verify this in RFPOSXEXT by going to the bottom of the structure and see under column 'Component' that special fields are denoted by 'U_XREF1').  You may see a field XREF1 under the 'Component' column, but these fields are NOT the special field.  The special field is denoted by U_fieldname!!!
    However, the field BKPF-XREF1_HD is used in Real Estate module. In this field, you can define control information for all line items.This field is used in third-party management in RE to assign a business transaction to a third party.
    Please note that table BKPF is not directly selected in the logical database, so the usage of the field in the selection views in SE36 will not work. So you may have to create the field in the index tables.
    I hope this information helps.
    Thank you.
    Suresh Jayanthi.

  • BAPI or FM for Material and ChapterID Combination(J1ID Transaction)

    Dear All,
                    I need BAPI or FM  for Creation of Material and ChapterID combination. I dont need for other options present in J1ID Transaction.
    I cannot use Insert statement  for Material and ChapterID  Creation  as it contains only few fields.
    Please let me know regarding this.
    Regards,
    Anilkumar

    Hello
    The bapi BAPI_INSPECTIONPLAN_CREATE is used for creation. There you can assign several materials through structure MATERIALTASKALLOCATION (BAPI1191_MTK_C). There is no bapi for modifications so you can assign other materials using LSMW or BDC as Gururaj told you or in this special case populate table MAPL directly (better talk to your ABAP to decide it); I did it without issues and I checked and the function CZ_VB_MAPL_POST could update the information you need (talk to your ABAP to validate it).
    Best regards
    Carlos Díaz

  • How to create a measure for COUNT and compare year-to-date/last year?

    Hello expert,
    I have gone through the Oracle by example tutorial for creating the repository. However, I can't find out how to create a measure to display the COUNT (sequence ID). I tried the Aggregation function on the sequence ID on the Fact table but the report on Answer listed out all the sequence IDs in the database. And did not give me the count of the transaction for the period quarter. If I used the sequence ID on Dim table, the SQL failed.
    And also I want to have two counts, one is for the count of transactions by quarter. Another is for count of transaction for the same period quarter.
    Please help.
    Thanks.....

    If you use count (or count distinct ) as the aggregation rule in the dropdown in the repository column, it should work. Or you can post the generated logical and physical sql here.

  • Reference Table and Fields for Units and Currency

    Can anyone advise on what the reference tables and fields are for currency and quantity key figures? Thanks
    I think for currency the table is TCURC and field is WAERS, does this make sense, not sure for the quantity though
    Message was edited by:
            Niten Shah

    Hi try these -
    TCURC          (Currency codes)
    TCURF          (Translation factors)
    TCURN          (Notations)
    TCURS          (Exchange Rate Spreads)
    TCURT          (Description of the Currency Code)
    TCURV          (Exchange rate types for currency translation)
    TCURW     (Use of exchange rate types)
    TCURX          (Decimal places of the currencies)
    Regards
    Vikash

  • On forms central -- can you format fields for phone # and zipcode

    is a form is sent out, the data that is returned is non -formated, or if i collect a field called zip code and it has a 0 as the zero is not returned

    I realized something - I would recommend that you change the field type for the Zip Code and Phone number fields, I'd guess you are using a "Number field" and should consider using "Text Field". 
    I have a habit of using "text" fields for zip codes and phone numbers, using a text field the entire string (with leading 0s) is submitted to the response table.
    If you use a Number field the leading "0" is stripped out but if you use a text field the entire number entered by the user will be shown in the response table.
    Thanks,
    Josh

  • Fields for Arrear and Net due date in FBL5n

    Dear FI expert,
    In FBL5n I need the fields for "Arrear" & "Net due date".
    Can anybody tell me exactly the fields and tables?
    Or any other FM for getting those?
    Thanks & Best regards
    Bishnu
    06/04

    hi
    check whether this spro path can help
    Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Line Items --> Display Line Items --> Display Line Items without ALV --> Define Additional Fields for Line Item Display

  • UI use my field for drag and relate

    Hi.
    I am not able to use my own fields I created via UI for drag and relate.
    I can hold the left mousebutton pressed on the field but I don't get the
    border around the field to drag it.
    I know that this is currently not supported by the SDK.
    Can you please implement this?
    Best regards,
    Manuel Marhold
    SoftChip EDV-Systeme GmbH
    Gutenbergstr. 25
    49479 Ibbenbueren GERMANY
    Fon: +49 5451-54703-40
    Fax: +49 5451-54703-22
    Web: www.softchip-edv.de

    My suggestion is to move you entire home directory on to the hdd and leave the ssd for the os and your key applications.
    How to Move the Home Folder in OS X – and Why
    Move your home directory to another location

  • MMBE transaction fields for BATCH and ITS Quantity

    Hi Gurus,
               I am developing a report to get the details of material like Material code, Material type, Material Group, Material Group1, Special stock indicator, Special stock Numb, Batch and its quantity.
             Can any one suggest the table from where i cud fetch Special stock numb and its indicator , batch and relevant quantity of the material.
           My client is referring to standard transaction MMBE and wants me to get the details from there.
          I would like to take this opportunity to thank you in advance for your valuable suggestions.
    Thanking You,
    ZIa

    Hi,
    The following tables used for MMBE...Just identify your table & fields....
    TABLES: kna1,                     "Kundendaten auf MandEbene
            lfa1,                             "Lieferantendaten auf MandEb.
            lfm1,                             "Lief.daten auf EkOrgEb.
            tcurm,                            "Customizing (Bew.kreisebene)
            makt,                             "Material-Kurztexte
            mara,                             "Materialdaten auf MandEbene
            marav,                            "Materialdaten mit Kurztext
            marc,                             "Materialdaten auf Werksebene
            marcv,                            "Materialdaten auf Werksebene
            mard,                             "Materialdaten auf Lagerort
            marm,                             "Mengeneinheiten zum Material
            mchb,                             "Chargenbestaende
            mcha,                             "Chargen
            mch1,                             "Chargen
            mkol,                             "Lieferanten-Konsignation
                                              "Mehrwegtransportverpackungen
            msca,                             "K.Auftragsbest. beim Lief.
            mska,                             "Kundenauftragsbestand
            msku,                             "K.Lergut und K.Konsignation
            mslb,                             "Lieferantenbeistellung
            mspr,                             "Projektbestände
    *<<<    hier später weitere Bestandstabellen ergänzen
            ekbe,                             "enth. WE-Sperrbestand
            ekpo,                             "Bestellposition
            resb,                             "Reservierungsposition
            vbbe,                             "Bestände des Vertriebs
            t001,                             "Buchungskreistabelle
            t001l,                            "Lagertabelle
            t001w,                            "Werke
            t006a,                            "Zuo. externe - interne ME
            t134t,                            "Texte zur Materialart
            t148,                             "Sonderbestände
            t148k,                            "Sonderbestände Sicht MM_BD
            t136,                             "Bestandsfelder je Anz.Version
            t136a,                            "Bestandsfelder je Anz.Versio
            t136e,                            "max. Felder Einzelliste
            t136f,                            "max. Felder Grund/Aufrißliste
            t136v,                            "Anz.Version zur Einzelliste
            t157b,                            "Texte Bestandsfelder
            t320,                             "Lagernummer zu Werk/LgOrt
            t340d,                           "JH/13.05.98/4.0C
            rmmmb,                        "Hilfsfelder
            rmmme1,                      "Hilfsfelder für alt. MEs
            sscrfields.                      "Hilfsfeld Sel.bild SW/8.10.98

  • Table and field for RP Backflush checkbox in MFBF transaction

    Dear All,
    I am working on enhancement for transaction MFBF wherein on MFBF screen RP backflush check box is part of enhancement.
    When I do operational confirmation by keeping check for RP backflush then it save the entry.
    I can see the operation entry in AFRU but I can not see the check for RP backflush check box.
    Can anybody help me by providing the information that in which table I will get RP backflush check box entry for the MFBF operational confirmation?
    Or else provide the logic that how system find/determine that user has selected/checked the RP backflush checkbox?
    Thanks,
    Narresh

    Hello Naresh,
    The purpose of the RP backflush to confirm the operation and component is assigned to such operation (reporting point) then the components and activities gets posted and during the last reporting point generally GR happens. For RP backflush maintained mailstone confirmation in control key indicator and same control key assign to operation in routing.
    Please check this table S028, CEZP and CPZP for RP backflush information.
    I hope this information helpful to you,
    Thanks & Regards
    Umesh Mali

  • BPEL assign count and node value from xml

    I have mapnames.xml in the project with nodes like this:
    <mapname>STATUS_DIMS_LOAD</mapname>
    <mapname>MOVEMENT_DIMS_LOAD</mapname>
    The xml of mapnames will be used for an input variable for a FlowN invoke.
    Trying to count the number of mapnames in the xml document and put in a variable.
    <assign name="getMapNamesN">
    <copy>
    <from expression= *"count(bpws:getVariableData('... ? " />*
    <to variable="FlowN_Dims_Count"/>
    </copy>
    </assign>
    Then use that in the FlowN
    <bpelx:flowN name="FlowN_Dims" N="bpws:getVariableData('Flow_Dims_Count')" indexVariable="Index">
    And then inside the FlowN, get the actual mapname using the index.
    <assign name="Assign_Dims">
    <copy>
    <from expression= *"bpws:getVariableData('... ? [',bwps:getVariableData('Index'),']') " />*
    <to variable="Invoke_Dims_InputVariable" part="InputParameters"
    query="/ns8:InputParameters/ns8:P_MAPNAME" />
    </copy>
    </assign>
    What is the syntax to
    1. Count the number of mapnames in the xml document?
    2. Use the FlowN index to assign the mapname to an input variable?

    That looked hopeful, but it did not show how to create the variables and I do not know the syntax for making an array variable.

  • Newbie: Using Fields with XML and Node.getNodeType()

    How do I know what returned value from the getNodeType method corresponds to the field values? Looking at the documentation for the Node object I can see where the fields are listed, but there are no corresponding values?
    For instance I used "getNodeType" on an Element Node and it returned a short value (1). How do I know that 1 corresponds to Element_Node?
    Hope I explained this well enough... I'd appreciate any help.

    This is a common problem fo beginners. My best programming instructor said that you should never hard code literal numbers into a method. So to be more direct here's how you do it.
    //some node is a reference to an instantiated node
    if (someNode.getNodeType() == Node.ELEMENT_NODE) {
       //this is an element node
    //or
    switch (someNode.getNodeType()) {
       case ELEMENT_NODE:
          //this node is an element node
          break;
       case ATTRIBUTE_NODE:
          //this node is an attibute node
          break;
    }

  • SAP GUI 7.10 rev 1 for OSX and WIN XP with transaction MIGO

    Hello,
    When I start transaction MIGO and MIGO_GR, with SAP GUI 7.10 rev 1, I only get a blank screen.
    I've  tried it in OSX 10.4.9, OSX 10.5.1 and Windows XP, all with the same result.
    SAP GUI 7.10 gives the correct screen.
    Do you have a solution for this ?

    Hi John,
    I can reproduce what you are describing. Looks like this problem has been introduced as a side effect of a change for solving another issue
    We are going to look into that. In case you want to be able to track the process and get a notification when the fix is available, please create a [support message|https://service.sap.com/message] on component BC-FES-JAV with the description you have posted here.
    Best regards
    Rolf-Martin

  • Set new Required Field for MD14 and MD15 for conver from Planned order to P

    Dear all,
    I would like to set new required field (Purchasing Organization)  in T-CODE MD14 and MD15 for convert from Planned Order to PR. What's should I do?
    Please help, I 'm new for MRP.
    Best Regards,
    Kate

    Hi Kate,
    You are not on the right track; MD14 and 15 will choose the PLANNED ORDER population for the conversion. In planned orders there's NO PURCHASING ORGANIZATION DATA (normally)!
    So even if you managed to put the field on the screen, it will not do anything that makes sense.

  • PFI line for counter and digital boolean input simultaneously

    Hi,
    I have a question concerning the digital I/O and the counter.
    I use a 6210 card for detecting a TTL signal. Physically I wire the TTL output of the device to the PFI0 port for the front counter (ctr0). Meanwhile, I use the same port (line0) for a digital boolean acquisition task. 
    The problem: the counter worked well, but the the boolean indicator sometimes missed the pulses. 
    Thanks in advance for your help!
     KXZ

    Hi KXZ,
    I made the test in MAX and everything was ok.
    What do you mean by " boolean indicator sometimes missed the pulses"?
    Best regards.
    Sabri JATLAOUI - Certified LabVIEW Developer

Maybe you are looking for

  • Is there a way to check if the touch screen and display works whilst iPod is apart?

    Hi, I pulled my iPod Touch 4G apart up to the circuit board in order to pull out the headphone socket. Before I pulled it apart, the screen was cracked but everything was perfectly visible and the touch function worked perfectly. Because the screen w

  • Syncing iPad 2 and also iPhone 4

    Hi I have just bought an iPad 2 and also have an iphone 4. Can anyone tell me if I can sync them both using the same iTunes account even though I want differnt stuff on each of them. Many thanks

  • HT1551 Apple tv hdmi splitter

    I just purchased apple tv and have only 1 HDMI port on my tv which connects the tv to the cable box.   Do I need a splitter to connect apple tv hdmi cable to my tv ?

  • R/3 Material description not replicating in SRM CC-Hubwoo

    Hi experts, I have an issue with the material description, I dont have much knowlodge in EBP and im new to SRM. Material description in R/3 and CC-Hubwoo are not matching. Can any body help me regarding the issue..... Thanks in advance, Krish.

  • Cancellation of exciseinvoice  in depo

    Dear All, we have done goods receipt  for 100 line items & excise invoice is updated while doing gr .in this  2 line items are billed to customer.Now we have identified in the same goods receipt 5 line items are wrongly posted & we want to reverse th