Field Point 4.0.1 will not load LabView Drivers

When I load Field Point 4.0.1, it does not load the LabView Feild Point VIs.

Dusty,
What version of LabVIEW are you using? FieldPoint 4.0.1 came out before LabVIEW 7.1, so it will not recognize a LabVIEW 7.1 installation. Likewise, FieldPoint will not support LabVIEW versions that are too old. You can over-ride the installation parameters by running a custom installation of FieldPoint 4.0.1 and choosing the LabVIEW installation that you want. Please note that if your version of LabVIEW is older than supported, the VI's will not work. If you have LabVIEW 7.1, the VI's should work but you will miss out on some of the FieldPoint 4.1 functionality for LabVIEW 7.1.
Regards,
Aaron

Similar Messages

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • Firefox will not load pictures, videos or more than one tab at a time. Help!

    Hi there,
    I have reinstalled Firefox 3.6 a few times, but it doesn't seem to fix the problem. When I try and load a site with pictures, videos (such as YouTube, but including a blog post with pictures), or more than one tab at a time, I just get "Untitled" tabs that don't even register the address. This happens especially when clicking to open a link in a new tab from a Google Reader.
    At this point too, a lot of pages will not load correctly; even Firefox Help as it turns out!

    Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
    Firefox 4 is not supported, but firefox 3.6 is
    * see [[installing a previous version of firefox]]
    There is a change to a preference which may help, post back with more details of your problems please.

  • Firmware will not load on Zen To

    I just purchased a Zen Touch and I tried to upgrade the firmware to the 2...0 latest version. (You would think that Creative would ship new units with latest firmware, but they do not. Pretty lame). So?I downloaded the?latest firmware?to my desktop and ran it. When asked, I plugged in my Zen via the USB cable (in the rear of the computer/not front) and the firmware started to run. It then stalled and the Zen went into recovery mode and got stuck. I waited 0 minutes and nothing happened. I contacted Creative Service (did you know that they are located in Singapore?) and I explained the problem. We then spent an hour on the phone and did the following: () confirmed in device manager that the Zen is being recognized which it is, (2) reloaded the drivers, (3) uninstalled and reinstalled the CD software, (4) went into the registry and edited the USB settings as explained in the knowledge base to allow all users, (5) rebooted the computer, (6) redownloaded both firmware versions from the Creative download site, (7) tried re-running the firmware update. Even though the Zen is recognized in the device manager and it is shown on the desktop tray, firmware will not load and device will not sync and firmware update on desktop says that the device is not connected. Creative support then told me that the Zen was defecti've and to return it--which I did. I got a new one and the exact same problem occured. What is also interesting is that while the Zen Touch is a 40 gig player, but when I open it up (yes, I can even view the Zen dri've on the desktop and reformat it, which I did), the dri've reads as only having 20 megs instead of 40 gigs--which makes no sense to me.
    Creative clearly has a serious bug issue to resolve. My computer is running on a P4 with Windows XP, with SP2. If anyone can solve this one, Creative should send them a free player and hire them. Please reply only if you are super knoweldgeable as I have wasted too much time and I am ready to pack this unit up and buy an I-Pod at this point. Thanks!Message Edited by randelcole on 2-02-200607:09 AM

    This forum is for the Shockwave Player - the plugin for running Adobe Director files in a browser. You need a forum for the Flash Player - the Shockwave Flash plugin. Blame Macromedia for confusing the name space of the 2 separate and distinct plugins

  • Photo will not load

    I received a photo that will not load. It keeps spinning and I can't stop it. How can I delete it/stop it? I have a Samsung Galaxy 4

    There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance.

  • Firefox will not load to the web, even after 2nd download.

    I have used firefox as a web browser because our school page works best with it. I have used firefox for over three months. This weekend firefox will not load. The screen message says unable to load web page, try again button is displayed, all to no avail.

    I have XP Pro. I tried installing 3.6.15 and could not open it. I did a system restore and 3.6.14 would no longer open. I tried again installing 3.6.15 and got a message that the previous version had not uninstalled properly. Tried uninstalling.
    As a precaution I used MozBackup to save my bookmarks etc. and also saved a system restore point.
    I then clicked Start, My Computer, drive C, Program Files and deleted the Firefox folder.
    I installed 3.6.15 and it is now working fine with all my bookmarks and addons loaded automatically.

  • Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try.

    Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try. The tab will show the website destination in the navigation bar, but will not automatically load it; I have to press the load button in the navigation bar instead of it instantly loading.
    == This happened ==
    Every time Firefox opened
    == The newest version, 3.6.6, of Firefox was downloaded

    It's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
    It happens so randomly that I don't know how to pin-point what it could be.

  • Webpages will not load correctly on any browser

    Hey all,
    About 3 weeks ago I took the leap and upgraded my works PC from Windows 8 to 8.1 (as a test before doing the rest). Unfortunately since this time I've been continually encountering a major issue.
    This issue is that webpages will not load correctly (about half the time). Since the day I upgraded I've had issues with this, across all browsers. Sometime a webpage will load, sometimes it'll partially load and sometimes it seems to have loaded but actually
    hasn't (I.e. none of the links/inputs work). If I have an issue on a page, the only way I can get it to load is to click the stop button, navigate away from the page and then navigate back.
    I've tries assessing the problem with Firebug and it seems that the HTTP transfer is being cut-off at a certain point (which is non-consistent). The webpage is then stuck in a state of 'Transferring data' and will never finish loading.
    I've been looking around for answers and have come across some suggested solutions like running the All In One fix from tweaking.com, or flushing the DNS cache every few hours, but nothing is working.
    Has anyone any suggestions for how I could fix (or even further troubleshoot) this problem?
    Thanks
    David

    Please try a clean boot. 
    http://support.microsoft.com/kb/929135
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • ITunes store will not load. Im at a loss

    For about 3 days now the iTunes store will not load. It merely reaches this point:
    +One Moment Please.+
    +Connecting to the iTunes Store.+
    Loading
    +If iTunes doesn't open, click the iTunes application icon in your Dock or Windows Task Bar.+
    (note this message is not from Safari it is from the iTunes Store window in iTunes) I have looked at the FAQ on this site and it's best suggestion was to reset the keychain which I have done, and to check that I have the latest iTunes which I think I do. (iTunes 9.0.3 (15)) Yet it has not worked.
    When I try to update my applications for my iTouch it comes up with a message box saying:
    +Could not complete the iTunes Store request. The store may be busy.+
    +Check your Internet connection or try again later+
    As I said I have waited 3 days for the iTunes store not to be busy. I'm fairly new to macs so don't even really know how to go about diagnosing the issue or posting logs for you guys to look at if that would even help?
    So your advice would be appreciated.
    Thanks
    Brad

    iTunes 9+ uses the Safari 4.0.3 or higher engine to connect to the iTunes Store. Check if your Safari is up to date. If you need an update, get it here (be sure to tick the Snow Leopard version): http://www.apple.com/safari/download/
    Also, check in Safari > Preferences > Security and check that your cookies setting is either Always or Only from sites I visit.
    If your problem still persists, look at this document for some solutions: iTunes for Mac: Possible iTunes Store errors, http://support.apple.com/kb/HT1412

  • Comcast will not load completely

    I need more help about making comcast work. I have read almost all the questions and responses to the comcast website will not load completely. It will go as far as log-in/password site but will not load the message page.
    Interestingly, I have a mac at home at work. I have the problem at work but my Mac at home is working perfectly.
    I have tried to use every suggestion possible and no resolution.

    Hi,
    Are you using DNS #S in the TCP/IP tab DNS Servers field, in Network?
    below #'s from the portforward page- http://www.portforward.com/networking/dns.htm
    Comcast (pick the nearest!)
    68.87.66.196 Comcast (national) Primary DNS Server.
    68.87.64.196 Comcast Secondary DNS Server.
    68.57.32.5 (Virginia)
    68.57.32.6 (Virginia)
    216.148.227.68 (Denver, Colorado)
    204.127.202.4 (Denver, Colorado)
    68.42.244.5 (Taylor, Michigan)
    68.42.244.6 (Taylor, Michigan)
    68.62.160.5 (Huntsville, Alabama)
    68.62.160.6 (Huntsville, Alabama)
    68.87.96.3 (Pennsylvania)
    68.87.96.4 (Pennsylvania)
    Have you tried deleting all comcast cookies?
    Under Safari menu, Safari Preferences->Security tab...?
    Alternately....
    Home~/Library/Cookies folder/cookies.plistmove the cookies.plist to the trash
    Click on the Finder's Icon in the Dock.
    In The Finders window, sidebar, click on the Home icon
    (if Finder prefs. are not set to open home)
    Home~/Library/Caches folder/Safari cachemove the safari cache folder to the trash.
    Do a restart of your mac.
    Does that help any?
    Eme'~[)

  • Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

    XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

    I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
    Two points, Steve:
    1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
    2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
    Do you have any idea what to do to solve the problem?
    Regards

  • Internet explorer will not load

    my internet explorer will not load, i just get a spinning beachball and could anyone have any suggestions as my dvd i purchased mastering os x panther requires ie. thank you gb foley.
    emac   Mac OS X (10.3.9)  

    Just use a different browser. Are the files on the DVD just HTML files? If so, then right click on the HTMl file (Control-Click if you don't have a two button mouse) and pick Open With... and point it to another browser. Firefox, Camino (what I currently use), Opera, etc.
    Patrick

  • HT1386 iTunes will not load on my windows XP computer

    To Whom It May Concern:
    I have a laptop that runs windows XP Pro, and my iTunes is corrupted to the point it will not load and I can not sync my iPad.  I reloaded iTunes and it can not complete a full reinstall, because my files are corrupted.  I would like to a completed de-install however I don’t want to loss my backup files.
    Can someone give me some suggestions regarding what I need to do?
    Thanks,
    Dred1130

    First try:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Then try moving the backup to a safe place and then rebuild your computer amd backup up your Tunes library.
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    iTunes: Back up your iTunes library by copying to an external hard drive
    For more help go the the iTunes forum.

  • K7N2G will not load windows xp with any type of dvd/cd drive installed?

    This is on my old computer, the specs are as follows
    k7n2g
    athlon 2600+
    radeon 9700 pro
    Caviar SE wd800
    1gb samsung ddr333
     It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
    Thanks
    Chris
    PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
    two Opteron 250 90nm
    2gb 2-3-2-6 Corsair Reg/ECC DDR 400
    Tyan Thunder K8WE
    1x BFG 7800GTX OC (one for now)
    Audigy 4 Pro
    Seagate Cheetah U160 10k 73.4 gb
    Atlas V U160 18.3 gb
    Lite on Dual Layer burner

    Your Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
    So let us get this straight.
    This system used to work fine? Yes? Then what prompted you to reload the OS?
    You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
    A little more history might prove useful in helping us to give you better suggestions.
    Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
    ***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
    +3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
    Is this correct?
    Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
    This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
    I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
    The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
    Did you try clearing the CMOS and then initialize the default settings?
    Do you have a cheap AGP card to try instead of the 9700?

  • Outlook Addon will not load

    Upgraded SAP B1  from 2005 to 2007, had to roll it back to version because of Problems with our credit card application (CitiXsys). The roll back went well except the Outlook Addon will not load. I get the following error:
    BO_Outlook.exe - Entry Point Not Found
    This only affects 2 workstations. Re-installing the addon seems to have no affect.

    Dear Dave,
    In order to try to resolve the issue, please do the following steps :
    1. Open Business one Choose Tools -> User Tables -> BFEXTDBVERSION -
        Extension DB version, then Remove the all lines with Extension ID = "BO".
        This is the entry for MS Outlook Integration Add-on.
    2.  After that please uninstall the OI addon and reinstall again as per SAP Note : 819501.
    Regards,
    Rakesh Pati
    SAP Business One Forum Team

Maybe you are looking for