Field Name - Number on Activity overview screen

Hi Friends
Would appreciate if some one could let me know and clarify - field name "<b>NUMBER"</b> - Is this filed meant for assigning required <b>"Number of Persons"</b> to perform a assigned internal acivity in a work center?. 
Looking forward to hear and would assign reward points suitably.
Thanks
Sudhakar

Hi Sudhakar ,
Generally I would not recommend you to use this field, if it is not really needed. Without this field, you can reach other functionalities as well.
This field is normally used with the 'calcualtion key'  together, which enable the user 'calculate the duration\works' based on the works\duration and the number of capacity. For example, if you duplicate the number of capacities,  the duration will be reduced to 50 percent.  It sounds fine, but from my point of view, it is less flexible.
Without the number of capacities, you can  assign multiple persons to the activity too.  It is not the prerequsite for the person assignments.
If you would like to assign the persons to activity, the HR master data has to be maintaned. I think, the info. type 001, 002, 007 and 035 are important.
The note 543362 should give you more information.
My suggestion: keep it as simple as possible in this area.
Please rewards poinits, if it is useful.
Kind regards,
Zhenbo

Similar Messages

  • Adding a tab on to Activity Overview Screen in CJ20N

    Hi Experts,
    I have to add a new tab may be called as ' PRICING' on activity overview screen right next to Purch. TAB
    Basically, when we select an activity in CJ20N and click on material component, where we actually put in the material number, requirment quantity, item category , there we have two TABs ( TOTAL and PURCH.) .
    Next to purchase I need to add a new tab , which will pick up the price of material from sales order line item automatically.
    Please suggest me, how to achieve this.
    Thanks,
    DHRUV

    have patience mate, usually weekends just fly by . . . .
    anyway you cannot add another tab there - there is an exit CNEX0009 but I am not sure if you can add tabs
    if you want the sales order value from procong tables then I suggest thet you use CNEX0008 to add a field on the activity and then use CNEX0009 to check etc . . .
    hope that helps

  • How to display fields in IT0002 to PA30 overview screen for IT0024(Qualifi)

    Hi,
    I have a requirement where I want to display two fields NACHN and VORNA on PA30 overview screen for IT0024(Qualifcations).
    How can I achieve this?
    Thanks,
    Ameet

    Hi,
    There is no harm in enhancing IT0024 using PM01. However, these two fields added to P0024 using Customizing Include, happen to be display only fields over the overview screen of PA30 for IT0024.
    Now to write a query in PBO of generated module pools after clicking on the button labled Generate Objects, how to take care of delimited records in both infotypes.
    Thanks,
    Ameet

  • Add a field VBAP-MTVFP (availabilty check grp)to VA01/02/03 overview screen

    Hi,
    I want to add the field VBAP-MVTFP to the overview screen of Sales Order--> tcodes VA01/02/03.
    I came to know that this can be done by adding the field name in TCVIEW table but I am unable to see the field on the layout even upon doing so.
    Could someone please help?

    Hi,
    Append the table VBAP with the field you wanted to display at additional data A or B, and then write the code in sales order user exit to populate the field value.
    try user exit "USEREXIT_MOVE_FIELD_TO_VBAP" under include MV45AFZZ.
    regards
    Vivek.

  • Additional Fields of an infotype in a overview screen??

    Dear Alls,
    I have a question. I m using recruitment module, i have added field in previous employment infotype 0023 but i want to maintain multiple data in this infotype. but this addiotional field is not diaplay in overview screen while it is in infotype.
    Kindly let me know is there any provision to add addtional fields in overviwe screen of an infotype.
    Thanks & Regards
    Sehrish

    Hi Sehrish,
    Ask your ABAP consultant to change the layout of the screen and as the last salary is a custom field so this must be added to that particular screen number otherwise it will not be displayed as this is not standard field. First check for the program and the screen number then as a prerequisite add the custom filed last salary to the table & structure PA0023 & P0023 and the same must be made available while creation of an infotype 0023 in PA30.
    And the screen which you are referring in the screen shot attached is a Enter additional data action screen in Recruitment module and its not an overview screen of an infotype.
    Regards,
    Mithun K

  • IT0001 Overview screen

    Hello all,
    I would like to know if we can add the fields in the list on Overview screen of IT0001. I could not see End Date and PSA fields there.
    Thanks.

    Yes you can do that
    Follow the below steps
    1. Go to the list screen of IT 0001 and find the program name and screen number from SYSTEMS- STATUS
    2. go to sm30 t code and use V_T588M table
    3. Give the program name and find the screen number
    4. You will see what all fields are displayed as of now
    5. Make visible the fileds which are missing in your case
    Cheers
    Ajay

  • Display description in Overview screens

    I am currently working on the Overview Screens for Personal Data, Address etc., and need your inputs on below:
    1. how to display the "description" instead of codes/key for the fields like Preferred language(dropdown), Gender (radio button), State (dropdown) on the Overview Screens in the respective applications.
    2. is there a best practice to show a generic error message when the screen is locker by a user ? please share the details.
    3. how to display the values of from different fields like communication type, area code and telephone number on the Overview screen. for ex: Communication Type 1: CELL 123-4567890
    Version: EHP3
    Appreciate your inputs.
    Thanks,
    Amar Challa

    Amar,
    For requirements 1 and 3 you need to change the webdynpro for java code and you need NWDI for that.
    for requirement 2 you cannot have control for displaying custom message because it is webdynpro for java code
    Thanks
    Bala Duvvuri

  • Inspect and Inspected field in Record Results:Characteristic overview

    hi,
          Can any one explain me the Inspect and Inspected field in Record Results:Characteristic overview screen. How the sample size is determined in Inspected field during lot creation.
    Muthamil

    Dear Muthamil
    This fully depends on the sampling procedure you choose. for eg if you choose 100% sampling procedure and you have lot quantity of 10 items
    Then inspect will be 10 and inspected will be 10.
    SAP gives the definition for INSPECT as  - Predefined sample size that has to be inspected for an inspection characteristic or a partial sample.
    For each inspection plan characteristic you define the amount by which the inspected sample size in the 'Insp.ed' field can deviate from the to-be-inspected sample size in the 'Inspect' field. If a characteristic (partial sample ) is closed the system checks whether the required sample size is adhered to. The characteristic (partial sample) can only be closed if this is the case.
    But for Scope not fixed, larger , smaller scope the inspected field chages based on the result recording
    SAP gives the definition for INSPECTED as   - Number of sample units that have been inspected for a characteristic or a partial sample.
    Hope this explains
    Regards
    Gajesh

  • How to translate field names in SAP R/3 (SE63)?

    Hi gurus,
    I actually have an unsolved with my translation job in SAP R/3. It's urgent and I just can't find a solution for that:
    I'm using the translation menu with transaction SE63.
    Though I have translated the object types domain (DOM), data elements (DTEL) and table descriptions (TABT), I get no translated field name (e.g. in selection screens for summary tables).
    Which object type do I have to translate? Or is there another SAP transaction or a table where I can translate the field names?
    Thank you for answering!
    Best regards
    T. Duong

    Dear T. Duong,
    In SE63 -> Repository Texts.
    Also, visit Note 585116.
    WebAs Support Package 25 converts the SAP translation environment (SE63) to a Unicode-enabled version for short text translation. This conversion requires some system adjustments before translation can continue.
    If you never translated in your system before Support Package 25 was imported, you can simply ignore this note because your system does not contain any translation data that needs converting.
    Please download the current documentation attached to this note:
    Choose file UC-SE63_DE.PDF or UC-SE63_EN.PDF if you want to read the end user documentation.
    Choose file UC-TransAdmin-DE.PDF or UC-TransAdmin-EN.PDF if you want to learn more about translation system setup and coordination.
    If your system does not yet run on a Unicode basis, you must make the
    technical adjustments described on the first page of the documentation.
    If yours is already a Unicode system, create an OSS message and assign it to the component BC-DOC-TTL.
    Should you have to translate from a Business Warehouse (BW) environment, please refer to the Quick Guide to generating worklists in transaction SLWB attached to this note (files QuickGuideTransAdmin-DE.PDF or QuickGuideTransAdmin-EN.PDF).
    Regards,
    Naveen.

  • Problem with table maintenance generator overview screen

    I added a field in a custom table and then used table maintenance generator to regenerate the table maintenance screen.
    I used 2 step to generate. The problem that I have is the field not displayed in the overview screen though it is visible in the single screen ( ie the second screen).
    I am not sure where the problem is as the field is not visible at all in the table control of overview screen.
    Please help me on this as to what could be the problem.

    Usually it is enough to regenerate both screens and the modules, but sometimes it doesn't pick up all the changes. In that case just delete the maintenance dialog and recreate it. That should do it.
    Regards,
    Michael

  • E-recruiting: changing overview screens in the candidate profile

    Hi,
    I have used customer include CI_P5104 to introduce two new fields on the Candidate education BSP. These have appeared ok. I also want these new fields to appear on the overview screen of the candidate's education but the columns on the bsp 'education_overview.bsp' appear to be hardcoded. Does anyone know how this overview can be controlled. I can't find anywhere in configuration. Does it require a customer version of the BSP?
    Also, I have hidden the field 'Highest degree/certificate' through flexibilization but this continues to appear on the overview screen of the education element in the candidate profile wizard. Can this be controlled without development work on the BSP?
    Any help appreciated

    Hi Priya,
    I am already using flexibilisation with a context and successfully generating the URLs. The overview I am talking about is not the smartform/pdf overviews but the overview of the records which are maintained in the education infotype record. If fields are hidden using flexibilisation they are correctly suppressed on infotype 5104. As the candidate maintains their education history the records are built up on the infotype. This is the overview I am referring to. The fields which are hidden during flexibilisation do not seem to be hidden from this view even though URLs are regenerated with the correct context.
    Thanks,
    Jim

  • Screen field name

    Hi friend,
    In MB01, after giving the PO number and when the 'Adopt+Details' button is pressed, a new screen opens, in which there is a field 'Reference Doc'.
    My doubts on this field are as follows:
    1.  How to find out the screen field name for that field.
    2.  How to give a if condition for that field.
    Pls guide me.
    Regards,
    Mark K

    Hi Friends,
    Through F1, I am getting the field details as following :
       Program name   = SAPMM07M
       Screen no.     = 0210
       Screen field   = MSEG-LFBNR
       The value displayed in the field is '501809447'.
    Now I want to pass this field value to a variable.  How could I do this.
    Can you pls guide me.
    Regards,

  • VBAP append structure field on Overview screen 4900

    Hi,
    I have created an append structure on VBAP with a ZZ field and have included this field on the table control in the overview (sub)screen 4900 in SAPMV45A. 
    I have put the field in a number of the PAI CHAIN statements, but whenever I enter a value in the field and hit Enter, the value disappears.
    Does anyone have a definitive list of places that I need to change code to stop the field contents dissappearing?
    Many thanks,
    Andrew

    Hi - I have the issue of presenting ZZ fields from VBAP in the Item overview screen 4900. From your conversation I cannot see any solution to your similar issue. Did you do modifcations or is there a SAP way to include ZZ fileds in the 4900 screen?
    Please respond.
    Best regards Steen Pedersen

  • Create Limit Item Screen Fields name

    Hi Experts,
    I am unable to find the below screen field names. Can please let me know the Below screen fields of Create limit item in SRM Shoping Cart.
    Service Agent (Input filed)
    Account assignment.(Radio button Unknown and Known)
    Thanks in Advance

    Hello,
    If you go to SE80 transaction, type the BBP_SC_UI_ITS as Function Group, you can choose the screen number 210.
    If you click on "Layout" button, you will se the same shopping cart limit page. If you click on the desired fields, you can see their names, as below:
    Service Agent:
    GS_SCR_LIMIT-WORKER_ID, which is linked to GS_SCR_LIMIT-WORKER_NAME and GS_SCR_LIMIT-WORKER_GUID
    Unknown radio button:
    GS_SCR_LIMIT-ACC_UNKNOWN
    Best regards,
    Ricardo

  • LDB  PNP, selection screen, org structure field name ?

    Hi,
    Generally, what are the names of the additional selection-screen fields? There are twenty odds pnp...., the standard ones. But what is the name of the org. structure, the 4th button selection options group fiels? (I need ids of all Org units from org. structure subtree, or the root org id at least)
    Thanks,
    Piotr

    ...this it is with headerline...
    Sergey big spasiba
    Piotr

Maybe you are looking for