Field -RLTYP is not defined in ABAP-dictionary

Hello, gurus!
We have upgraded to ERP 6.0 (from 4.6c).
Now I have a problem with search help in TX.1
1. Transaction TX.1
2. F4 on the field KONTRH
3. Choose the "Partners by BP Role" tab
4. F4 on BU_PARTNERROLE
Next I see message "Field -RLTYP is not defined in ABAP-dictionary" instead of the roles list.
I appreciate any help!
Thanks in advance,
Anton.

I've found the solution!
Note 1525604

Similar Messages

Transfer Purchase Order - Error message "Field selection ZTR not defined"

Hi all,
I've customized a new transfer purchase order type : TRA.
When I go to ME21N and choose TRA type, SAP displays this error message :
"Field selection ZTR not defined
Message no. ME028
The field selection required by the system is not defined in table 162.
Further processing is currently not possible."
How can I fix that please ?
Regards,
Bahia.

Hello,
Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
Regards
Mahesh Naik

Field Selection PTFF not defined , error key : RFC_ERROR_SYSTEM_FAILURE

While executing BAPI_PO_CREATE1 by using Adaptive RFC Model in Webdynpro
I was facing the following Error
Field Selection PTFF not defined , error key : RFC_ERROR_SYSTEM_FAILURE
But while trying to create BAPI_SALEORDER_CREATE is working properly with the same configuration.
If anyone come accross this issue please help me out

This is beacuase of some issues in the parameters that are passed and is rectified.
krishna

Field selection PT1L not defined

Hi,
We have configured a new document type and field selection for scheduling agreement. When we tried creating an SA, system prompted "Field selection PT1L not defined" error. What does the error mean? How do we go about it?
Please advise.

Hi,
PT1L is something whose use is not at all logical the reasons are and thus not defined in standard SAP
1> From the term PT1L it represents Limit item (i.e Blanket ) for Scheduling agreement
2>Now we use SA to work with schedule lines but for Limit items there no GR or any goods receipt so what is the use of SA in this case better you go with PO.
3>obviously you can create PT1L by copying any other existing field selections in (but I would suggest not to do this)
OLME ->Scheduling agreement ->Define Screen Layout at Document Level
Also read this
http://www.sap123.com/a/41/

InfoSource copied from 0BPARTNER_ATTR is not found in ABAP dictionary

Hello friends,
I am migrating 0BPARTNER_ATTR flow from 3.5 to BI 7.0 which has InfoSource.
So i copied update rules and trasfer rules from the existing flow as both have routines.
When i tried to create transformations from update rules, it propted me for an InfoSource and i gave a new infosource name ZBPARTNER_ATTR as it has not accepted the old one 0BPARTNER_ATTR.
So now new flow is as follows: 0BPARTNER_ATTR(DS) - ZBPARTNER_ATTR(IS) - 0BPARTNER(IO).
Now the problem is i don't see this commmuncation structure in ABAP dictionary like the old one /BIC/CS0BPARTNER_ATTR. I expected /BIC/CSZBPARTNER_ATTR. So in the update routine , it is not giving any result for new one.
But i don't have any issues with the similar model for sales statistics( but it has custom InfoSoure ZUC_ISU_01).
Please advise
VNM

Hi;
It's better if you create direct transformation between DS and IO.
You will save many time in maintnance and the performance is better.
Regards;
Ricardo

ALV fields which are not referenced to data dictionary table fields

Hello,
I am using function module reuse_alv_popup_to_select.
How do I display fields in ALV which are not referenced to
data dictionary table fields.
I am showing 4 columns in alv out of which first column is checkbox
and remaining 3 columns are from data dictionary and it works fine.
Now I need to add one more column which is of type checkbox.
I have added this field in my ITAB as flag(1) type C.
When I add this flag field in the field catalog, I get exception.
Regards,
Vishal.

Hey guys,
Finally I got rid of such a stupid problem.
There were no problem in the code.
while assigning fieldname to field catalog I had given fieldname
in lowercase.
I changed it to uppercase and problem got solved.
Thanks,
Vishal.

Jco error RFC adapter field PT F not defined

Hi Experts,
I am in a strange situation as I have become clue less on this issue
It is a file to XI to RFC scenario.. runs fine in dev environment
When I change the parameters in teh rfc communication channel to point to QAS it throws
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_TRAX_PO_CHG_IV in remote system (RfcClient[CC_QAS]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Field selection PT F not defined:
There is no such field as PT F and besides the version of the bapi in QAS is in sync with the dev..
pls help me ou ton this
Edited by: Ravindra Teja on Feb 27, 2011 8:45 AM

Hi,
First of all, can you please elaborate what you want?
secondly, why don't you transport your developments to QAS?
Third, what is the reason behind changing the receiver RFC adapter parameter to QAS?
4th, do you want to post data to QAS, if yes, did you transported the RFC to QAS ? Please re import the rfc to your swcv from QAS system.
Please check communication channel if you getting any error?
Regards
Aashish Sinha

Field not validated from ABAP dictionary

HI ,
I have created ALV using OOP. . I implemented F4 functionality on the field AUFNR on output . for validation on AUFNR i passed ref field(aufnr) and ref tab(aufk) in field catalog but still it is not validating .
field catalog :
i_fieldcat_line-fieldname   = c_aufnr.
i_fieldcat_line-coltext     = c_prod.
i_fieldcat_line-scrtext_m   = c_prod.
i_fieldcat_line-col_opt     = c_x.
i_fieldcat_line-edit        = c_x.
i_fieldcat_line-f4availabl = c_x.
i_fieldcat_line-ref_table   = 'AUFK'.
i_fieldcat_line-ref_field   = 'AUFNR'.
* i_fieldcat_line-checktable = c_aufk.
i_fieldcat_line-key         = c_x.
i_fieldcat_line-col_pos     = 2.
i_fieldcat_line-outputlen   = 12.
could you please help me ?
Thanks ,
Mayank

Hi Mayank ,
In OO provided you have an editable grid register the event ENTER.
Once this is done you can use two methods HANDLE_DATA_CHANGE which will be entered if any data is actually changed and the user presses ENTER and HANDLE_DATA_CHANGE_FINISHED which is entered after you've done your changes.
If no data is changed then the event is not raised and you don't have to do any validation etc.Using your method with the &SAVE functionality you don't know if the user has actually entered anything or not. You'd have to validate your whole table before saving and also decide what to do on any error(s). Your table could have say 20,000 lines or more -- to validate this would definitely be a beginners way - very inefficient and totally elephantine.With the Data changed method you can work interactively and you are only dealing with changed data. You get control at data entry time which is far better than waiting until you get to SAVE and then have to decide what to do.
In these methods you should be able to examine your data and take the appropriate action.
You don't need any special toolbar functionality unless you want to say re-display the changed grid and save it to SAP tables / run transactions / create IDOCS etc etc.
I think this is actually better than using a toolbar function as there is nothing to stop the user from either pressing the toolbar when nothing has been changed or you then have to do a whole set of validation after the user has entered a whole lot of data (and you still have to get the user's data anyway).
Why not let the system give it to you in the data changed method --there you can validate it.
By all means add a toolbars for SAVE / UPDATE etc if you want.
You do this by adding the functions to the alv toolbar in ON_TOOLBAR and use the ON_USER_COMMAND method to execute the function when the toolbar button is pressed.
Look for some of my previous posts -- I've posted the code often enough.
However for the Data changed stuff.
in your program add these events, methods and handlers
DATA: g_handler TYPE REF TO lcl_event_handler. "handler DATA grid_container1 TYPE REF TO cl_gui_custom_container . DATA grid1 TYPE REF TO cl_gui_alv_grid.. CLASS lcl_event_handler DEFINITION .   PUBLIC SECTION .     METHODS: .... your other methods * data changed handle_data_changed     for event data_changed of cl_gui_alv_grid       importing er_data_changed, *data changed finished handle_data_changed_finished      for event data_changed of cl_gui_alv_grid. ...... ENDCLASS.                    "lcl_event_handler DEFINITION CLASS lcl_event_handler IMPLEMENTATION. * Your other methods ........... method handle_data_changed.   perform data_changed using er_data_changed.    endmethod.                    "data_changed    method handle_data_changed_finished.     perform data_changed_finished.   endmethod.                    "data_changed_finished ENDCLASS.
In your application program
form data_changed   using er_data_changed.    break-point 1. * code validation routines etc here endform. form data_changed_finished. * code any requirements after all changes finished   break-point 1. endform. * before displaying the grid struct_grid_lset-sel_mode = 'D'.   CREATE OBJECT g_handler.   SET HANDLER g_handler->handle_double_click FOR grid1.   SET HANDLER g_handler->handle_hotspot_click FOR grid1.   SET HANDLER g_handler->handle_toolbar FOR grid1.   SET HANDLER g_handler->handle_user_command FOR grid1.   SET HANDLER g_handler->handle_data_changed FOR grid1.   SET HANDLER g_handler->handle_data_changed_finished FOR grid1.     CALL METHOD grid1->register_edit_event        EXPORTING           i_event_id = cl_gui_alv_grid=>mc_evt_enter.
just add your own code in the forms data_changed and data_changed finished.
You can get the contents of the parameter er_data_changed from cl_gui_alv_grid via SE24.
Hope this will help you.........
Regards ,
Yogendra Bhaskar

Subscreen field value is not transferring from ABAP program to Screen

Hi All,
I have a requirement to add a new field in a standard program subscreen( program SAPLKACB, Screen: 1006 ). This subscreen is being called from main standard program SAPMV45A.
When i see the new field value in Debug mode, some value is there. But when the subscreen is displayed value is not displayed. The value is available till end of Main program PBO. But it is displayed with no value, when the subscreen is shown.
Please let me know what could be the reason behind this. Points will be awarded for the helpful answers. It is very urgent.
Regards,
Yellappa.

Hi
did you add code to the flow lgic?
INCLUDE MV45AOZZ. " User-modules PBO
INCLUDE MV45AIZZ. " User-modules PAI
Rgds,
JP

Delete Views that not known in ABAP

Hi there,
after an Upgrade i have Views:
BC402_CARPLAN
BC402_FLIGHTS
DV_FLIGHTS
M_VMVA1
SBC400_BOOKING
SBC400_CONNECTN
SBOOKINGS
They are not in the ABAP Dictionary.. how can i delete them?
With SE11 i cant delete them.. because they are not in the Abap Dictionary
Thanks for your help
best regards

Hi Bjoern,
Try SE14 , you can able to edit it
if useful reward
Thanks
Bala

Field in structure 'is not defined in the ABAP Dictionary'

Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
David

Hey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

Syntax error - Field is defined differently in screen (ABAP Dictionary)

Hi
I get a syntax error after decoupling a dynpro field from its original DDIC type (Disabling checkbox "Frm Dict"). The error message is
[DE] Feld ... ist im Dynpro unterschiedlich definiert (ABAP-Feld, DDIC-Feld).
[EN] Field ... is defined differently in screen (ABAP/4 field, Dictionary field).
The error occurs on PLM 600/700 but not on PLM 500.
Thanks in advance for your help.
Regards,
Michael

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

RV13B is not defined in the ABAP dictionary

Hi Experts,
Iu2019ve a requirement to create a smartform,and then save it as a pdf and email. I have all of this done except for one part. At present my email address (for testing purposes) is hard coded as the email address. However I want to automatically pick up the email address to which my form is to be sent.
The email address is found in transaction mn22. The pdf will be emailed to RV13B-PARNR (Partner) based on KOMB-LGORT (storage location). Each storage location is unique.
Iu2019ve put in the following code:
SELECT PARNR FROM RV13B INTO CORRESPONDING FIELDS OF TABLE it_vemail[]
WHERE stor_loc EQ KOMB-LGORT.
However Iu2019m getting the error RV13B is not defined in the ABAP dictionary as a table, projection view or database view.
Could anyone give me some help?
Thanks,
Mike.

Mike,
F1 Technical help will not give you the table name in some cases.Instead of the table it will refer to the structure.In such a case you need to get the corresponding table for that field either from SQL trace or searching the possible tables with such field using SE84 which requires a bit of analysis in zeroing on the correct table where you can get the appropriate data related to that field.
SE84>>ABAP Dictionary>>Fields>>table fields.
Give PARNR and get the list of the possible tables containing PARNR as a field.If one is aware of the functionality then it will be easier to zero in on the field and the corresponding table from that list.
SQL trace can help you in tracing out the possible tables used by a transaction code.ie if you do a SQL trace on VA01 you will come to know all the possible tables of VA01.
Thanks,
K.Kiran.

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Field -RLTYP is not defined in ABAP-dictionary

Similar Messages

Maybe you are looking for