Field refrence and material type

i need to assign the field refrence ( migo-OMJX) and material type (Oms2), how shoud i go through.
regard
nabil

in tcode OMS9, in sel group i want to assign new table and field, system is not allowing me to assign. i am gatting bellow error
Function code cannot be selected
Message no. 00255
Diagnosis
You entered an inactive function code.
You can trigger this by:
inputting directly in the OK code field
inputting the fastpath of an inactive menu function
choosing an inactive function key, or even by
choosing ENTER, if ENTER has an inactive function.
In batch input, a function code is included in field BDC_OKCODE of the session, as long as this function code is not assigned to ENTER.
As well as activating function codes statistically in the Menu Painter (Transaction SE41), they can also be deactivated dynamically using the EXCLUDING addition with statement SET PF-STATUS.
regard
nabil

Similar Messages

How to get classification for a given material and material type in MM

Hello Friends,
One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
He is looking for probable table and table fields to Select from.
I would appreciate seriously any help in this regard.
~Yours Sincerely

Hi
Below given the flow and table details for a given class and class type.
- Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
- Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
- Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
- Table CABNT --> This table contains the "Description" for the internal character numbers.
- award points if this is ok

Filtering R/3 Material Groups and Material Types

Hi,
I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
I am tried doing the following:
1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
Thanks

Hi,
Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
There select the Object name as MATERIAL and click on the "filter settings" tab.
There in OBJECT FILTER SETTINGS
Enter the relevant filter criteria:
e.g. If you wnat to filter on Material type(MARA-MTART):
The input will be as follows:
Table /Structure :MARA
Field :MTART
OP :EQ Equality (= Low)
Low: "Material type name"
Incl/EXcl: Inclusive defined
And then click on the button "FILTER SYNC".
The filter settings are complete for the Material download.
HTH,
BR,
Disha.
Pls reward points for helpful answers.

Field selection for Material Type

Hi,
When we create the material type we are assigning a field ref. in Define Material attributes screen, and when we are creating the industry sector there also we are assigning a field screen reference.
No when we creat a materail with MM01, and if Field ref. is different in Industry sector and material type then which system will follow when we create the material it will be ref. to field selection in Material type or industry sector.
regards,,
zafar

Zafar,
When you talkout Material type is basically controls the properties of a Material like important control fucntions and attributes.
That is inturn, like Field selection, Special material type, Type of Procurement, Stock (Qty &Value) updation, User departments and Price control. But,
where as Field selection is control key which consits of some setoff fields which are subjected to a perticular Industry sector like, Plant &Construction, Mechanical Industry, Pharmacuetical Industry, Chemical Industry, etc. In this case field selection is different from Industry to Industry, but in some cases field selection is common for the similar kind of Industries or Industry sectors.
And the Field selection is subjected to the Material type as well, that means each material type can have their own Field selection (it is named with a field selection key 3 char sap code for field selection).
Comming to the Creation of Material master record : using MM01 ( create material -general)
here, you need to select the material type and industry sector --> then you need to choose the relevent user departments and subsequently plant, sloc.etc.
Note: when you are creating the material in the above fasion, you need to enter the relevent data which is w.r.to the user departments which you have choosen, and those inturn reflect from this control data ( attributes and important control functions as I said is the definition of Material type).
And this is how a material is created, wether it can be a Raw material, Semi finished Product or Finished Product, etc.
Note: There is an option to create your own Material Types, but SAP suggests to use standard Material type when you create material master record, unless otherwise a special requirement comes from your client is from Specific Industry sector or if running a special kind of business which is not yet dragged into the SAP R/3 system.
Hope this will clarifies your query.
With Regards,
Srin

How to find Industry sector and material type of created Material

I have created a material by choosing Industry Sector and Material type as "Retail" and "Finished Product".
After creating the material I want to know, what is Industry Sector and Material Type of the created Material?
Please provide the corresponding T-code or solution.
Thanks in ADVANCE.

hi
for single material
u can go to mm03 material then basic data1
then click i icon in blue
u will get all details
for range of materials
go to se16
ive table MARA
then enter
go to settings >field selection here select
MTART Material Type
MBRSH Industry Sector
and then click ok
then execute
u will get list of material with ind sec and mat type
regards
kunal
award if helpful

Description of material group and material type

hi,
i want to know which are the tables for the description of material group and material type.
Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PM

table name :MARA
Field name:
Material group:MATKL
for Material description
Table name :MAKT
fieldname:MAKTX
Rewards plz..........

Not getting the Link between GEIL and material type: procured material not

Hi Friends,
Some material corresponding to certain G/L Account numbers are not appearing. From Fagll03 I can check the G/L Account number, but how shall be able to get the corresponding table field which holds the material or to check whether that G/L Account number has been properly linked to the material.
Please suggest what to do. Is this a problem of programming ? or ...
Thanks,
Saheli

Hi Saheli,
Link b/n GL accounts and Material is in this way.
Material is created based on material type and material type is connected to Valuation class via Account category reference.
Now that for each valuation class corresponding GL accounts are defined in customizing.
you can check the same in Tcode# OBYC.
To check the posting to Inventory account during GR, select BSX (Inventory posting) and check whether the corresponding valuation class has got the assignment with GL accounts or not.
Hope this help you out.
BR,
Krishna

How to keep Industry sector and Material Type in Display for Tcode MM01

How to keep Industry sector and Material Type in Display for Tcode MM01( create material Initial screen)
Thanks,

Hi
Yes, your requirement is possible using screen variant
1. use tcode SHD0
2. give transaction as MM01
3. goto screen variant tab - assign some name - enter program name and screen name
(from mm01 - F1 help)
4. goto transaction variant tab - assign some name - assign already defined screen variant name
5. goto standad variant tab - transaction variant name already fetched automatically - click on active button (it was placed after transaction variant name
Raju

Combination of plant SUNP and material type finished product does not exist

HI i am suneel
my issue is combination of plant SUNP and material type finished product does not exist when i posting to material in t.code
MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
Thanks
with regards
suneel

Hi lakshmi pathi ,
Sorry for the inconvenience i am new for this sap sd and also this community . Actually yesterday and today i got lot of solutions from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
sorry for the inconvenience
any way thanking you for giving valuable suggestion.
with regards
suneel

BAPIs for populating Industry Sector and Material Type dropdowns

Hi all,
I have a requirement to create WebDynpro appliation,
which is the replica of MM01 Transaction page.
In the first page i want to populate Industry sector
values and Material Type values in 2 dropdowns.
Can anyone please tell me what are the BAPIs i need to
call and how to find the required BAPIs?
Thanks

You can use the function module RFC_READ_TABLE. The tables that you need to read are T137 for industry sector and T134 for material type.
Regards,
Rich Heilman

Industry Sector and Material Type list of values in cFolders

Hi,
How to transfer the List of Values for Industry Sector & Material Type from R/3 to cFolders system?
We have R/3 Production system running for the past 3 years. We are implementing cFolders now. While Material creation in cFolders, the List of Values listed for above mentioned fields are not as per R/3 values. Hence we need to change the same LOV in cFolders as per R/3. How to do it?
Prasanna
9036129381.

Hi,
The parameters material type and industry sector are used
to classify a material. They define its possible uses.
For example if you selct indutsry type as retail or mechanical it will classssify the material accordingly. again material type is semifinished then this you can also use as a raw material. In mm02 or MM03 u cant see it.
If you want to see these you can go to SE16 and put table name MARA and can see it.
Hope this will help.
Reward point if helpful.
Thanks,
Raja

Both material groups and material types in search while creating SC

Hi Guys,
While creating a shopping cart ,when we are searching for materials that have been replicated in SRM we can search the material based on various parameters like Product ID ,Category ID etc.In SRM the Category ID is normally the material group.Now we want to search the material based on both,material group as well as material type.But i can have only one of these as my category.2 hierarchies R3MATCLASS and R3PRODSTYP exist in the system.But i do i make it work so that i can see both the material type as well as material group while selecting materials to shop.Is it possible??
Thanks in advance.
Regards,
Pawan

Hi,
What do you want to see exactly in the Selection screen fro the Product search???In the Std screen,you already have the field called PRODUCT TYPE where you can enter '01'(hierarchy) and '02'(Services).
But if you want the field HIERARCHY in the selection screen,then you need to modify the Std search help exit(BBP_F4IF_SHLP_EXIT_PRODUCT_GEN) attached to the Std Product search help(BBPH_PRODUCT) for the SHOP tarscn
You will need to create a Z search help exit(Z FM) and attach that to the Std Product search help given above.In the Z exit,you need to write the logic to display the reqd fields in the Selection screen.
BR,
Disha.
Pls reward points for useful answers.

SAP report for movement type and material type

Hi!
I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on material type ROH.
It is urgent, if you could help me I would be very greatful!
Sincerely
Anders Öhrling

Thanks for your answer!
I have managed to join the two tables and created a report that will work, except that the amounts in local currency that is given by movement type 201 is not negative (as in MB51). I need all movement types that generate a debit must be shown as a negative value. Wo when I summarize all the movement types I end up with the value of 101 minus 201.
Is that possible without ABAP programming?
Sincerely Anders Öhrling

Service master and material type 'service'

Hi everybody.
I am a bit confused about "Service"
There is a service master that we can use to store and procure service.
Also we can use material master to store 'service' using material type 'service' and procure service in that way.
I want to know what is the difference between the two ? When shall I use what ?

Hi
If you do not want to use 'External Service Management', you can use materials of type Service (DIEN).
This will be similar to any other account assigned material PO with free text. Instead of using free text, you are using material master and also helps you in identifyign service purchases from other material purchases. You will not use item category 'D' in this case. You do GR here.
Service masters are used when you use item category 'D' ('External Service Management'). There are additional flexibility of defining service specifications, service outlines, using service entry sheet etc here.
Best regards
Ramki

Relation between Valuation Classes and material type

Dear all,
How i can keep relationship between valuation class & material type.
Can i put many valuation classes & single material type and vice versa.
Regards,
Nitin PAtil

Nitin,
Valuation class is used for automatic account determination .Valuation class is depend on material type.
Valuation class is key used to group together material with same account determination.
Valuation class is assigned to Material type via account category reference.
Same valuation class can be assigned to differnt material type if they belong to same account category reference.
However only one account category reference is assigned to one material type.
For Ex.
Mat Type         Act Cat Ref             Valuation class(only example)
ROH                0001                          3001,3002,3000
HALB               0001                          3001,3002,3003
FERT                0002                          7900 , 7902
I hope this will clear your concept.
Vivek

Field refrence and material type

Similar Messages

Maybe you are looking for