Field is not showing at transformations

hi
i replicated datasource with enhanced field , when i am making transformations its not available at transformations level, i ma creating new transformations?
any reason?

go first i source system transaction rsa6 look gor your enriched datasource and clic on the pencil to modify it there you will see unhide flag for your fields that are marked so unmark them and follow as you have done so far replication ...
regards
Boujema

Similar Messages

Newly added field does not show in table genarator.

Hi,
I have added one more field to my custom table.
When I make new entries in table maintanance, the new field does not show up.
Thank U for Ur time.
Cheers,
Sam

hai sam raj,
first activate your database table .
if any error occurs better you go to
se14(database utility) -
>give table name in object and select the table check box and click the edit push button.
and then click activate and adjust pushbutton.
surely you ll get some idea.
reward points if those idea helps.
thanks,
velu.

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

New field will not show in the Datasource

Hello Experts,
I enhanced a datasource by adding a new field in the append structure and when I saved and activated and when into RSA5 or RSA6 then double clicked on the datasource my ZZ field does not show at the end. Anyone know why this is?
Datasource: 2LIS_11_VAITM
Extract Structure: MC11VA0ITM
Thanks!

HI,
Once you have appended the structure .
In RSA6 you need to go to the purticular datasource (In change Mode) and need to uncheck the option *HIDE field for the field you have appended .
After you Uncheck that field save and exit.
Hope it is helpful .

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Internal table field does not show data.

hello experts,
I am currently modifying a code in a report where it shows PO's and it amount, downpayment, Invoice, GR, payment and balance. Now the problem is, some of the PO amount(it gets the amount from ekpo-netwr) does not show on the report output. the field is t_amount-netwr. I really need help on this one guys. Thanks and take care!
PERFORM process_with_budat.
FORM process_with_budat.
DELETE t_pohistory WHERE hist_type <> 'A'
 AND hist_type <> 'E'
 AND hist_type <> 'Q'.
LOOP AT t_account.
 DELETE it_dtl WHERE ebeln = t_account-ebeln
 AND psphi IS initial.
 DELETE t_ekpo WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_proj-ebelp = t_account-po_item.
 SELECT SINGLE psphi FROM prps INTO t_proj-psphi
 WHERE posid = t_account-wbs_elem_e.
 CHECK sy-subrc = 0.
 LOOP AT t_pohistory WHERE po_item = t_account-po_item
 AND ebeln = t_account-ebeln.
 t_amount-ebeln = t_account-ebeln.
 t_amount-psphi = t_proj-psphi.
 ON CHANGE OF t_pohistory-po_item.
 CLEAR v_netwr.
 SELECT SINGLE netwr FROM ekpo INTO v_netwr
 WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_amount-netwr = v_netwr.
 ENDON.
 IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
 CLEAR v_netwr.
 SELECT SINGLE netwr FROM ekpo INTO v_netwr
 WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_amount-netwr = v_netwr.
 v_ebeln = t_account-ebeln.
 v_ebelp = t_account-po_item.
 ELSEIF v_ebeln <> t_account-ebeln AND
 v_ebelp <> t_account-po_item.
 CLEAR v_netwr.
 SELECT SINGLE netwr FROM ekpo INTO v_netwr
 WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_amount-netwr = v_netwr.
 v_ebeln = t_account-ebeln.
 v_ebelp = t_account-po_item.
 ELSEIF v_ebeln = t_account-ebeln AND
 v_ebelp <> t_account-po_item.
 CLEAR v_netwr.
 SELECT SINGLE netwr FROM ekpo INTO v_netwr
 WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_amount-netwr = v_netwr.
 v_ebeln = t_account-ebeln.
 v_ebelp = t_account-po_item.
 ENDIF.
 CHECK NOT t_amount-psphi IS INITIAL.
 if t_pohistory-pstng_date LE pa_augdt.
 IF t_pohistory-pstng_date IN so_augdt.
 IF t_pohistory-db_cr_ind = 'H'.
 t_pohistory-val_loccur = - t_pohistory-val_loccur.
 t_pohistory-val_forcur = - t_pohistory-val_forcur.
 t_pohistory-cl_val_loc = - t_pohistory-cl_val_loc.
 ENDIF.
 IF t_pohistory-hist_type = 'A'.
 IF t_pohistory-currency <> 'PHP'.
 t_amount-dpamt = t_amount-dpamt + t_pohistory-val_forcur.
 ELSE.
 t_amount-dpamt = t_amount-dpamt + t_pohistory-val_loccur.
 ENDIF.
 ELSEIF t_pohistory-hist_type = 'E'.
 IF t_pohistory-currency <> 'PHP'.
 t_amount-gramt = t_amount-gramt + t_pohistory-val_forcur.
 ELSE.
 t_amount-gramt = t_amount-gramt + t_pohistory-val_loccur.
 ENDIF.
 ELSEIF t_pohistory-hist_type = 'Q'.
 IF t_pohistory-currency <> 'PHP'.
 t_amount-iramt = t_amount-iramt + t_pohistory-val_forcur.
 ELSE.
 t_amount-iramt = t_amount-iramt + t_pohistory-val_loccur.
 ENDIF.
 ENDIF.
 IF t_pohistory-currency <> 'PHP'.
 IF t_pohistory-val_loccur = 0 OR
 t_pohistory-val_forcur = 0.
 t_amount-tramt = t_amount-iramt.
 t_amount-tramt = t_amount-dpamt.
 ELSE.
 t_amount-tramt = t_amount-iramt.
 ENDIF.
 ELSE.
 t_amount-tramt = t_amount-iramt.
 t_amount-tramt = t_pohistory-cl_val_loc + t_amount-dpamt.
 ENDIF.
 IF NOT t_pohistory-cl_val_loc IS INITIAL.
 CONCATENATE t_pohistory-mat_doc t_pohistory-doc_year
 INTO bkpf-awkey.
 SELECT SINGLE * FROM bkpf
 WHERE awkey = bkpf-awkey.
*AVH - removed wrbtr and dmbtr from selection
 SELECT augdt augbl shkzg FROM bsak
 INTO (bsak-augdt,bsak-augbl,bsak-shkzg)
 WHERE bukrs = bkpf-bukrs
 AND gjahr = bkpf-gjahr
 AND belnr = bkpf-belnr.
*AVH
 if not bsak-augbl is initial.
 select belnr gjahr from bsak
 into (bsak-belnr, bsak-gjahr)
 where bukrs = bkpf-bukrs
 and belnr = bkpf-belnr
 and gjahr = bkpf-gjahr.
 select awkey from bkpf
 into v_bkpf_aw
 where bukrs = 'GLOB'
 and belnr = bsak-belnr
 and gjahr = bsak-gjahr.
 w_len = strlen( v_bkpf_aw ).
 w_off = w_len - 4.
 v_awkey_1 = v_bkpf_aw+0(10).
 v_awkey_2 = v_bkpf_aw+w_off(4).
 select single dmbtr wrbtr from ekbe
 into (ekbe-dmbtr, ekbe-wrbtr)
 where belnr = v_awkey_1
 and gjahr = v_awkey_2.
*AVH - Changed all bsak-wrbtr to ekbe-wrbtr and dmbtr to ekbe-dmbtr.
 IF bsak-shkzg = 'H'.
 ekbe-dmbtr = - ekbe-dmbtr.
 ekbe-wrbtr = - ekbe-wrbtr.
 ENDIF.
 IF t_pohistory-currency <> 'PHP'.
 IF bsak-augdt GT pa_augdt.
 IF bsak-augdt IN so_augdt.
 t_amount-tramt = t_amount-tramt + ekbe-wrbtr.
 ENDIF.
 ELSE.
 IF bsak-augdt GT pa_augdt.
 IF bsak-augdt IN so_augdt.
 t_amount-tramt = t_amount-tramt + ekbe-dmbtr.
 ENDIF.
 ENDIF.
 endselect.
 endselect.
 endselect.
 endif.
 ENDSELECT.
 ENDIF.
 IF t_account-distr_perc <> 0.
 t_amount-dpamt = ( t_account-distr_perc *
 t_amount-dpamt ) / 100.
 t_amount-gramt = ( t_account-distr_perc *
 t_amount-gramt ) / 100.
 t_amount-iramt = ( t_account-distr_perc *
 t_amount-iramt ) / 100.
 t_amount-tramt = ( t_account-distr_perc *
 t_amount-tramt ) / 100.
 ENDIF.
 ENDIF.
 IF t_amount-tramt < 0.
 t_amount-tramt = 0.
 ENDIF.
 t_amount-tramt = t_amount-iramt.
 t_amount-blamt = t_amount-netwr - t_amount-tramt.
 COLLECT t_amount. CLEAR t_amount.
 APPEND t_proj.
 ENDLOOP.
 IF sy-subrc <> 0.
 CLEAR v_netwr.
 SELECT SINGLE netwr FROM ekpo INTO v_netwr
 WHERE ebeln = t_account-ebeln
 AND ebelp = t_account-po_item.
 t_amount-ebeln = t_account-ebeln.
 t_amount-psphi = t_proj-psphi.
 t_amount-tramt = t_amount-iramt.
 t_amount-blamt = t_amount-netwr - t_amount-tramt.
 COLLECT t_amount. CLEAR t_amount.
 APPEND t_proj.
 ENDIF.
ENDLOOP.
endform.
**This is where it transfers the data**
LOOP AT t_amount.
 it_dtl-netwr = t_amount-netwr.
 it_dtl-dpamt = t_amount-dpamt.
 it_dtl-gramt = t_amount-gramt.
 it_dtl-iramt = t_amount-iramt.
 it_dtl-tramt = t_amount-tramt.
 it_dtl-blamt = t_amount-blamt.
 MODIFY it_dtl TRANSPORTING netwr dpamt gramt
 iramt tramt blamt
 WHERE ebeln = t_amount-ebeln
 AND psphi = t_amount-psphi.
 CLEAR it_dtl.
ENDLOOP.

hi ,
just place the code and check for a particular po if its there inthe ekpo table then it has to get it for ur select single query .
but ur logic is build on if --- endif.check this option first of all.
if in the debugging u see the value then as u say in the report output u r not able to see the value then the problem will be space alignment also.
check the value in debugging and let us know first of all . okay
vijay.
IF v_ebeln IS INITIAL AND v_ebelp IS INITIAL.
CLEAR v_netwr.
SELECT SINGLE netwr FROM ekpo INTO v_netwr
WHERE ebeln = t_account-ebeln
AND ebelp = t_account-po_item.
break-point.
t_amount-netwr = v_netwr.
v_ebeln = t_account-ebeln.
v_ebelp = t_account-po_item.
ELSEIF v_ebeln <> t_account-ebeln AND
v_ebelp <> t_account-po_item.
CLEAR v_netwr.
SELECT SINGLE netwr FROM ekpo INTO v_netwr
WHERE ebeln = t_account-ebeln
AND ebelp = t_account-po_item.
break-point.
t_amount-netwr = v_netwr.
v_ebeln = t_account-ebeln.
v_ebelp = t_account-po_item.
ELSEIF v_ebeln = t_account-ebeln AND
v_ebelp <> t_account-po_item.
CLEAR v_netwr.
SELECT SINGLE netwr FROM ekpo INTO v_netwr
WHERE ebeln = t_account-ebeln
AND ebelp = t_account-po_item.
break-point.
t_amount-netwr = v_netwr.

Exception is not showing in transformation step in BPM after activating

Hi ,
I want to cancel the process if any mapping error occur in transformation step for that I designed by below steps.
1.Block step ( mentioned exeption)
2. transformation step ( Inside block mentioned block step exception)
3. exception branc inside block
4. contorl step (Cancel process inside exception branch)
after activating the BPM , in transformation step exception is not showing .
How to resolve this issue how
Please help me
Regards

2. transformation step ( Inside block mentioned block step exception)
Did you define the Exception Handler properly and also used the same in the Exception Branch? If you do a check in IR for your BPM (F7) do you get any error/ warning messages?
Regards,
Abhishek.

Crystal Reports Field Explorer not showing

Hi,
I am using Visual Studio 2003 with the bundled version of Crystal Reports. It has always worked fine until recently the Field Explorer tool bar does not show up anymore when I open a Crystal Report for development. I have uninstalled the entire Visual Studio and reinstalled the Visual Studio but it still will not show the Crystal Reports Field Explorer. However, if I install the Visual Studio on a completely different computer it works fine. Anyone have any idea what could be causing this problem on my main computer? Could it be a setting somewhere in the Visual Studio? I cannot find any information on this problem.
Thanks,
Razzle

Ok, I figured out what the problem was. It was something wrong in my Windows profile. So I deleted my Windows profile and created a new one and it is working now.
Razzle

Freetext items - Field ORDERED_PROD not showing up and no PARTNER_PROD

Hello all
We're on SRM 4.0 with SRM Server 5.0 SP08.
2 issues / questions:
1) When adding freetext items we would like to enter the partner product number (if the user knows it). For this a field named PARTNER_PROD exists but it is not showing up!
I looked at html template bbpsc03/99/saplbbp_sc_ui_its_230.html and dynpro 230 of program saplbbp_sc_ui_its... the field is not in there!
2) But in this template / dynpro the field ORDERED_PROD is there... but why does this one not show up as well???
Any help greatly appreciated
Renaud

Hi,
1) Add PARTNER_PROD field to this screen is not possible in standard
2) the field ORDERED_PROD is linked to gs_scr_itmchoice-product of the screen 110.
Regards
Olivier

Field in Field Catalog Not Showing

Hi,
I have added one field in the copied function module 'zzFI_DOCUMENT_LIST_DISPLAY'.
The field 'Cost center description' is there in the field catalog as well as the internal table.
But it does not show up in the alv columns on output.
Requesting your help.
Varun

>
Abhilash.Kuttan wrote:
> Hi Varun,
>
> Can you provide the field catalog options(code) you have provided for this field and also the parameters you have passed for
> 'REUSE_ALV_LIST_DISPLAY'
>
> Regards,
> Abhilash
Declaration of xbseg
DATA: BEGIN OF XBSEG OCCURS 0.
 INCLUDE STRUCTURE BSEG.
DATA: KONTO LIKE RFPSD-KONTO,
 FAEDT LIKE RFPSD-FAEDT,
 KTEXT LIKE RFPSD-KTEXT,
 KTEXT_GL LIKE RFPSD-KTEXT_GL,
 ASSET_TXT LIKE ANLA-TXT50, "Note 0435578,
 GL_LTXT LIKE SKAT-TXT50, "Note 0446719
 SAKAN LIKE SKA1-SAKAN,
 WAERS LIKE BKPF-WAERS,
 HWAER LIKE BKPF-HWAER,
 HWAE2 LIKE BKPF-HWAE2,
 HWAE3 LIKE BKPF-HWAE3,
* akash *
 LTEXT TYPE CSKT-LTEXT,
*end*
 projk_ext TYPE PROJK_EXT, "Note 575107
 COLOR(3),
 COLFW TYPE SLIS_T_SPECIALCOL_ALV,
 END OF XBSEG.
*Field Catalog*
fieldcat_wa-fieldname = 'LTEXT'.
fieldcat_wa-tabname = 'XBSEG'.
fieldcat_wa-ref_fieldname = 'LTEXT'.
fieldcat_wa-ref_tabname = 'CSKT'.
 APPEND fieldcat_wa TO fieldcat.
ALV Call
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 i_buffer_active = c_x "ALRK241034
 i_callback_program = 'SAPLZZF064'
 i_callback_pf_status_set = 'PF_STATUS_SET'
 i_callback_user_command = 'HANDLE_USER_COMMAND'
 I_STRUCTURE_NAME = 'BSEG'
 is_layout = layout
 it_fieldcat = fieldcat
 i_default = 'X'
 i_save = 'A' "Note 319936
 i_save = l_save "Note 319936
 is_variant = variant
 is_print = gs_print
 it_events = events
 it_event_exit = it_event_exit
 TABLES
 t_outtab = xbseg
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
This is my code. I don't understand whats the problem. Request Help.

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

KOMK Field is not showing up in the field catalog for creating cond. tab

Hi Guys,
I add a new field in KOMK table.
Its showing up in the Field catalog but when I create a condition table, its not showing up in that catalog to choose.
Thank U for Ur time.
Cheers
S Kumar

Hi,
Perhaps you have checked it. Do you check if in SM30 for view VV_T681F_VA you have this field?
Regards,
Eduardo

Field descriptions not showing in page layout

I have custom content types with custom fields. The field types vary - text, image, user and so forth. I am building an intranet so this is a publishing site with workflow and I am using custom page layouts with a custom master page.
The issue I have is that the field controls, whilst all having descriptions, rarely show the description in the custom page layout. They are all shown correctly in EditForm.aspx so I know that they are there. However when editing a page using a custom page
layout it seems that only UserField types show the description. Below is an extract from a page layout:
<SharePointWebControls:UserField FieldName="ContentOwner" runat="server"></SharePointWebControls:UserField>
<SharePointWebControls:TextField FieldName="ContentOwnerRemark" runat="server"></SharePointWebControls:TextField>
The first field ContentOwner shows the field description. The second does not. I have tried deleting and re-adding, making fields mandatory and optional, but to no avail. If it's not a UserField it doesn't show the description.

Showing names of Site Columns on a Page Layout
Thanks. That allows me to do this:
<SharePointWebControls:FieldProperty FieldName="ContentOwnerRemark" PropertyName="Description" runat="server" />
However the original question is why is it that the OOTB control only displays the description for UserField and not for other types of field in a custom page layout, whereas it shows all descriptions in EditForm.aspx. I could do what you have suggested but
it's a lot of work as I have many fields and custom page layouts, and it seems to me that having the OOTB field control on the page should display the description for all field types not just user field types.

A table field is not showing.

PLS HELP. I am a newbie. I have 3 tables. The WA-PRODUCT field is not appearing. I am suppose to get "POLO" output but the result is blank. Please see the image below:
<a href="http://i150.photobucket.com/albums/s116/painkiller2007/23drt56g543g67hr/sap_table001.jpg">see image</a>
Please help. Thanks.
data: begin of WA,
 CUSTID like ZCUSTPROFILE-CUSTID,
 CUSTFNAME like ZCUSTPROFILE-CUSTFNAME,
 PRODUCTID like ZORDER-PRODUCTID,
 PRODUCT like ZPRODUCT-PRODNAME,
 end of WA.
data: ITAB like table of WA.
select ZC~CUSTID
 ZC~CUSTFNAME
 ZO~PRODUCTID
 ZP~PRODNAME
 from ( ( ZCUSTPROFILE as ZC
 inner join ZORDER as ZO on ZO~CUSTID = ZC~CUSTID
 inner join ZPRODUCT as ZP on ZO~PRODUCTID = ZP~PRODUCTID
 into corresponding fields of table ITAB
 where ZC~CUSTID = 3.
loop at ITAB into WA.
write: / WA-CUSTID, WA-CUSTFNAME, WA-PRODUCTID, WA-PRODUCT.
endloop.

data: begin of WA,
 CUSTID like ZCUSTPROFILE-CUSTID,
 CUSTFNAME like ZCUSTPROFILE-CUSTFNAME,
 PRODUCTID like ZORDER-PRODUCTID,
 PRODUCT like ZPRODUCT-PRODNAME,
 end of WA.
data: ITAB like table of WA.
select ZC~CUSTID
 ZC~CUSTFNAME
 ZO~PRODUCTID
 ZP~PRODNAME
 from ZCUSTPROFILE as ZC
 join ZORDER as ZO
 on ZOCUSTID = ZCCUSTID
 join ZPRODUCT as ZP
 on ZOPRODUCTID = ZPPRODUCTID
 into corresponding fields of table ITAB " < when u mentioned in the same order not need of corresponding .. this might be a peformance issue later
 where ZC~CUSTID = 3.
loop at ITAB into WA.
write: / WA-CUSTID, WA-CUSTFNAME, WA-PRODUCTID, WA-PRODUCT.
endloop.
check the data in the table.. do a manual verification first..

Field is not showing at transformations

Similar Messages

Maybe you are looking for