Field Profit Center is not populated while posting through T-Code F-02

Dear Sir / Madam,
While posting through T-code F-02 the field Profit center is in hidden mode
as a result I am getting the given below error.
"GLT2201 - Balancing field profit center in line item 001 not filled"
Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
I tried searching the same but could not find the solution.
Regards
Chirag Shah

Dear expert
Check following steps...
1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
2. Make sure Cost Center exists in the Asset Master..
3. Make sure profit center is entered into Cost Center master.
4.Check the steps where you assign the GL accounts to the splitting rules.
suggest you to go through the below mentioned links
Balancing Field "Profit Center" in line item 001 not filled
Balancing field "profit center" in line item 001 not filled
GLT2201 - Balancing field profit center in line item 001 not filled
Balancing field "Profit Center" in line item 001 not filled
F-51: Balancing field "Profit Center" in line item 001 not filled
Balancinf field profit center in line item 001 not filled
Regards,
Ajeesh.s

Similar Messages

Profit Center is not populating in SPL document

Hi
Would be highly obliged if some one can suggest on the following issue,
_Information related to issue:_
1) SPL Activated
2) Document split activated in SPL
3) SAP ECC 6 (No New GL and splitting activated)
_Issue_
Profit Center is not populating against Recon account line item in the SPL document, generated from Vendor Invoice posting (FB60) in FI, in fact the document splitting is activated for this very reason in SPL, but still the derivation is not happening for recon account line item.
Can some one suggest how the profit center can be derived against recon account line item in SPL document.
Regards
Ashwin

Hi Ashwin,
Whenever you post the issue to the SDN please give the scenario as well means which is the spl document you are posting
With regards,
Venkatakrishna

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

Balancing field "Segment" in line item 001 not filled while posting through

HI All,
I am experiencing the below error while processing FB70 transaction in Foreign currency with Tax codes (earlier this problem was not there, this is happening recently). The error description as given below.
"Balancing field "Segment" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose."
I have verified all the relevant settings like Classify G/L accounts for document Splitting and Document types etc and all settings are seems to be ok.
But in the below two instances, Iu2019m not getting any error:
If posting is done in company code currency with same tax codes.
If posting is done in foreign currency without tax codes
Your early respons is highly appreciated. Thanks in advance.
Thanx & Regards
Ramesh

Hello
Have you chosen Segment as Mandatory for the Scenarios during Document splitting. If not then for the G/L account you are facing problems with goto the field status and make segment field optional.
Thanks and Regards

IDOC_INPUT_INVOIC_FI:Balancing field "Profit Center" in line 004 not filled

Hi All
We have set up dopcument splitting funtionality and it is working fine when document is posted through FB60.
When I am trying the same using Idocs, it is issuing error message "Balancing field "Profit Center" in line 004 not filled".
The processing routine for this idoc is IDOC_INPUT_INVOIC_FI and process code is INVF.
I tried to debug it and found that the profit center is not being popoulated for vendor line item which is cautomatically calculated from the GL line items which are there in the idoc. This is the reason the error is issued.
I want to know why profit center is not populated for vendor item. When I do it from FB60, it is populated.
Can anyone help me here ?
Is there any SAP note related to this?

Hi
Pleaes note that it is not allowing me to enter the profit center, neither in PO nor in GR.
I created two different POs.
a. Both are for non stock material with account assignment category 'K'
b. Material group for both the POs are same.
c. GL Account i entered in both the POs are same.
d. CO area entered in both the POs are same.
e. Ogranizational details of both the POs are same.
f. Ofcourse 'Ordering Unit' is different in both the POs.
When i tried to make a GR for the first PO, it is automatically proposing the profit center and i can post the GR. But when i tried the second PO, it is nether defaulting the profit center nor asking for profit center. It is giving an error message "Balancing field Profit Center in the line item 001 not filled.
We have not changed the profit center or any configirutaions and when we tried to do the GR simultaniously for both the POs, one get posted correctly and the other one is giving this error message.
Can any one of you please let me know what should be the reason ?
Thanks
Venkat.

Profit center field is not appearing while posting of customer invoice and

Hi,
profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
Can anybody tell what are all new gl Reporting list of transaction codes

Hi,
In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
Thanks,
padmaja

FI Posting Error Balancing field "Profit Center" not filled-Vendor acc

Dear All,
System has been Configured the emp. loan and insurance deduction to be posted to respective vendor accounts. while making the FI posting system is throwing error like "Balancing field "Profit Center" in line item 001 not filled".
We have 8 profit centers. emp. loan deductions to be posted in vendor acc. across all the profit center wise. Business Area and Cost Center has been maintained properly for all employees in IT 0027 & IT 0001.
Doc. type also has classified for doc. splitting(spro>GL acc(new)>Bus. Trans --> Doc. Split --> Classify doc. type for split.).
How this issue can be solved, kindly help us out.
Regards,
Param.

Hi Murali,
You are correct,Standard SAP business transaction "0000" and variant "0001" - unspecified posting will not cater the above requirement.
Doc Type SA does not split. Either you can use "001" in front of SA doc type which I do not recomment, but else create a new Documnet type with 0001.
In standard configuration in many places SAP has used 0000 whcih does not split. You need to define new doc types as per your requirement and assign business transaction and variant to it as per business need.
Do let me know if it works.. else we can try something else..
Regards,
SAPFICO

Balancing field "Profit Center" not filled while doing F110

While posting document there is no error where as while clearing the document through F110 the error is shown as
"Balancing field Profit Center not filled " while doing F110.

Hi,
There could be various reasons why this error would come.
1. Check the settings for the new GL.
2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
3. Analyse the error on which line item the PC is not being filled.
Thanks
Aravind

While Doing F-28 error-Balancing field "Profit Center" in line 002 not fill

Hello Sir,
I am doing F-28 Customer Incoming Payment , i have clear three invoice against payment.
So when i post that entry system gives me error Balancing field "Profit Center" in line 002 not filled".
so that entry could not found profit center. (Document Splitting Activate)
So can i assign Customer reconciliation account in T code - FAGL3KEH and assign Common Profit Center there.
Plz guide me , if i will assign there recon account ?.
reply soon
Thanks
J

Hi James,
According to me, you have two options, either enter the PC at the time of document entry or Go to doc.splitting & uncheck the PC mandatory field under doc. splitting characteristics for GL accounting.
Your problem will get resolve by doing this.
Thanks & Regards
Anuj Agarwal

Balancing field "Profit Center" in line item 001 not filled in vendor post

Dear Experts,
Document Spitting is activated in our system. Now in Vendor posting we are getting the error " Balancing field "Profit Center" in line item 001 not filled ". Please provide your suggestions on this.

Balancing field "Profit Center" in line item 001 not filled error is coming due to splitting .Try to do the following and check ...
First check the line item 001 and get the GL no for which GL you are getting the error.
Goto PCP0 and double click on Document then goto Settings -> Layout -> Change here select Document Line Number ......check the line item 001
Ask your FI persons and get the required profit center or default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area is there in both the ITs.
Mohan

Error : Balancing Field " Profit Center" in line item not filled

Dear Friends,
I have a specific issue, as my client while posting inventory differences in [MI07] an error is populating as Balancing Field "Profit Center" in line item not filled.
Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
Thanks inadvance
Sri

Hi BK , thanks for your answer
in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
regards
sri

T-code: F-02 (Balancing field "Profit Center" in line item 001 not filled)

Dear Experts,
I am getting following error while i am doing transfer by using t-code F-02.
"Quote
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
u2022 No value can be derived for this field from the current document data.
u2022 You have entered a document type that is not designed for this business purpose.
Procedure for System Administration
Customizing
Unquote"
Where do you thing the mistake is and what i have to do? Please resolve my problem.
Thanks advance,
Best Regards.
Ripon Kumar Paul

Hi
Balance Sheet Accounts are required to be split in case you have document splitting activated u2026.. and in your case the profit center is made mandatory for the documents to get splitted u2026.. and the profit center would be derived from cost centeru2026u2026u2026. therefore to split the document by using document type u2013 SA through F-02 we need to do further settings, i.e., you need to configure u201CExtended Document Splitting Configurationu201D
For example: Rent expenditure is been posted which is having more than 2 Debits and consisting of different Cost Centers and posting to Rent Payable A/c which is a Balance sheet A/cu2026u2026.
Path: Financial Accounting (New) - - General Ledger Accounting (New) - - Business Transactions - - Document Splitting - - Extended Document Splitting -- Define Document Splitting Rule
Define your Business Transaction variant and for that variant define document splitting rule u2026u2026u2026.. where in you need to activate Automatically split check box for the desired categories.
Regards,
Sathish

Balancing field "Profit Center" in line item 001 not filled in VF02

Hi,
While releasing a billing document to accounting, we are getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
Let me give more details about this.
We are in a retail implementation. Transaction combining cash and credit are normal in retail scenario.
Normally SAP billing document type is RV which does not allow item category 04000 which is cash.
To counter the above, we have created a document type YV with unspecified posting and assigned to SD document type BV(which is cash memo).
The billing documents with 2 line items with different profit centres, with SD document type BV when released to accounting is giving this error.
Any suggestions.

Hi all,
This transaction Iam also trying to post in FI directly.
The entry I am posting is
Dr   Cash 1000
Cr   Sales 500       PC X
Cr Sales   500       PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the same error.
Can some one please guide. I have assigned cash account with item category 04000.
Thanks
Aravind

Balancing field "Profit Center" in line item 002 not filled and VF02

Dear All,
Below mentioned error we got in VF02 while releasing the billing to Accounting document.
In this case SO has created. Later with out delivery has been created Billing ( VF01) And Later Releasing through VF02 ( For only 1 specific Billing type )
But we have CRM Integration also from CRM 7.0 TO ECC 5.0 ( New GL Is there in ECC 5.0)
Here alternative solution is there i.e In OKKP T code if we deselect Profit center Button Issue will be resolved from SD side ( PC Issue )
Then problem will come to CRM with another message as ( Account-based PCA not active in year 2011 in controlling area 1001 (Notification I KM 029) Message no. CRM_ORDER_MISC 060)
Balancing field "Profit Center" in line item 002 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 002, even after document splitting.
System response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
Please help on same.

Hi
If i am selecting that indicator in 0KE5 Problem will be resolved in CRM.
But VF02 Is getting this Balancing field "Profit Center" in line item 002 not filled problem.
With out selecting that indicator please suggest. From Last 5 years we are using this Production System.
0KE5 indicator has not selected from 2005 to 2011 also.
CRM Is is process. we have selected in QA, But problm occurs to VF01 and CRM Process.
Simply if i select 0KE5 CRM problm will resolved.
Later SD Problem will come into the pictute.
Note: In PD1 System we hav not selected for 2011 also.
Pls put more inputs.

MIRO Error - Balancing field "Profit Center" in line item 001 not filled

Dear Experts,
Recently we upgraded to ECC 6.0 from 4.6C. We implemented new GL functionality.
We have also introduced new Profit Centers and have updated the same in Material Master.
Now, the new Profit Centers are valid from 01.04.2009 till 31.12.9999.
Now my problem is while doing MIRO after 31.03.2009 for old PO's i.e. the PO's which were created before 01.04.2009 the system gives me error "Balancing field "Profit Center" in line item 001 not filled".
This is because for the particular line item it picks the profit center from material master, but the validity of that (NEW) profit center is from 01.04.2009 whereas I want to do the posting in back date i.e. for eg. 28.03.2009. Due to which it does not get any profit center.
How do I resolve this problem. Is there any exit or BADI to do the same.
Regards...

Hi
There could be multiple reasons for this. Pls check on:
1. For the Expense Account assigned in DIF, have u made the assignment for deriving Profit Center & Business Area in T Code OKB9
2. Ask your FI Consultant to check the Splitting Characteristics for the MIGO. Check the Splitting Characteristics assigned to the Accounting Document Type assigned to T Code MIGO. Also check if all the GL Accounts have been assigned a splitting characteritics. The path is:
IMG> Financial Accounting(New)>General Ledger Accounting (New)>Business Transactions>Document Splitting
3. Do you maintain profit center as a default in material Master? If yes, check if the same has been assigned in the view extended for the plant concerned?
Pls check the settings. If any doubt, revert back.
Thanks & Best Regards,
rahul.

Field Profit Center is not populated while posting through T-Code F-02

Similar Messages

Maybe you are looking for