Field is there in extract structure but not in RSA6

Hi all,
second time i am asking the same question.
in tcode rsa6, when double click on extract structure i am able to see two fields for size. i have cross checked in tcode lbwe they are on left side only.But still i am not able to see those fields in rsa6.
i have replicated the datasource in bw.Under transfer rule i can those fields in comm. str., but i dont have info object to update the fields.
Please help me out....
regards,
Viren.

sorry if u have already given this info in last thread..
whats the BW version..and whats the datasource?
Vishvesh

Similar Messages

  • Fileds available in extract structure but not in Datasource.

    Dear All
    I n the extract structure BIW_MARC_S of 0MAT_PLANT_ATTR,  fields like reoder point, safty stock are available but these are not showing up in the data source 0MAT_PLANT_ATTR . How can I bring them in the data source...
    Thanks in advance
    Dinesh Sharma

    Hi Dinesh,
    I have the solution for this.
    Go to contents of the table ROOSFIELD in SE11, give your data source 0MAT_PLANT_ATTR. These steps are to be done in ECC. There you can find the fields of datasource. Trace for your field safety stock.
    Double click on that. you will get the details of that field. In that screen, the selection is shown as A, it means hidden.
    You have to change it either P or X in debug mode. Then the required field will be available for your datasource.
    Do revert in case of queries.
    Regards,
    Rama Murthy.

  • Error :Extract Structure does not exist for the table YFSP03A .

    Hi Could you please help me to solve the above mentioned problem?
    I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
    Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
                          So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01,  FAGLBW02.

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

  • "The extract structure is not permitted"

    Hi,
    I created a new datasource on R/3 system over a table Z*. Always works fine until I created a new append structure to enable load more data from new appended fields.
    The problem is that when I access to the datasource using tcode RSO2, I click on the save button and a error message is displayed below with the following text: "The extract structure is not permitted".
    I already activated the structure referred as the append extraction structure too. If i try to access to that structure by RSA6 tcode, i can do it, however the same it is not possible using RSO2.
    This only happens to the datasource created using a tabel Z*. I created too another datasource, but using a table standard and it works good.
    Can anyone, please, help me with this thread?
    Many thanks in advance.
    Kind regards,

    Hi Ravi, Vinay and Suman,
    Thanks a lot for your answers.
    Unfortunately, my question hasn't been solved yet.
    I have, correctly, assigned Ref tables and Ref fields for Currency /Quantity fields.
    This error message only happens when i add the append structure on the datasource. If i remove the append structure created, datasource works fine. So, this means that the problem is related with this append.
    I have another datasource created over a standard table and i added the same append structure with same fields and data elements, and i have no problems at all.
    This is happening only with this Z* datasource created over a Z* structure.
    Any more ideas, please?
    Many thanks!
    Kind regards,
    HT

  • How to restrict the user to change the project structure but not the documents?

    Hi,
    I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
    http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
    I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way  to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
    Thanks,
    Rutvik Uapdhyay. 

    Hi Rutvik,
    Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
    role  - SAP_SOLAR01_ALL
    this take care of objects in Solar01 like tab access etc
    role -SAP_SOL_KW_ALL
    this takes care of entire documentation within solman
    hope this helps
    Regards
    Prakhar

  • Can I Add all the fields from POOL to EXTRACT Structure in LBWE

    Dear Experts,
    Our Client is asking to add all the fields in the POOL Table to EXTRACT STRUCTURE in LBWE that is he wants to add all the fields from Right Hand Side Table to Left Hand Side Table in the Maintenance of LBWE of all the SD Data Sources. For few fields there is no data even though they are saying that in the nearer future we are going to use all most all fields.
    Like wise they are asking to add all the tables like VBAP, VBUP, VBAK, VBKD, VBUK, etc.,
    My Questions are:
    1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
    2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
    Regards,
    Sai Phani

    Hi Sai,
    1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
    we can add all the fields from the POOL to Extract Structure, if really your business requires to pull all the data.
    2.2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
    Ofcourse, there will be performance matters, because we have to extract maximum number fields data to BI side. If we have data for all the fields in R/3, we may face performance problems like load takes long time.
    Hope this helps.
    Veerendra.

  • Extract structure does not exist at the time of transport

    HI ,
    i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis  is
    Extract structure does not exist at the time of transport
    Long text of error message:
    Technical information about the message:
    Message class....... "RD"
    Number.............. 041
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    please provide the  solution asap

    Hi Bharath,
    Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
    After activation try to retransport.
    Regards,
    Durgesh.
    Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

  • PLIKZ field for COPA data source not there in Extract structure.

    Hello all,
    When I create a data source for COPA the PLIKZ field from the segment level is not maintained in the Extract structure and it is not replicated to BW also. But the other field GJHAR is maintained in the Extract structure which is also there in the segment level!!
    Clarify me why it is not available in extract structure? Also we are in 4.7 version and 3, 5 in BW.
    Points will be assigned!!!
    Thanks
    Ram

    Hello Friends,
    Could some one help me why the field PLIKZ is not available in the Extract structure when i create a COPA Data source?
    Need ur suggestions urgently!!!
    Helps please
    Thanks in advance once again

  • 0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

    Hi Friends,
    I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
    1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
    2) Code populated in SE19 (BADI for this Datasource)
    3) RSA3: Test extraction pulls the records for both the custom fields correctly.
    4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
    5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
    6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
    7) When load extracted into BW, data is blank for both the fields in PSA itself.
    Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
    Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
    Any of your replies will definitely help. Really appreciate your inputs.
    Thanks!!
    Prasith

    Hi Prasith ,
    After reading all the answers , what i feel we are  missing a major step ie  Re-initialization of the cube .
    As you changed the extract structure and added new fields and for this Data source i assume that deltas were  running already  , the BW  system cannot pull these new fields directly from ECC unless you have not done a  re-INit again .
    The Re-init is pretty simple and not as complex as LO.
    I would advise you to re-init for 01.2014 till 016.9999  , run full load and then delatas  will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
    But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
    Hope this helps !
    Let me know how it goes .
    Regards
    Zeenath

  • How to set fields contained in an input structure as not mandatory in WSDL

    Hi all,
    I hope someone can help me sort out a problem I've been having recently.
    I'm generating a WSDL from a function module, which has a structure as the only input parameter. This structure contains a number of fields, which need to be presented as not mandatory in the WSDL descriptor.
    I modified the function module by setting the structure and all its contained fields as not mandatory, but when I generate the related WSDL it shows the structure as optional and its subfields as mandatory.
    Below is a snippet of the WSDL:
    <xsd:element name="Zk4RfcTibcoFatt">
       <xsd:complexType>
          <xsd:sequence>
             <xsd:element name="XZk4Headprev" type="tns:Zk4Headprev" minOccurs="0" />       <-- optional structure
          </xsd:sequence>
      </xsd:complexType>
    </xsd:element>
    <xsd:complexType name="Zk4Headprev">
       <xsd:sequence>
          <xsd:element name="RecordType" type="n0:char4" />                                                    <-- non optional parameters
          <xsd:element name="IdricTecn" type="n0:char15" />
          <xsd:element name="IdricFour" type="n0:char15" />
          <xsd:element name="CodOperaz" type="n0:char4" />
       </xsd:sequence>
    </xsd:complexType>
    I can't understand why the stucture's elements are not defined as optional in the WSDL, while they're configured as optional in the function module definition. I'd expect a minOccurs="0" added to each structure's element definition.
    I even tried modifying manually the WSDL from SE80, but it seems it can't be altered in any way.
    Has anyone  a solution to this problem?
    Thanks in advance.
    Best Regards.

    I tried to do that, but I can't manage to edit the WSDL in SE80, is there a way to do it?
    I also tried modifying the WSDL in an external editor, but I can't find a way to switch the edited one with the original one in SAP.
    Can you please help me on that?
    Thanks in advance for any help you can give me.

  • Copy database structure but not the data

    I'm looking to create a new version of a database but with completely reloaded data - so I want to retain the database structure but none of the data.
    Is there an easy way (read: without a DBA on staff) to copy an existing database structure - preferably with views and stored procedures - and not take the data along for the ride?
    Thanks in advance for suggestions...!

    My mistake Judith.
    Using Object Explorer, [Right Click] on the database,
    Select [Tasks],
    Then [Generate Scripts...]
    On the first screen, check the 'Script all objects' checkbox.
    You can either save to a file or into a window. When the scripts are finished, go to the top and change the name of the database, then run the scripts.
    That 'should' get you what you want.

  • I downloaded music to my ipod (4th gen) from my computer but it was mp3 format.  It shows that the music is in there but I can not play it.  It seems to  be in there as a file but not as music.

    I downloaded music from my computer to my ipod (4th gen) but I can not listen to it. It shows that it is on there as files but not music is this because the music was format for a mp3.  How do I convert it to play on the ipod or move it to the music file?

    The iPod can play MP3 files, so that's not the problem.
    It sounds like you're accessing the iPod as a disk drive, and copying files in Windows Explorer.
    This is not the way to put music on your iPod. You have to install iTunes on your computer, and put your music in iTunes. Then you can use iTunes to select the music you want on your iPod.

  • In KSB1 one of the field is showing up in DEV but not in QA or PRD

    Hello,
    One of the standard field which is showing up in DEV but not in QA or PRD. After excuting a transaction KSB1, One can change the layout and add or hide a field from a given options. We can see that field in DEV, but not in QA and PRD.  This is a standard report and  we checked in table v_tkalv, it is same in DEV and QA
    Thanks for your help
    Rick

    I don't have access to a 6.0 system at the minute, but I'm pretty sure order isn't a standard field in KSB1.  It would be in KOB1, of course, but the K*B1 transactions are for displaying actual line items recorded on various kinds of cost objects.
    In the reporting scenario, how's the order factor in?  Did it receive statistical postings, or something?

  • Help! My outgoing mail has the image of pink lips in the upper right-hand corner.  I did not put it there; it is fun but not exactly professional!  How do I get rid of it?

    Please help!  My outgoing mail messages arrive with an icon of pink lips in the upper right-hand corner.  I have no idea how it got there.  This is cute but not really professional. Does anyone know how I can get rid of it?  Thanks!

    It's been almost three years since I bought and set up my most recent Mac but if I recall correctly .....
    When you initially set up your Mac, you were offered the opportunity to snap a photo of yourself in order to associate your photo with your user account on the computer. If you declined the photo I think the Mac will pick or suggest a picture from the preinstalled selections in the accounts pane of the system preferences. You can change the picture but you cannot delete it totally. That picture is part of your ID for that user account on the Mac.
    If you want to change it, Open System Preferences and click on accounts. Click on your account to change the picture. You will have to unlock the preference in the bottom left corner - and to do that - you need to enter your password. Click on the picture of the Eagle and then all of the preinstalled photo choices pop up in another window. Select another photo and then clcik the lock icon again when you are done.

  • Extract structure is not active

    hello.
    try to activate datasource
    0RF_ARTHIER_ACT
    and got a error
    "Extract structure /BI0/ARF_DS0100 is not active"
    what have i do to activate this structure...
    its seems not like 2lis_03_bf, where 03 is number of application...
    help plz.
    thank you!

    Hi..
    In R/3 first transfer Business content application hier and come to RSA 5 and activate the data sources...
    Bw
    On source sysyetm replicate the data source ....proir to that you should have installed/activated that data source in Business content..
    Hope this helps...
    Ram

Maybe you are looking for