Field Group Layout Generation Error
Hi Experts,
I have Created a custom field group using Tr EEWB. now i want to do PCUI customization.
I Have created custom field group and Field Group Structure in tr CRMC_BLUEPRINT_C. now when i am going to create layout for the field group msg coming-
"Program CRM_BSP_LAYOUTC_GENERATE
No field group was selected in the blueprint table"
Please guide me.
Regards!!
Have you included the field group as part of the application layout? Also have you assigned a MAC to the structure referenced by the field group?
Once you have done those steps, then the field group should normally generate.
Take care,
Stephen
Similar Messages
-
Layout generation error!!!
Hi ,
I created some Field Groups and have given the Field Structure. But when I try to do the Layout Generation for the field groups I get the error "No field group was selected in the blueprint table"
Can somebody help.
Regards,
ShinyFirst of all, check that you have assigned a structure (screen structure) to a newly created field group: start transaction CRMC_BLUEPRINT_C, then follow Application Element -> Field Group -> Field Group. If structure is provided, make sure that it is a DDIC struture.
If it won't help, define an application layout in CRMC_BLUEPRINT_C with that field group for an applicication you want to use it with.
The really thing could help you with generation process is the CRMC_BLUEPRNTC table (check with se16). It should contain an entry for your field group. If it's not - this is the problem. -
Layout generation field group could not be read completely
Hello,
if I try to generate some field groups which I have copied on a new sight and changed afterwards I get the error:
Layout not saved as warnings or errors occurred during layout generation:
ACT_DETAIL_TASK ZNEW Field group could not be read completely
This happens only with certain objects not at everyone ?
Thanks in advance
MichaelHi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal. -
Problem with Field group and layout generation
Hi,
Previously we customized the field group OPP_DISPLAY_SEARCH_RESULT_50 using transaction CRMC_BLUEPRINT_C ( for accplication CRMD_BUS2000111) for our own custom view and the whole thing worked smoothly. However while changing the layout (adding and taking out some field) I came across issues. I am pretty familiar with PCUI and have done some work on this previously. However this time generating and regenerating this field group ( AFTER some changes) has no effect when the PCUI gets executed with that particular view...
I have used crmc_pcuitools to confirm that the field group in question is the one mentioned aboveand since its not contained in any reference grp, generating the layout for only this field group should be sufficient. However this generation doesn't take effect at all when the PCUI IS EXECUTED. After the generation I made sure that the table CRMC_LAYOUTC does contain generated layout entries for the respective views etc..
I have also created a test view and completed the similar customization and it didn't work as well. We are at CRM version 5 with SP6. Previously ( around 7,8 month back) the whole procedure worked fine..
Am I missing anything..
ThanksHello,
What are you trying to modify?
If it is the search result list, it should be OPP_DISPLAY_SEARCH_RESULT_50 that you have to regenerate with the correct view and field group variant.
If it is the information tab, it s OPP_OVERVIEW_50 that needs to be regenerate.
Regards,
Frederic -
Error when replacing field group
Hi All,
I copy standard application CRMD_BUS2000126 to ZRMD_BUS2000126 .
I need to replace the fieldgroup ACT_OVERVIEW_50 of application ZRMD_BUS2000126 (new floor plan, version 0001), which is assign to event ACT_DETAIL_GENERAL, to exactly the copy of that fieldgroup, let say ZCT_OVERVIEW_50.
After replacing, I tested it and found error message (short dump).
How can be an error message produced? It is like I just change the name of the field group to a new one. All the dependent entries are remain the same.
Is there someone can explain?
Points will be rewarded.
Thank you.
edward.it is solved.
Layout generation is the answer. -
PCUI error: Field group could not be read completely
Hello,
I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
Has anybody else tried to change the contents of that application in that tab?
Regards
ThomasHi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal. -
How to create new field groups in AA master data screen layout?
Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas -
Add field group to Asset Master Data Screen Layout
Hi Gurus !!
Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
Thanks a lot,
SashaI don't think you can add a funds center to the Time dependent tab.
Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center. -
Dynamic screen layout - Hide Field Group until user selects country
Hi.
Does anyone in the PCUI commuity know how to hide a particular reference field group (field group that contains several fields) and only make it visible when the user selects a particular value from a dropdown in a differen field group on the same screen.
Regards
SergioHi,
I am trying to do something similar in Advance search area of Opportunity. I want to hide few fields for non managers. I created field group variant and added that to field group and all the fields. I modified method if_crm_bsp_model_access_il~get_fieldgroup_variant. I put breakpoint at this method and it does get executed but the page doesnt load correct variant. Did you get this to work? if so can you please share your experience on what else do I need to change to make it work.
I have separate thread going regarding this issue. Here is the URL for that:
[SAP CRM: People Centric UI (Read Only Archive);
Thank you,
AP -
Customizing-----Layout Generation!
Hi
When I tried to use transaction "Layout Generation" for a field group.
a error message was shown as "Field group could not be read completely"
anyone know how can I correct the error?
Thanks lot!
EricThis error could be for several reasons.
Are you trying to regenerate a field group included in other? If yes, you always have to regenerate the "father" fieldgroup.
Ex:
FG1 includes FG2 and FG3
You have to regenerate FG1
Check if this help
Regards -
Hi,
I have created a ZACC_VW for the CRMM_ACCOUNT Application. I have maintained the customizing Entries for the following: (on view ZACC_VW)
Application
Toolbar Group
Tab Group
All of these work fine when I use the BLVIEW parameter.
Now, I am trying to hide certain fields on the Detail Tab. I found that the ACC_SRES_01_V1 is the field group being used. In CRMC_BLUEPRINT_C - Field Group Structure, I maintained the entries for ACC_SRES_01_V1 (Instead of 5 reference groups, I have left only 3). I then generate the layout for ACC_SRES_01_V1/ZACC_BMG.
When I view the application again, I still see all the fields. I am not able to figure out what am I missing?
Thanks,
RanjanHi Arun,
Yes, I am viewing the application for the ZACC_VIEW (the BLVIEW querystring).
In CRMC_BLUEPRINT_C - Field Group - Field Group Structure, I have maintained the following entries for ACC_SRES_01_V1:
ZACC_VW 10 ACC_SRES_NAME_V1 SCGR Screengroup
ZACC_VW 20 ACC_SRES_ADDRESS_V1 SCGR Screengroup
ZACC_VW 30 ACC_SRES_COMM_V1 SCGR Screengroup
ZACC_VW 40 ACC_SRES_CONTACT_V1 SCGR Screengroup
then I go to Layout Generation and generate the layout for ACC_SRES_01_V1/ZACC_VW.
When I try the application on ZACC_VW, I still see the fields in ACC_LOG_SALES_CLASS (which is the group I excluded in the ZACC_VW)
Thanks,
Ranjan -
Smartform report generation error
Hi,
I have a problem with a report calling a smartform. The report works perfectly on the 1 system but on the other system there is a generation error. I found that the problem lies with the following declaration:
data: otf_info type SSFCRESCL.
I compared the structures on the different systems and they are identical. The only difference is the Support Package levels. The error occurs on the system with the higher support package - SAPKB64015 (basis and aba) whereas the other system is still at level 12 (SAPKB64012).
Any ideas what is causing the generation error and what could be done to fix it?
Regards
Liza-MarieHi ,
I think there may be some errors in function group errors.
Try the following :
T/Code : SMARTFORMSEnter the name of the form> Test--> This will leads to function module --> Utilities(Menubar)-=-> Repair function group --> Repair.
After repairing the function group --> Save and Activate.
Then transport the Smartform to other system .
Regards,
Lanka -
Hi All,
I am loading data for Sales Item for this i have enhanced the DataSource. Now while i am loading the data to DSO it is giving error while activating the DSO--SID generation error as it found some hex. values.
To overcome this i tried with TOUPPER formula for that field but still it is giving error. So i have removed unchecked the check box 'SID generation upon activation' as i am not going to use this DSO for reporting.
But i am transferring data to InfoCube where again it is giving the same error.
Kindly help me out to overcome this error.Hi
Always Load Master Data before Transaction data to get rid of SID Generation Error.
And Hex Values FM -- CHAR_HEX_CONVERSION.
http://help.sap.com/saphelp_nw70/helpdata/EN/48/b4e431c0ca11d2a97100a0c9449261/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/25/73725c700511d3aa40006094b92fad/frameset.htm
Re: How-to convert a character to its hex value?
Hope it helps -
Z Role not visible in the Field Grouping
Hi all
I have created(copied an Existing to a new) a Z Role in the System !
And Saved it ! I could see it as an element in the BP View !
Now I went to do the Field Grouping ! Under Basic Settings of BP, I selected the Filed Groupings --> Configure Field Attributes per BP Role !
When I tried adding my Z Role as a New Entry, I get the error : "Entry does not exist in TB003" !
What I am missing out ?
Any Help !
Thanks
FYI : CRM 5.0
ThankHi Jack,
Please look in to SAP Note : 726197
Reward if it helps
Best Regards,
Johnny. -
How to make fields in field group as text fields in ABAP query
Hi friends,
I a have a ABAP query 85 corresponding to infoset A205,
there is a field group in the infoset A205 and it contains some fields
but some of the fields are made as text fields ................i want to know how to make these fields in
the field group as text fields.
there is a small icon " T " on the field when it is made as a text field .
Please help me
Thanks & RegardsHi,
IF you can specify which Field Catalog then it will be useful for us to provide appropriate answer.
1. For Customer Master
IMG> Financial Accounting New> Acs Recev and Acs Payable --> Customer Accounts --> Master Data --> Preperation of creating customer master Data --> Define Account Groups with screen layout (customers)
In that you can create your own account group, and click Details Screen.
There will Field Status header within that are listed three main areas
General data
Company code data
Sales data
When you double click these lines it will take you into "Status Group" Overview. Wherein under "Select Group" are listed fields Address, communiucation.... Double click on one group , you will bet aken into the group field wherein you will find 4 colums with indicators assigned to it. ( Suppress, Req. Entry, Opt Entry, Display) you can choose the required option. "Req. Entry" against the field. Click save after you complete your selections.
2. Similarly you can do for Material Master in
IMG --> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
But be careful when you do it for material master as it is cuts across all the modules...
Regards
Sathya
Maybe you are looking for
-
Mac won't open pdfs from web links.
I am running Mac OS v 10.5.8 and it suddenly stopped displaying PDFs that are opened via web links. All I see is a grey screen with the file title.pdf at the top, no error message. Has anyone experienced this or aware of a fix? Soooooo frustratin
-
LR unbearably slow. What's up with this?
I recently bought and installed LR v1.1 and just upgraded to 1.2. However, it is so unbelievably slow that it is basically not useable. I have had it for about 3 weeks now, and have yet to even get to teh point where I can create a JPG, however the h
-
I just purchased a minidisplay to HDMI adapter (the brand is rocketfish) and the HDMI cable (the brand is mediabridge), and when I try to connect my macbook pro (mid-2010) to my TV the screen on my computer flashes blue a few times, and then goes bac
-
ORA-01079: ORACLE database was not properly created, operation aborted
Hello everyone, On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 My problem is that I've to drop the database as the same is not created properly. For that, I get the below error when I try to mount the database. ORA-01079: ORACLE databas
-
Design Patterns needed for SAP XI
Hi