Field KOMP-ZZPRCTR1 is not known for condition accesses"

Hello friends,
In a sales order if I put the material I got the error below.
"Field KOMP-ZZPRCTR1 is not known for condition accesses"
I am not able to incert that perticular material into sales order.
Kindly suggest how to go ahead.
Regards,
Kunal

Hi,
You need to add the new field  ZZPRCTR1 in the KOMP structure using SYSTEM MODIFICATIONS
Please check the system modifications for this
http://www.sap-img.com/sap-sd/add-a-field-to-new-condition-table-in-pricing.htm
regards,
santosh

Similar Messages

  • Field is not known for condition accesses - While save sales order

    Hi Gurus..............
    I am getting error while i save my own sales order that Field is not known for condition accesses. Then the screen automatically come to SAP Easy Access screen
    Pl let me know
    Thanks in advance

    Hi Selvi,
    try this way, once you enter the required data for the sales order go to item conditions screen. Click the analysis button and see the conditions determined. You would find some of the condition deriving a value and some may not. It will give details as to how the records either determined or whats missing to determine. Make analysis for the conditions that you feel should have got determined by going to VK13 if everything is correct. Else try maintaining with VK11. Now it would tell you if any field/ condition table is missing which was initially constructed as part of the access sequence for this conditino type.
    regards
    sadhu kishore

  • An entry in field Funds Ctr is not permitted for account 401000 Message no F5394

    Hi Friends,
    I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
    Please help on this..
    Thanks
    Goutam

    Hi,
    please check the message the error will give you the table number or Programme  name
    go to SE38  for programme and for table SM30
    system will show where is the exact error facing.
    thanks

  • BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

    I get this error message when testing my BADI in the MIGO Transaction.  The BADI is the MB_MIGO_BADI.  It is from the Line_modify method.  Here is the entrie message:
    BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
    Message no. MIGO050
    Diagnosis
    The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
    In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
    The field is defined correctly in the screen as an input/output field - so it does not relate to that.
    HELP!!!!!

    Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it.  The screen lets me put in data and it stays there up until it finishes the method line_modify.  The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
    Thanks! 
    Scott

  • Field property indicator is not ready for input in sap

    HI All,
    i am trying to post transaction in GJT1.
    i am getting below error "field property indicator is not ready for input"
    i tried taking different asset,
    now it is showing below error msg. please assist me on both the issues.
    "system status CRTD is active"

    I got the answer.
    using GJVV i was able to resolve my issue.

  • Requirements are not fulfilled for condition PI01

    Dear SD guru,
            When i create sales order,it prompt that 'Requirements are not fulfilled for condition PI01'.
              For the specifical requirement,i use the intercompany processing.I want two invoices in this sale document,onr for customer,the other for internal processing.So i need two condition types for two price,i use the condition type ZABC&PI01(for internal) in the pricing procedure.But,when i  create sales order under the configuration,it failed.
          How can i solve the problem?
    TKS!
    Edited by: stephen chow on Sep 8, 2008 9:35 AM

    We need to change the condition class from prices to other like discount or surcharge in the condition type.
    For ex: If it is shipment cost document got to goto T_06 select the required condition and change the condition class and do not select grouping conditions..
    Thanks,
    ratna
    Edited by: ratna edpi on Oct 24, 2008 6:04 PM.
    Edited by: ratna edpi on Oct 24, 2008 6:05 PM
    Edited by: ratna edpi on Oct 24, 2008 6:07 PM

  • Requirements not fullfilled for Condition type - Pricing Procedure

    When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

    Hi Sunil,
         Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is,  once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of  ABAP'er regarding this requirement if it is customized requirement.
    We should know the purpose of requirement in condition type.
    Venkat.

  • Requirements are not fulfilled for condition EDI1

    Hi Gurus,
    We are trying to add (EDI1 confirmed qty) in the PO item conditions.
    We are using the standard PO schema which has these condition type. It has no access sequence attached to it and hence it is a manual entry.
    If we try to add that condition type in the PO it throws me the following error :
    "Requirements are not fulfilled for condition EDI1
    Message no. V1215"
    Kindly let me know what I have to maintain at the earliest.
    Best Regards,
    Ravi.

    You incorrectly filling item information with condition value. All quotation related pricing need to pass QUOTATION_CONDITIONS_IN table paramete of BAPI.
    Try it and the problem get solved.
    Cheers
    Nilesh Shete

  • On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this?

    On my new iMac, mail has no sound after waking from sleep.  If I select do not wake for network access in general preferences, the problem does not occur.  Anyone have an idea on how to fix this? Thanks --

    Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

  • This field name is not known. for newly added fields

    dear sir,
    i ma using VS 2008 with CR.NET. There are previously dsigned reports. when I add some new Fields to the report, it prompts the error message
    [COMException (0x80041019): This field name is not known.
    Error in File C:\DOCUME1\TERESA1\ASPNET\LOCALS~1\Temp\PolicyReceipt {F0958318-C3D3-493D-9140-4CEA08B27B98}.rpt:
    Error in formula  <Address>.
    '{GetTransactionsForPolicyReceipt;1.ClientAddress_zh}+{GetTransactionsForPolicyReceipt;1.Address_zh_2}'
    This field name is not known.]
       CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
       CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +240
    here is the stored procedure
    select Transactions.TransactionID
                 , Transactions.PolicyDate
                 , Transactions.PolicyNumber
                 , ClientBranch.BranchName as ClientBranchName
                 , c.last_name + ', ' + c.other_name as ClientName
                 , c.last_name_zh + c.other_name_zh as ClientName_zh
                 , c.last_name as ClientLastName
                 , c.address as ClientAddress
                 , c.Address_2
                 , c.Address_3
                 , c.Address_4
                 , c.address_zh as ClientAddress_zh
                 , c.Address_zh_2
                 , c.Address_zh_3
                 , c.Address_zh_4
                 , c.email as ClientEmail
                 , c.[language]
                 , Gender.ShowName as ClientGenderName
                 , Gender.ShowName_zh as ClientGenderName_zh
                 , Institution.InstitutionName
                 , Product.ProductName
                 , FormulaType.FormulaTypeName
                 , Frequency.FrequencyName
                 , Frequency.FrequencyName_zh
                 , Frequency.FrequencyPeriod
                 , Frequency.IsLumpsum
                 , Currency.CurrencyName
                 , Currency.CurrencyName_zh
                 , Transactions.FrequencyPayment
                 , Transactions.Years
                 , Transactions.Terms
                 , Transactions.Remarks
    , c.Address_2
                 , c.Address_3
                 , c.Address_4
                 , c.Address_zh_2
                 , c.Address_zh_3
                 , c.Address_zh_4
    are newly added
    the other fields can be shown properly
    Edited by: tomckw on Oct 24, 2011 10:04 AM

    Only the RAS ( Report Application Server ) SDK includes API's to retrieve the version information. As you do not have full build of CR, you do not have the RAS SDK.
    Just as an FYI. The APIs are:
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MajorVersion
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MinorVersion
    A C# example code looks like this:
    MessageBox.Show("Report Version: " + (rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString()), "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
    I htink your only way to tell is to take the 10.2 report, add it to your VS2008 project and save. On save, if it says something like;
    "this report was crated ina precious version of CR"
    you know it is not 10.5.
    But I do not think that is your problem here...
    - Ludek

  • Mail sender adapter POP server not configured for URL access

    Hi Experts,
    I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
    _1. When I use pop://Fully qualified host name/
    _Error: exception caught during processing mail message; java.net.UnknownHostException
    _2. When I use pop://IP address of host/
    _Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
    I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
    Can someone please help.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

    Hi Shobhit
    Check with these notes:
    804102
    xi 3.0 mail adapter with pop3 user authentication problem
    810238
    XI 3.0 Mail Adapter for POP3 may not report some errors
    also check mailserver security settings ...
    Connection refused occures when XI cannot connect
    in most cases so try checking it again , maybe some ports are not opend on the firewall
    Thanks
    Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

  • Access not made for condition type

    we have a condition type ztax (Non Setoffable Tax) con. class as discount or surcharge. for this condition we created a access seq ztax having table one table with one field as tax code
    requirement is, if user enters tax code this condition type should come automatically in PO.
    in mek1, for different tax code we have maintained diff. tax %. but after entering the tax code, this condition type is not coming in PO.
    if i check in analysis, system says"access not made (initialized field).
    thanks
    manoj gupta

    hi sunitha
    yes i have assigned the access seq ztax to this condition type. what next?
    thanks & regards'
    manoj gupta

  • Fields from screen are not known by program.

    Hi All.
    I have this problem since I started using Dialog programming.
    Since I didn't attended any course I might be doing something wrong.
    When you define a field in a Dialog screen and you want to refer to it in the program that calls that screen you get a compilation error that there is no such field.
    If you define the field as at TABLE-FIELD you can work around this compilation issue by defining the TABLE using "tables: TABLE" statement, but now I have a problem since I don't want to use the TABLE-FIELD definition for my field and thus I'm stuck Shocked
    Any help will be appreciated.
    Ayal.

    Hai,
    If suppose, if you define a field in the screen, it is not mandatory to declare same variable in program level.  If we take the same name, after completion of PBO the data automatically transferred to the screen field. If u don't take the same name then you need to pass value of the variable to the screen field in the PBO.
    Example :
    If suppose, you have a I/O field in the screen with name TEXT.
    In the program
    data : text(10) type C.
    if that is 100 screen.
    Process before output.
    module display_100.
    with in this module
    text = 'SRIKANTH'.
    this will directly display on the screen.

  • Field Invest ID XINVE not visible for some companies

    Hello,
    In MIRO, for some company codes, the field "Invest ID" (XINVE) (or Indicator: Capital Goods Affected) is not visible
    Is there a customizing to change ?
    Thanks for help

    Solved
    Transaction OY01

  • Document-Type not known for scanned invoice

    Hi experts,
    I assign in OAWD a scanned document (Vendor Invoice) with "Storing for subsequent entry" to an user.
    Vendor Invoice is linked to TA F-43.
    The message appears in the Business Workplace SBWP. After executing a window appears "Process document type (Enter Document)" but without document type and TA F-43 will not be called.
    It looks like that the document lost the relation to document type and the transaction.
    Has anybody experience with this issue?
    Thank you in advance
    Martin

    Hi Martin,
    I suppose you did configure the OAC2, OAC3, SOA0 (BKPF-CREATE) and OACA - with parameter Transactioncode eq. F-43
    Now 1st try F-43 for your user in standard dialog mode. Working?
    Does the scanned image come up at after executing the workitem? (it should)
    Than the F-43 should be called. This has no other pre-set value. So FI document type (BLART) is not set in OAWD.
    How far do you get?
    Regards
    Tomas H

Maybe you are looking for