Field MATNR does not have a foreign key; as a result no intervals are allow

Hello,
We are having ROH and FERT material , in that we were entered the wrong Item category group , we need to change the
Item category group through mass posting through MM17. we are getting below given error
"Field MATNR does not have a foreign key; as a result no intervals are allowed"
Message no. M&132
Diagnosis
You have either specified an interval such as from 1 to 10 or M* for a field, or you have left the field blank, corresponding to the interval *. However, since there is no foreign key for this field, the system cannot resolve the interval into valid single values.
Procedure
Enter only single values for this field.
We have checked the the structure MPGD_MASS in SE11, and here foreign key mark is tciked in "entry help/ check.
How to solve this error.
Regards
sapman man

how did you then proceed, on the selection screen:
did you just use the change tab or did you work as well or only at the create tab?
What did you enter in the selection?
(...because I just tried a mass change without specying a material number and do not get such message)

Similar Messages

Error : Rowkey does not have any primary key attributes

Hello All,
I'm developing an ADF application which has a few ADF forms. The forms have VO's and some tables.
On running, I seem to be getting this error
<Error> <oracle.adfinternal.view.faces.model.binding.CurrencyRowKeySet> <BEA-000000> <ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@2ecf4f19.>
Where does the Rowkey have to be set? Is it in the VO?
Regards,
PP

Make sure that the VO's you use have at least one attribute selected as a key attribute. GO to View Object overview editor and select attributes tab, see whether there is at least one attribute marked as a key. If not select the most appropriate attribute from the list of fields and go to edit attribute dialog, tick the key attribute property.

SChannel error- The SSL server credential's certificate does not have a private key information property attached to it.

We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.

Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy

Loans document error Document header does not have a reconciliation key

Hi All,
I am trying to post a loans document through EK25 and while saving the document following erros is coming
Formal error: Document header does not have a reconciliation key
Message no. >0037
Diagnosis
You tried to post a document but a reconciliation key is missing from the document header. Since mass processing does not apply here (where the reconciliation key is automatically created) you must enter a reconciliation key.
System Response
Error message. Processing is terminated.
Procedure
Contact your system administrator.
Procedure for System Administration
If the program error occurred in an
SAP standard program, enter a problem message
Own program, correct the program
Any input appreciated.
Thanks,
VR

Hi,
You need to assign the reconcilation group to the SAP user ID you are using to post the loan document.
The reconciliation group is required if user-specific reconciliation keys are to be proposed automatically.
The reconciliation group is freely selectable.
Go to the following path in IMG-
IMG->Financial Accounting->Contract Accounts Receivable and Payable->Basic Functions->Postings and Documents->Document-.Define Default Values->Maintain Rules for Reconciliation Key Default Values->Maintain Reconciliation Groups for Default Values
Maintain the SAP User ID that you are using along with a reconciliation group.
After, you maintained the user ID and saved it, try to post the loan document again.
Hope it helps..
Thanks,
Amlan

AZURE The specified certificate could not be found in the LocalMachine certificate store,or the certificate does not have a private key.

Hello,
I try to make a HV website in Azure. It took me hours to figure out how to make a HV certificate with my own password. But I figured it out. With the HV application manager I uploaded the certificate to the HV platform. This worked fine. Then I created a
c# project with also works well on my local machine.
This is the code I use in the web.config
<appSettings>
<add key="ApplicationId" value="24ee15be-1497-4719-ad70-d1223adbf021" />
<add key="ShellUrl" value="https://account.healthvault-ppe.co.uk/" />
<add key="HealthServiceUrl" value="https://platform.healthvault-ppe.com/platform/" />

<add key="NonProductionActionUrlRedirectOverride" value="Redirect.aspx" />

<add key="WCPage_ActionHome" value="default.aspx" />
<add key="WCPage_ActionAppAuthSuccess" value="default.aspx" />
<add key="WCPage_ActionSignOut" value="SignedOut.aspx" />
</appSettings>
Next step is to deploy the site to Azure. I was able to upload the certicate to Azure.
After deploy I get the following error:
System.Security.SecurityException: The specified certificate, CN=WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021, could not be found
in the LocalMachine certificate store,or the certificate does not have a private key.
I checked the certificate on another server with a different key in the web.config
<add key="ApplicationCertificateFileName" value="c:\Zodos\website\WildcatApp-24ee15be-1497-4719-ad70-d1223adbf021.pfx"/>
This gives me this error:
Exception Details: System.Security.Cryptography.CryptographicException: The specified network password is
not correct.
So the procedure I followed definitely was not correct:
It works on my local machine
It doesn't work on another server or on Azure
I can see that the procedure I follow is not correct, but what am I doing wrong?
Wilfred

I am having the same problem. I see I have updates thru the Mac App Store but when I try and run the System updates in the Mac App Store it errors out. But I can update third party apps.
Have even tried going thru Terminal to check for software updates but still have same error claiming it can not find the hostname server.
Jefre

Workflow Manager Configuration - Certificate with Thumbprint does not have a private key

After following the video series on how to install and Configure Workflow Manager into SharePoint 2013 http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx,
I get to the 'Configure Certificates' section in the Workflow Manager Configuration: I browse to our wildcard certificate and select it.
When I try to move to the next page of the configuration wizard, I get the following red error under the certificate:
Certificate with thumbprint LONG STRING does not have a private key.
I checked the properties of the certificate, and it says: You have a private key that corresponds to this certificate.
What am I missing??
Thank you.
macrel

Hi,
According to your post, my understanding is that you got error under the certificate.
Please make sure you configure the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Installing and Configuring Workflow Manager 1.0
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting ADFv: Rowkey does not have any primary key attributes

Hi
I am using 11.1.1.5.0 version of JDeveloper.
The ViewObject has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key and
the EntityObject also has DistaccountId,OperatingUnit,PricingCategoryId,PartyId as Primary Key
and my Table also has the same set of attributes(DistaccountId,OperatingUnit,PricingCategoryId,PartyId) as Primary Key .
I am getting the following error on Create,Update Operation -
"<CurrencyRowKeySet> <_computeCurrentRowKey> ADFv: Rowkey does not have any primary key attributes. Rowkey: oracle.jbo.Key[], table: oracle.jbo.server.ViewObjectImpl@6c41af."
Also,when i choose a row for Update operation,the pop-up that opens up holds the values for some other record.
Please suggest.

I'm not too sure but can you check if you have the following text in your page source ?
selectedRowKeys="#{bindings.<TreeBindingName>.collectionModel.selectedRow}"
selectionListener="#{bindings.<TreeBindingName>.collectionModel.makeCurrent}"

Power Mac (MDD), New Apple keyboard does not have an Eject key

Newbie question...I picked up an Apple keyboard for an IMAC that does not have the open door key. Is there a combination of keys I can use to open the doors on my G4 MDD? My reqular keyboard, with the open door key, opens the doors fine.
Thanks in advance,
Frank
Message was edited by: frankmojz

Hi-
Welcome to Discussions!
Open System/Library/Core Services/Menu Extras. Double click on "Eject.menu", an icon will appear, and you can eject and close the drive from your menu bar.
If you hold the F12 key for 2-3 seconds, the drive tray door will also open and close.

Does Berkeley DB Support Foreign key access?

BDB Java Editon supports.
But in BDB I cant find similar APIs.

Hi Liu,
The Java Collections API in Berkeley DB does not offer the foreign key functionality as the Java Collections API in Berkeley DB Java Edition. You'll have to maintain the integrity constraint imposed by a foreign key yourself through the application code.
Regards,
Andrei

I'f ITunes does not have a particular song

I have had very good luck with purchases from I Tunes, songs real clean without distortion. Can someone recommend another good music source for when ITunes does not have a particular song? Thanks

It depends what you are looking for. Amazon.com has an excellent selection of major label and independent music. Unlike iTunes, the amazon selection is at 256 K and is 100% non-DRM, so it makes sense to look there before iTunes.
Audiolunchbox.com and emusic.com specialize in independent labels and each have millions of tracks. Also there are literally hundreds of online stores that cater to particular styles and markets; a few I have successfully used are eclassical.com (classical) beatport.com (DJ music).

HT4623 my ipod does not have a software update bit in the general area how do i update it now?

how do i upate my ipod when it does not have a soft ware update bit in the general area?

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
- A 2G to 4.2.1. Requires iTunes version 1o or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.3 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models

VLD-0203: Foreign key ENC_COLLECTION_TYPES_1 does not have a referenced col

When I try to deploy a source table a got the error.
VLD-0203: Foreign key ENC_COLLECTION_TYPES_1 does not have a referenced column.
All foreign keys must have referenced columns. Complete the foreign key definition by referencing a column
How can I fix this issue ??

Hi,
Just refer to the correct column for the FK created (you need to have a parent table available/deployed first before this is deployed). Since you are deploying the source table which will create the same in DB you have to make sure the keys are set correctly and the parent table is already available in DB.
We generally create the tables first in DB and then use the import functionality to bring it into OWB repository.
Regards,
Bharadwaj Hari

Cmp-field of type 'java.lang.Long' does not have a no-arg constructor

Hi,
I am a newer of Oracle9i JDeveloper and I am learning it by "Oracle9i JDeveloper Reviewers Guide". I did the sample as the guideline in "Oracle9i JDeveloper Reviewers Guide". But when I tried to run the sample I made, the error : "cmp-field of type 'java.lang.Long' does not have a no-arg constructor which is needed for properties/fields based mapping" was appeared.
Any one know how to correct it?
Thanks in advance.
Best Regards,
Double
Auto-deploying file:/E:/JDev9i/jdev/Workspace2/J2EE/classes/ (No previous deployment found)...
Error compiling E:\JDev9i\jdev\Workspace2\J2EE\classes: cmp-field of type 'java.lang.Long' does not have a no-arg constructor which is needed for properties/fields based mapping
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized

I'm getting the same thing. The message doesn't indicate which of the four beans I have that use type Long is encountering this. I suspect that since it says 'constructor' it is one of the two which uses an Long for a primary key.
Yet another OC4J bug,
Michael A. Moran

Data Object does not have a component called MATNR

Hi Everyone,
I am battling with a small program for 2 days as to why any output is not getting on to the list.
On CHECK, the error being shown is the
'THE DATA OBJECT "WA_ITAB" DOES NOT HAVE A COMPONENT CALLED "MATNR".
Report ZTR_REP1.
tables:mara.
select-options:s_matnr for mara-matnr.
types:begin of itab,
        matnr like mara-matnr,
        ersda like mara-ersda,
        ernam like mara-ernam,
       ekgrp like marc-ekgrp,
      end of itab.
data: wa_itab like itab,
      itab1 like itab occurs 0 .
select matnr ersda ernam
       from mara
       into wa_itab
       where matnr in s_matnr.
append wa_itab to itab1.
loop at itab1 into wa_itab.
    write:/ wa_itab-matnr,
endloop.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:34 PM

Hi Ranjith,
Use this code it will work fine:
tables: mara.
select-options : s_matnr for mara-matnr.
types: begin of itab,
matnr like mara-matnr,
ersda like mara-ersda,
ernam like mara-ernam,
ekgrp like marc-ekgrp,
end of itab.
data: wa_itab type itab,
itab1 like itab occurs 0 .
select matnr ersda ernam
from mara
into corresponding fields of wa_itab
where matnr in s_matnr.
append wa_itab to itab1.
Endselect.
loop at itab1 into wa_itab.
write:/ wa_itab-matnr.
endloop.
<REMOVED BY MODERATOR>
Regards
Hemant Khemani
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:35 PM

OBIEE 11g: Fact table does not have a properly defined primary key

Hi,
We have two fact tables and two dimension tables.
We have joined the tables like
D1-->F1
D2-->F2
D1-->D2
We dont have any hieracies.
It is throwing error in consistency check,
[nQSError: 15001] Could not load navigation space for subject area ABC.
[nQSError: 15033] Logical table Fact1 does not have a properly defined primary key.
It is not like STAR Schema, its like snowflake schema. How to define primary key for fact table.
Thanks.

Hi,
My suggestion would be bring both the facts to the same logical table sources and have a single fact table in the BMM layer joined with multiple dimensions.
Build a dimension hierarchy for the dimensions and then in the content logical layer mapping, map the dimensions to the fact tables with detailed level/Total
Refer the below link-
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
Hope this help's
Thanks,
Satya

Field MATNR does not have a foreign key; as a result no intervals are allow

Similar Messages

Maybe you are looking for