Field in the table but not in the datasource

I have a datasource 0co_pc_act_05 based on mbew table . I need a field from that table , which is not present in the datasource , what should i do .?
How can i get the field from the table into the datasource?
Thanks

hi Mike,
try following steps
- in r/3 transaction rsa6 choose the datasource, click enhance strucutre, then append structure, system will propose z..., confirm it, in the next screen, type in the field name e.g abcd
- activate the append structure
- back to rsa6 choose the datasource, click edit, remove mark in column 'hidden' field for that field, save the datasource.
- in this case you no need to do user exit since that field exist in the origin table where the data extracted.
- recheck with rsa3
later in bw side
- create new infoobject, then right click the datasource and 'replicate datasource', change transfer rules, move the new field from right side to left (to be included in transfer structure), then assign the field by type in the new created infoobject name, activate the transfer rules. include also this new object in infocube etc.
hope this helps.

Similar Messages

  • ColumnMargin in the Table but not in the TableHeader?

    Hi!
    Since version 1.4 the JTableHeader uses the same ColumnMargin was set for the Table.
    How can I set columnMargin for the table that isn't used in the header?
    Thx
    Lars

    Lars,
    I'm running into the same problem. Have you come up with a solution or workaround?
    Thanks!
    -Karen

  • My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

    My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc  has been generated, but I don't want to do this.

    What application are you running? Please ask this in the forum of the product you're using.

  • I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

    I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

    Lmwilliamson wrote:
    Kernel panics:
    After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists. 
    I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
    I am able to use my computer in Safeboot mode (only)
    Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
    If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
    If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
    Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
    ..Step by Step to fix your Mac
    Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

  • My movies and music videos won't show up on screen, I can hear the sound but not see the video how do I fix this?

    My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.

    Hi @anthony7722 ,
    Thank you for your query, I will do my best to help!
    I grasp that you uninstalled the Intel graphic driver and the catalyst control.  You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
    When I checked the specifications for your notebook I see that you have switchable graphics.
    Here are two links that I believe will help.
    Overview of Switchable Graphics or Dual GPUs
    Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
    Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
    Please try this process.
    1. Download the chipset driver, and both graphic drivers and save them  but do not install them yet
    2, Delete the chipset driver and install the updated one.
    3. restart your notebook
    4.Delete the Intel driver and install the updated one
    5. restart your notebook
    6. Delete the AMD driver and install the updated driver. 
    You should now have a Catalyst Control Center.
    This should now allow you to use the higher graphic card which should support the higher resolution.
    I hope this helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

  • Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

    opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

    Graphics card is the problem.
    Trying to update drivers now.
    Thanks for your help
    john

  • When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

    When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

    Hi dones49,
    It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
    To find the file, use the information in this article to navigate through the iTunes media folders -
    Locate and organize your iTunes files
    If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
    Download past purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

    the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

    Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

  • The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

    Hey thanx for the help, it worked like a charm.
    I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
    If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
    Cheers again..

  • I have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb

    i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please

    You can sync your iPod with multiple computers, but what can be synced is very limited.  See this article for more details.
    http://support.apple.com/kb/ht1202
    B-rock

  • Ichat works for me when I'm in the US but not in the UK.   In the UK it is like watching a tape played at about 1/10th speed.

    iChat works for me when I'm in the US but not in the UK.   In the UK it is like watching a tape played at about 1/10th speed.  I have O2 broadband (who decline to help as they "do not support third party software").

    Hi
    In iChats prefs click on video and change bandwidth limit to 500.
    Restart iChat.
    Tony

  • My applet works in the appletviewer but not in the navigator

    My applet works in the appletviewer but not in the navigator
    exceptions problem1 and problem2 are throwed
    this is my code
    import java.applet.*;
    import java.net.*;
    import java.io.*;
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ValiderHtml extends Applet implements ActionListener {
    JButton send =new JButton("Connexion");
    JScrollPane jscrollpane= new JScrollPane();
    DefaultListModel lignes=new DefaultListModel();
    JList lstURL = new JList(lignes);
    BufferedReader reader = null;
    String ligne;
    URL url;
    URLConnection conn;
       public void init(){   
       this.setSize(900,400);
       setLayout( new GridLayout(2,1));
       jscrollpane.setBounds(new Rectangle(19,53,160,73));
       jscrollpane.getViewport().add(lstURL,null);
       send.addActionListener(this);
            this.add(send);
       this.add(jscrollpane);
        public void actionPerformed(ActionEvent evt) {
             Send();
       public void Send(){
            try {
       url=new URL("http://www.developpez.com");
       conn = url.openConnection();
       reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
    while ((ligne = reader.readLine()) != null) {
                     lignes.addElement(ligne);
        }//fin bloc try
       catch (Exception e) {
                   lignes.addElement("probleme1");     
                finally{
                   try{reader.close();}catch(Exception e){ lignes.addElement("probleme2");}
       }// fin Send
          public void paint(Graphics g) {
                super.paint(g);
    }// fin Applet

    As for tracking the source of your problem your applet sucks.
    Try e.printStackTrace() on a cought exception and check the (full) trace.
    url=new URL("http://www.developpez.com");
    Unless yor applet is on www.developpez.com this will throw an exception in an unsigned
    applet without special policies.
    Signing applets:
    http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
    second post and last post for the java class file
    http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
    4th post explaining how to set up your own policy with your own keystore

  • SQL patch mismatch: Installed in the PDB but not in the CDB - how to correct?

    I have a 12.1.0.1 database in which I wanted to migrate a number of PDBs to AL32UTF character set. To do this I created a second (temporary) database with the correct characterset, unplugged and re-plugged each PDB and ran the DMA U to migrate the PDBs - all went well.
    I then dropped the first database and built another again with the correct characterset.
    When I unplug and replug the PDBs from the temporary to the new database I get the following PDB violation:
    PDB_ACPT_CLONE     SQL patch 19648840 mismatch: Installed in the PDB but not in the CDB.
    This patch had been applied to the original database and then rolled back before the temporary and new databases were created.
    datapatch shows:
    C:\oracle\product\12.1.0\dbhome_1\OPatch>datapatch -verb
    SQL Patching tool version 12.1.0.1.0 on Wed Jan 21 09:43
    Copyright (c) 2012, Oracle.  All rights reserved.
    Connecting to database...OK
    Determining current state...
    Currently installed SQL Patches:
      PDB CDB$ROOT:
      PDB PDB$SEED:
      PDB PDB_ORCL12C:
      PDB PDB_ACPT_CLONE:
    Currently installed C Patches:
    For the following PDBs: CDB$ROOT
      Nothing to roll back
      Nothing to apply
    For the following PDBs: PDB$SEED
      Nothing to roll back
      Nothing to apply
    For the following PDBs: PDB_ORCL12C
      Nothing to roll back
      Nothing to apply
    For the following PDBs: PDB_ACPT_CLONE
      Nothing to roll back
      Nothing to apply
    SQL Patching tool complete on Wed Jan 21 09:43:44 2015
    C:\oracle\product\12.1.0\dbhome_1\OPatch>
    PDB_ORCL12C was created in the new database.
    The moved PDB is now stuck in RESTRICTED mode.
    Any ideas on how to resolve this?

    Are you sure all PDBs were open when the patch was applied?
    The more common issue is when one version of Apex is installed in the root and a different version installed in a PDB and the PDB is plugged in.

Maybe you are looking for

  • Clear download path in the selection screen

    Hi All, Im facing the problem in the selection screen. User wants to clear the selection screen download path when they are changing the radio button one to another another radio button. this is as below PARAMETERS::pa_werks like ekpo-wekrs,         

  • Vendor Master LSMW

    Dear Experts , While recording an LSMW for vendor master creation , the main address & communication screen is appearing to be very different . Also this doesn't have many of the fields which are normally available in a vendor master . Please tell me

  • Sales order assigned in Purchase Order

    Hi Gurus, I want a report where i can find out sales order no's assigned in purchase orders. Is there any way to find out? I need to manually go to details of each PO to see the sales order no. assigned. Please revert back asap. Thank You

  • PO Message - Dispatch Time

    Hi, I have created a new message type copying data from NEU. I create a condition for this message type with the dispatch time 3 (Send with application own transaction). It is working fine when I create a new PO. But when I change the PO and a new me

  • How to execute the packaged procedure

    Hello i've written the following package: It's created fine but while running that procedure i'm getting the following error create or replace package ttt_example as   TYPE ColumnsInfo IS RECORD (       columnName VARCHAR2 (30),       dataType VARCHA