Field not delivered by source system - Deleted from rule

Dear Support,
While activating business content for example 0CRM_COMP,
I get the following error:
Field TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPETX not delivered by source system -> Deleted from rule
Similar errors for different fields appear.
My system config is
BI 7.0, SP14
BI Cont 703 Sp6
Any fix or solution will be suitable awarded.
Thanks and Regards
Raj Jain

HI Raj,
The business Content is not always consistent.
If you get messages like that, the best way to deal with them is to manually adjust the objects.
In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
Hope this helps,
Udo

Similar Messages

Transport Error - DS does not exist in Source system

Dear All,
I am getting below Error while transporting the DSO from DEV to Quality.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A.
I have checked the dataosource is active and available in Development system. But Its giving error while importing.
As per the dataflow the data of this DSO is updated to Cube.
Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
Regards
Sankar

Hi,
Your right I am transporting ZM_ALT Dso . The following log of the error we are getting.
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
Regards
Sankar

BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth

Info Source 80FIGL_O06 is not defined in source system

Hi BW Experts,
When I am trying load data from ODS to Cube, I am getting a error messgae stating:
Info Source 80FIGL_O06 is not defined in source system
Error in Source system
This is an urgent issue. Please let me know if you have any suggestions...
Regards,
Reddy.

You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
Did you follow the above steps? Where exactly is your problem?

Infosource is not defined in source system.

Hello Expert,
We have problem on data upload. The Infosource is ODS object generated. Now through RSMO, message is:
Infosource 8* is not defined in source system.
How to re-define/active this type infosource? Is there any impacts?
BTW, days ago, it ran very well.
Thanks
XY
Edited by: xy chen on Nov 14, 2008 11:47 AM

Hi,
I am also facing the similar error, whne uploading data from an ODS to further data targets.
I did follow th instructions advised, and I tried searching in the Service Market Place with the term,
" " Infosource is not defined in source system " " but couldnot find any correction notes.
Could you let me know the notes, you followed up to resolve this issue,
Thanks in advance,
Cheers,
Neela

DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5, activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
Can anybody help me who has faced similar issue.
Regards,
Neil

Hi Niel,
Could you chek the RFC Connection of particular client.
Thanks,
Ram

DataSource ***** does not exist in source system ***** of version A

dear masters,
i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
pls help me how to overcome this problem.... where i m missing which setttings...
regards,
vicky

Hi Vicky,
Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
Now Change and activate the data source again.
Both the status and version should be activated green.
Also you can use the check button to check the DS.
Thanks,
Naween

Copy Source System Parameters from 1 container to another DAC 10

Hi ALL
I want to copy the records in the tab source system parameters from 1 container to another, i only want the source system parameters, anybod have any idea, I was thinking of copying them directly in SQL, was not sure where though, Thanks

Go to your custom container at Source system parameters tab
right click->Reference->Select the container->add required one
If helps pls mark as correct/helpful
BTW: for DAC experts send me an email
Edited by: Srini VEERAVALLI on Dec 19, 2012 4:40 PM

DataSource 80SD_O03 does not exist in source system of version A

Hi,
While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
Regards,
Devi.

Hi,
Hope you followed the same in R/3
Datasource: Rsa5->RSA6
BI Side:
Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
And same procedure for Infoprovider too.
Please analyze closely about the procedure, some where you are missing something.
Regards,
Suman

Hi I bought 2TB WD my passport for mac but I do not know what I can delete from the original macbook air. Thank you.

Hi I bought 2TB WD my passport for mac but I do not know what I can delete from the original macbook air. Thank you.

That depends on what you have on the MBA...if you have videos, move the videos to the external drive. If you have a lot of music, create a folder/library for the music and point iTunes there for the music. If you have a lot of photos for iPhoto, make a new library on the external drive and move our photos over there and then select that library as the default library for iPhoto to use.
Those are the big files and should take a lot of the load off the internal storage.

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

Deleted email messages on the iphone not realizing it would also delete from my mac computer mail. how can I retrieve ? Help!

Deleted emails from my iphone not realizing it would also delete from my mac email. How can I retrieve the messages and get them back on my computer?

Did you have time machine set up? Maybe you can retrieve them from a backup.
Oh... and if your mail provider is someone like Google, They may be sitting in your all mail folder on the server.

Recover from source system deletion

Hi experts,
Our source system assignment to ECC was accidentally deleted which subsequently deleted the transfer stuctures/rules. Apart from restoring from backup, how can we recover the transfer rules? We could manually assign the source system again but there too many to be performed as well as we could not possibly recall all the routines, formulas and infoobject mapping.
Assistance is greatly appreciated.
Thanks!
ismail

Hi Arun,
Re-transport from QA is one of the options and our Basis is recommending that as well. Our options in order of preference is as follows:
1) Restore from backup
2) Re-transport from QA
3) Manually re-create
Thanks for your thoughts.
ismail

Source systems vanishes from RSA1 after renaming of the LSN after BDLS

Dear BW/BI Experts,
           We are doing BW3.1 upgarde to BI7.0........After system copy there is need of rename of logical system for BP1 to BD1 (Prod. to Dev. and Dev. is our new Target BW system ) and From RP1 to RQ1. Before renaming I checked that all source systems were there in RSA1 i.e. Myself BW system , RP1 source system and Flat file source system as per SAP HOW TO ....System Copy in SAP Business Intelligence Systems Landscapes document. (almost 16 steps)
        But after running renaming program by BDLS , I saw source systems are vanished from RSA1..........and now I am trying to create source systems manually.........system is not allowing the same...........pl suggest...........waiting for your experts opinion......pl help urgently as I am in problem fromn last many days and did system copy more than 2 times considering that there may be system copy problem.......
While RQ1CLNT100 creation i.e.Source system ....I am getting follwoing error.........
Entry in outbound table already exists
Message no. E0404
Diagnosis
A partner profile (outbound paramters) could be found using the following key:
/RQ1CLNT100/LS//RSRQST////
This relates to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST    Test indicator
Procedure
Please check the EDI partner profiles.
and also following error after activation..........
Entry in inbound table not found     E0
Entry in inbound table not found     E0
The BW IDoc type ZSBA014 is not the same as the source system IDoc type ZSBC044     RSAR
The following errors occurred in the source system:     RSAR
Incorrect IDoc type ZSBA005 in the ALE definition of the source system     RSAR
Best Regards,
Sharad

Hi Sharad,
This is a very Basis-oriented task,
can your BD1 system can communicate with your peer ECC/R3 deveopment? you might need to run sm59 to ensure your RFC connection with ECC/R3 deveopment is communicating without problem.
once the RFC is ok, if you are familiar with WE20 and WE21 transactions, these transaction will configure IDoc setting (basis level) where you BI system will talk to, i believe IDoc are using old information copied from BP1 is still pointing to your ECC/R3 productive system at IDoc level. you will need to have Basis guy to help you out. please let me know if you need help on WE20 and 21, if you do, you need to provide me your current settings in BD1 and the peer ECC/R3 development setting as well.
cheers

BDLS is not converting DataSource source systems

After running BDLS on our BW system to convert from logical system DV1220 to ED2CLNT220 we found that the source system assignments for our datasources are not getting converted. Specifically table RSISOSMAP which holds the mapping between the infosource and the OLTP system. We did check several of our ODS's and Info-cubes and the logical system were changed from DV1220 to ED2CLNT220.
Any help would be appreciated.
Regards,
Mike...

Mike,
After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
Refer to the below doc for detail. Also refer to note 886102.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
Below note talks about similar issue.
How to change all infosources to the new source system automatically
Hope this helps.

Field not delivered by source system - Deleted from rule

Similar Messages

Maybe you are looking for