Field in structure 'is not defined in the ABAP Dictionary'
Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
David
Hey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin
Similar Messages
-
RV13B is not defined in the ABAP dictionary
Hi Experts,
Iu2019ve a requirement to create a smartform,and then save it as a pdf and email. I have all of this done except for one part. At present my email address (for testing purposes) is hard coded as the email address. However I want to automatically pick up the email address to which my form is to be sent.
The email address is found in transaction mn22. The pdf will be emailed to RV13B-PARNR (Partner) based on KOMB-LGORT (storage location). Each storage location is unique.
Iu2019ve put in the following code:
SELECT PARNR FROM RV13B INTO CORRESPONDING FIELDS OF TABLE it_vemail[]
WHERE stor_loc EQ KOMB-LGORT.
However Iu2019m getting the error RV13B is not defined in the ABAP dictionary as a table, projection view or database view.
Could anyone give me some help?
Thanks,
Mike.Mike,
F1 Technical help will not give you the table name in some cases.Instead of the table it will refer to the structure.In such a case you need to get the corresponding table for that field either from SQL trace or searching the possible tables with such field using SE84 which requires a bit of analysis in zeroing on the correct table where you can get the appropriate data related to that field.
SE84>>ABAP Dictionary>>Fields>>table fields.
Give PARNR and get the list of the possible tables containing PARNR as a field.If one is aware of the functionality then it will be easier to zero in on the field and the corresponding table from that list.
SQL trace can help you in tracing out the possible tables used by a transaction code.ie if you do a SQL trace on VA01 you will come to know all the possible tables of VA01.
Thanks,
K.Kiran. -
ZSD_TABLE is not defined in the ABAP dictionary as a table"
Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
ThanksHi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna -
DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - during Post Processing phase we are getting the following error :
(screenshot attached)
4 ETG003 Table "DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTF~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT~" does not exist in the ABAP Dictionary\
1. Am not sure why Shadow tables are considered in this phase ?
2. What steps i can follow to fix this error ?[I tried activating those using se14 but activation button is disabled].
3. I have a option to ignore and move forward but am not sure about the side affects ?
Source ECC6 Ehp5 702 on Oracle.
Target ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
Thanks
DevHi Avinash,
two comments on this:
This is not an issue, as this text is NOT an error message.
(An error message lists the "E" as second character,
but the screenshot above shows a space as second character.)
The log handling for this phase will be adapted in SUM SP13, so that non-errors are not listed at this point, to avoid this confusion.
SUM 1.0 SP12 PL 1 to PL 3 must not be used any longer, see SAP Note 2122247.
Regards, Boris -
PCI_MSI_CAPABILITY data structure is not defined in the wdm.h?
Hi
I cannot find the PCI_MSI_CAPABILITY data structure definition in the wdm.h. I found
PCI_CAPABILITIES_HEADER and
PCI_PM_CAPABILITY
etc. are defined in the wdm.h. Am I missing something?
Thank you,
TigerThe webpage
https://msdn.microsoft.com/en-us/library/windows/hardware/ff537579%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396 states it is not included. Why do you think you need to reference it?
Don Burn Windows Driver Consulting Website: http://www.windrvr.com -
Getting a field's title from the ABAP dictionary
Hi All,
I'm learning ABAP and want to include field titles in my program output from the ABAP dictionary, rather than coding them as text elements.
Is there a function module to do this? Can someone provide some sample code?
Cheers,
SteveTry this function.
data: label type string.
CALL FUNCTION 'DDIF_FIELDLABEL_GET'
EXPORTING
tabname = 'MARA'
FIELDNAME = 'MATNR'
* LANGU = SY-LANGU
* LFIELDNAME = ' '
IMPORTING
LABEL = label.
Regards,
Rich Heilman -
The tax code entered is not defined in the company code country.
Dear sap guru's
I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
Tax code V0 in procedure is invalid
Message no. FF704
Diagnosis
The tax code entered is not defined in the company code country.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system
settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax procedure has been allocated to the
company code country. The Procedure field is on the detailed screen.
2. If you need a new tax code, you can create one yourself.
For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
please suggest what could be the exact problem
Regards
SujitHi Sujit,
1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
3.Also things to be checked
1> assign country to company code
2> assign company code to tax code
3> create tax code for country IN
4.Under the following menu path, pls check if you have assigned your tax code to Company Code
IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
Hope it clears,
Rahul. -
Error Infosource is not defined in the source system
I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanksthe data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing . -
Infosource 8ZISCMS10 is not defined in the source system
Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name) -
The tax code entered is not defined in the country for this company code
HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
The tax code entered is not defined in the country for this
company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the
system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure
is assigned to the relevant country. the Procedure
field is in the detail screen.
2. Create a new tax code if required.
Thanks & Regards
AarmanYou can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA -
SFLIGHT is NOT defined for the current logical database.
I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
carrid LIKE sbook-carrid,
connid LIKE sbook-connid,
fldate LIKE sbook-fldate,
bookid LIKE sbook-bookid,
order_date LIKE sbook-order_date,
loccuram LIKE sbook-loccuram,
END OF sr.
GET sflight. <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254. -
"PERNR" is not defined for the current logical database.
Hi Experts,
I have developed a program for HR salary variance but when i execute i getting error in the line " get PERNR"
the "PERNR" is not defined for the current logical database. so plz suggest me to avoid this issue.
Thanks,
Rajeshthe codes are has below,
*& Report ZHRSAL_COMP
REPORT ZHRSAL_COMP.
tables: pernr,
t512t. "Wage type texts
infotypes: 0001. "Organizational Assignment
*Tables data containing directory to PCL2 payroll results file.
data: begin of rgdir occurs 100.
include structure pc261.
data: end of rgdir.
data: result type pay99_result.
data: rt_header type line of hrpay99_rt.
data: country like t001p-molga,
number like pc261-seqnr. "Number of last payroll result
types :begin of struc_p0001,
pernr type p0001-pernr,
ename type p0001-ename,
werks type p0001-werks,
btrtl type p0001-btrtl,
end of struc_p0001.
data : gtab_p0001 type table of struc_p0001,
gwa_p0001 type struc_p0001.
types : begin of struc_payroll,
text(10) type c,
date type dats,
month(2) type c,
year(4) type c,
abkrs(2) type c,
end of struc_payroll.
data : gtab_payroll type table of struc_payroll,
gwa_payroll type struc_payroll.
types : begin of struc_result,
lgart type lgart,
lgtxt type t512t-lgtxt,
betrg type betrg,
end of struc_result.
data : gtab_result type table of struc_result,
gwa_result type struc_result.
get pernr.
rp_provide_from_last p0001 space pn-begda pn-endda.
call function 'CU_READ_RGDIR'
exporting
pernr = p0001-pernr
importing
molga = country
tables
in_rgdir = rgdir
exceptions
no_record_found = 1
others = 2.
if sy-subrc = 1.
write: / 'No records found for '(001), pernr-pernr.
endif.
call function 'CD_READ_LAST'
exporting
begin_date = pn-begda
end_date = SY-DATUM
importing
out_seqnr = number
tables
rgdir = rgdir
exceptions
no_record_found = 1
others = 2.
if sy-subrc = 1.
write: / 'No payroll result found for'(002), pn-paper.
else.
call function 'PYXX_READ_PAYROLL_RESULT'
exporting
clusterid = 'RX'
employeenumber = p0001-pernr
sequencenumber = number
READ_ONLY_BUFFER = ' '
READ_ONLY_INTERNATIONAL = ' '
CHECK_READ_AUTHORITY = 'X'
IMPORTING
VERSION_NUMBER_PAYVN =
VERSION_NUMBER_PCL2 =
changing
payroll_result = result
exceptions
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
others = 8.
if sy-subrc = 0.
perform print_rx.
else.
write: / 'Result could not be read (003)'.
endif.
endif.
FORM PRINT_RX *
Print Payroll Result *
form print_rx.
format intensified on.
write: / p0001-pernr,
p0001-ename(15),
p0001-werks,
p0001-btrtl.
format intensified off.
skip 1.
move p0001-pernr to gwa_p0001-pernr.
move p0001-ename(15) to gwa_p0001-ename.
move p0001-werks to gwa_p0001-werks.
move p0001-btrtl to gwa_p0001-btrtl.
append gwa_p0001 to gtab_p0001.
write: / 'For period/payroll area: '(004),
30 result-inter-versc-fpper+4(2),
result-inter-versc-fpper+0(4),
result-inter-versc-abkrs,
/ 'In-period/payroll area: '(005),
30 result-inter-versc-inper+4(2),
result-inter-versc-inper+0(4),
result-inter-versc-iabkrs.
skip 1.
gwa_payroll-text = 'For'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-fpper+4(2) to gwa_payroll-month.
move result-inter-versc-fpper+0(4) to gwa_payroll-year.
move result-inter-versc-abkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
gwa_payroll-text = 'In'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-inper+4(2) to gwa_payroll-month.
move result-inter-versc-inper+0(4) to gwa_payroll-year.
move result-inter-versc-iabkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
write: 'Results table: '(006).
skip 1.
loop at result-inter-rt into rt_header.
perform re512t using result-inter-versc-molga
rt_header-lgart.
write: / rt_header-lgart,
t512t-lgtxt,
rt_header-betrg currency rt_header-amt_curr.
move rt_header-lgart to gwa_result-lgart.
move t512t-lgtxt to gwa_result-lgtxt.
move rt_header-betrg to gwa_result-betrg.
append gwa_result to gtab_result.
endloop.
endform. "print_rx
FORM RE512T *
Read Wage Type Texts
form re512t using value(country_grouping)
value(wtype).
check t512t-sprsl ne sy-langu
or t512t-molga ne country_grouping
or t512t-lgart ne wtype.
select single * from t512t
where sprsl eq sy-langu
and molga eq country_grouping
and lgart eq wtype.
if sy-subrc ne 0.
clear t512t.
endif.
endform. "re512t -
I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.modifyx(Unknown Source)
at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invokeTHanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code")); -
BDCDATA error-Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
Hi
I am trying to call transaction MIR7 from ABAP code and passing values to the same.
I am able to pass data to first tab using code (as recorded in SHDB) :
DATA BEGIN OF BDCDATA OCCURS 1.
INCLUDE STRUCTURE BDCDATA.
DATA END OF BDCDATA.
CLEAR BDCDATA.
BDCDATA-PROGRAM = 'SAPLACHD'.
BDCDATA-DYNPRO = '1000'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'BKPF-BUKRS'.
BDCDATA-FVAL = CompCode.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-PROGRAM = 'SAPLMR1M'.
BDCDATA-DYNPRO = '6000'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'INVFO-BLDAT'.
BDCDATA-FVAL = InvoiceDate.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'INVFO-WRBTR'.
BDCDATA-FVAL = InvoiceAmount.
APPEND BDCDATA.
Call Transaction 'MIR7' USING BDCDATA MODE 'A'.
But when I add fields
CLEAR BDCDATA.
BDCDATA-FNAM = 'INVFO-ZUONR'.
BDCDATA-FVAL = 'HELLO !!!!!'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'INVFO-BKTXT'.
BDCDATA-FVAL = 'MY DATA .........'.
APPEND BDCDATA.
I get an error message :
Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
But when I add
CLEAR BDCDATA.
BDCDATA-PROGRAM = 'SAPLFDCB'.
BDCDATA-DYNPRO = '0150'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
before setting INVFO-ZUONR, the error disappears, still I don't get values in HeaderText and Assignment fields on GUI
Can anybody help.
Thanks a lot
Ruhi HiraI had used the exact recording as in SHDB but no success.
Is it OK to create a parameter map this screen field to the parameter.
Where I can set the parameter outside the screen..
Ruhi Hira -
Data Source Z*** is not defined in the source system
Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny
Maybe you are looking for
-
Is there a way to create a paid Membership site using Muse?
A client is wanting a website that has an area that is available to paid memberships. I have already read on how to create the secure zones, just wondering if there was a way to create a paid membership portion to the form. I have seen several hints
-
Hi experts, I have created a Design Studio application with GridLayout Components to ensure the automatic adjustment. In the local mode everything works fine! If I maximize or minimize the browser window the automatic adjustment of the design studio
-
Help: how to compute duration between 2 dates, when these dates on 2 rows?
Hello, We are on 11g. We have a table with times saved in one column. Then each row as a différent date value. There is no pb to order the query on this date column (obviously) Now, we need to compute the period of time between 2 successive rows. I h
-
Need to replace failing hard drive but I don't have RnR discs
The hard drive has started to fail on my brand new T500 with WIn7 Pro pre-installed. I have not had time to create RnR discs. Lenovo support says they are ready to ship a new hard drive but there is a problem getting the RnR discs put together with t
-
Why can't I update to new iOS on my iPod Touch 3rd generation
My iPod Touch says it is up to date when I update. I have iOS 5.1.1. I would like to install some additional apps on the device but a message says I have to have a newer iOS (at least 6.0). How do I resolve this issue? I have the 64 GB model 1318