Field selection from adrc table
HI all,
Actually selecting some fields into say table t_likp based value entered for vbeln.
by takin t_likp-vbeln i can go to vbpa and select adrnr from vbpa for parvw eq 'sh'. my question is can i take this vbpa-adrnr
and go to adrc directly for detailed address or
is it necessary for me to go to kna1 from vbpa-kunnr and get the adrnr number form kna1 to go to adrc?
plz help.
thnks n regards,
Ahmita
Hi,
try this way..
* Fetching Sales order number
SELECT SINGLE * FROM ekkn INTO w_ekkn
WHERE ebeln = xekko-ebeln
AND ebelp = xekpo-ebelp.
* If sales order number exist for PO and PO item then looking
* for Address number to get the details and modifying
* (Overwriting)the Existing Address Details in segment 'E1EDKA1'
IF sy-subrc = 0 AND w_ekkn-vbeln IS NOT INITIAL.
SELECT SINGLE *
FROM vbpa
WHERE vbeln = w_ekkn-vbeln
AND posnr = '000000'
AND parvw = 'WE'.
IF sy-subrc = 0.
SELECT SINGLE * FROM adrc WHERE addrnumber = vbpa-adrnr.
ENDIF.
ENDIF.
Prabhudas
Similar Messages
-
Field selection from differant tables
hello all,
i need to select differant fields from differant tables when i select common fields from both the tables, is it necessary that the common field need to be a primary key in both tables.
thanks in advance
seenuHI,
No its not required that the common field be part of the primary key in both tables only thing is you need to prefix the table name if the field names are same. But if you are using a INNER JOIN then there is no need to select both fields since you know the content of both fields will be same if JOIN is ON these fileds as well.
Regards,
Sesh
Message was edited by:
Seshatalpasai Madala -
How to do a select from a table whose name is saved in a field?
Hello,
This is an abap report.
I need to do a select from a table whose name is saved in a field of Z* table.
Like this..
SELECT * FROM znodos.
SELECT * FROM znodos-tabla. "znodos-tabla contain the Z* table name
move zodos-tabla-txtmd to.....
endselect.
endselect.
Is this possible??
ThanksHi Ilie Aleman
Give variable name in ().. Variable name refers to variable which contains table name
SELECT * FROM (znodos-tabla).
Regards,
Mohaiyuddin
Edited by: Mohaiyuddin Soniwala on Jan 22, 2008 5:18 PM -
How to do a SELECT from different tables into an internal table?
How to do a SELECT from different tables into an internal table?
I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
REPORT zinternal_table.
TABLES:
mara,
marc,
zperson.
TYPES:
BEGIN OF str_table1,
v_name LIKE zperson-zname,
v_matnr LIKE marc-matnr,
v_emarc LIKE marc-emarc,
v_werks_d LIKE marc-werks_d,
v_dstat LIKE marc-dstat,
END OF str_table,
i_table1 TYPE STANDARD TABLE OF str_table1.
DATA:
BEGIN OF str_table2,
v_mandt LIKE mara-mandt,
v_ernam LIKE mara-ernam,
v_laeda LIKE mara-laeda,
END OF str_table2,
itab_final LIKE STANDARD TABLE OF str_table2.first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
then for all the entries in that internal table retrieve data from zperson into another internal table.
then loop at one internal table
read another internal table where key equals in both the tables.
finally assign fileds if sy-subrc = 0.
gs_finaltable-matnr = gs_table-matnr
etc...
and finally append gs_finaltable to gt_finaltable.
there u go ur final table has all the data u want.
regards
Edited by: BrightSide on Apr 2, 2009 3:49 PM -
Selecting from two tables and confirming from them despites they not relate
Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
ThanksHi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row card%rowtype;
r_student_details student_details%rowtype;
cursor c1 is
select *
from card
where pin_number = p_pin_number;
cursor c2 is
select *
from student_details
where exam_number = p_exam_number;
begin
open c1;
loop
fetch c1 into r_card_row;
exit when c1%notfound;
.... do whatever you want..... and the samething you can do with other cursor
end loop;
close c1;
end p1;Hope this helps
Ghulam -
Selecting from multiple tables, into one internal table
Hi,
What is the best & most efficient method of selecting from multiple table (in my case 6,) into one internal table?
Thanks,
John
Points will be rewarded and all responses will be highly appreciated.I have simple example :
First one - Join 5 tables
data : f1 type i,
f2 type i,
f3 type i.
start-of-selection.
get run time field f1.
write the query 4 or 5 tables join.
get run time field f2.
f3 = f2 - f1 ( Total time).
Second one - joins 3 table and use for all entries
data : f1 type i,
f2 type i,
f3 type i.
start-of-selection.
get run time field f1.
write the query 3 tables join and use for all entries
get run time field f2.
f3 = f2 - f1. ( Total time )
Finally you can have time diffrence between the both sql statement. -
Select from DB Tables with String
Hello Gurus,
I created following 'simple' DDIC Table:
CLNT MANDT CLNT 3 0 Client
ID ID NUMC 8 0 Object ID of Business Event Offered
DATE DATUM DATS 8 0 Date
STR (none*) STRING 0 String
... where field str has the predefined type string!
When I now want to search the string (I know it would be very slow, but that's ok in the first step, later on we create an index table or sth like that)
select * from ztas254_str_test
into table lt_str_test
where str like '%test%'.
on activation of the program I get the error
"The field "str" is a long string, so it cannot be used in, where on or having conditions."
How can I directly select/search the str field in from the table? Besides from the like condition I tried to search with a range and IN. But the same error occurs.
I'm testing on an ECC6.0 SP12.
If someone ever tried somethink like that please let me know!
Thanks in advance,
Alej
PS: * Points will be rewarded! *By now solved via an index table.
-
Selection from different tables
Hello Everyone,
I have a situation where I have 15 fields in the selection screen.
The selection is dependent on three or more tables.
First I have selected from two tables but if the user enters values in the selection screen then how to make the selection.
Tables dont have common fields between them. LIKP, LIPS, VTTK, VBUK and VEKP are the tables.
Can you guys guide me.
Thank you.Hi Vinod,
First I have selected from two tables but if the user enters values in the selection screen then how to make the selection.
Your query is not so clear. When are you fetching the data from two table whether before selection screen input (Initialization event) or after selection screen?
Can you please elaborate your query and better if you post your Selection Screen screen-shot.
Regards,
VIjay -
Urgent. . .About select * from multiple tables
When I am doing the 'Select * from tables' in JSP,
sql = dbconn.prepareStatement("SELECT * FROM protein WHERE protein_id ='"+p_i+"'");
It works, because I only select one table.
Then, I change to select from two tables,
sql = dbconn.prepareStatement("SELECT * FROM protein, fuses WHERE protein_id ='"+p_i+"'");
It also works properly?
However, When I do like:
sql = dbconn.prepareStatement("SELECT * FROM protein, protein_taxa WHERE protein_id ='"+p_i+"'");
It doesn?t work.
So, I think it might be the problem that there is a common column 'protein_id' in both tables, although protein_taxa.protein_id is a foreign key of protein.protein_id. Therefore, I can select two table protein, fuses which have different columns, but no way to select the table they have same name column.
However, it?s essential for me to select all the data from the database. Any way I could achieve it? Thanks a lot!!SELECT *
FROM protein, protein_taxa
WHERE protein.protein_id = 'a_protein_id'
and protein.protein_id = protein_taxa.protein_id It would also be good to indicate which fields you want on the select clause. This will liberate the server to return two fields with the same name.
SELECT protein.protein_id, protein.name, protein_taxa.taxa /* ??? */
FROM protein, protein_taxa
WHERE protein.protein_id = 'a_protein_id'
and protein.protein_id = protein_taxa.protein_id -
How to populate a table based on a row selection from another table.
Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganeshI understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps. -
Function Module to get address from adrc table
Hi,
Is there any Function module which is retrieving data from ADRC table by passing address number.
I tried in SDN and I got address_read but its obsolete.Hi,
Please try this piece of code
data: wa_addr1_sel like addr1_sel,
wa_addr1_val like addr1_val.
clear : wa_addr1_sel, wa_addr1_val.
wa_addr1_sel-addrnumber = it_adrnr-adrnr.
call function 'ADDR_GET'
exporting
address_selection = wa_addr1_sel
importing
address_value = wa_addr1_val
exceptions
parameter_error = 1
address_not_exist = 2
version_not_exist = 3
internal_error = 4
others = 5.
if sy-subrc eq 0.
it_addr-adrnr = wa_addr1_val-addrnumber.
it_addr-name1 = wa_addr1_val-name1.
it_addr-street = wa_addr1_val-street.
it_addr-city = wa_addr1_val-city1.
it_addr-region = wa_addr1_val-region.
append it_addr.
clear it_addr.
endif.
Regards
Hiren k.Chitalia -
Select from nested table in a nested table security problem
please help
running Oracle 9.2.0.3.0 on RH AS 2.1
I can select the inner most nested table as the creator, but can't use the same select statement as USER2.
ORA-00942: table or view does not exist
-- begin make of objects and tables
create or replace type mydata_t as object ( x float, y float);
create or replace type mydata_tab_t as table of mydata_t;
create or replace type mid_t as object (
graphname varchar2(12),
datapoints mydata_tab_t );
create or replace type mid_tab_t as table of mid_t;
create or replace type top_t as object (
someinfo int,
more_mid mid_tab_t );
create table xyz (
xyzPK int,
mainstuff top_t )
nested table mainstuff.more_mid store as mid_nt_tab
(nested table datapoints store as mydata_nt_tab)
-- grants
grant all on mydata_t to user2;
grant all on mydata_tab_t to user2;
grant all on mid_t to user2;
grant all on mid_tab_t to user2;
grant all on top_t to user2;
grant all on xyz to user2;
-- insert
insert into xyz values (1, top_t(22,mid_tab_t(mid_t('line1',mydata_tab_t(
mydata_t(0,0),
mydata_t(15,15),
mydata_t(30,30))))));
commit;
-- select fails as user2
select * from table(select Y.datapoints as DP_TAB
from table(select X.mainstuff.more_mid as MORE_TAB
from scott.xyz X
where X.xyzPK=1) Y
where Y.graphname='line1') Z;
-- select works as user2, but i need individual lines
select Y.datapoints as DP_TAB
from table(select X.mainstuff.more_mid as MORE_TAB
from scott.xyz X
where X.xyzPK=1) Y
where Y.graphname='line1';Thank you for your reply.
I have tried
select value(t) from table t;
but it is still not working. I got almost the same answer as before.
Anyway thank you very much again.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by MARCELO OCHOA ([email protected]):
Originally posted by meimei wu ([email protected]):
[b]I created a nested object-relational table using REF type in oracle8i. when I tried to select * from the table, I got lots of number as the ref type values, but actually, the value in ref type should be of type varchar2 and number. The number I got looked like following code:
JARTICLE_REF_TYPE(000022020876108427C2FE0D00E0340800208FD71F76103B99B12009C0E0340800208FD71F,
Does anyone know how I can get the actual value that I inserted into the nested table?
your help is appreciated.<HR></BLOCKQUOTE>
Try this:
select value(t) from table t;
Best regards, Marcelo.
null -
How to avoid ORA-3113 when selecting from XMLTYPE table
Hi,
If I register an XML-schema, Oracle automatically creates a table xxxxxx_tab of XMLTYPE. (I use Oracle 9.2.0.1)
When I do a DESCRIBE or a SELECT from this table I get the error: 'ORA-03113:
end-of-file on communication channel' and my connection is dropped.
I opened a TAR for this and Oracle says: 'It is an internal bug so cannot be viewed in metalink. This is fixed in release 10i.' (do they mean oracle DB rel 10i, or a new version of XDK?)
I saw an example in Oracle Magazine (Jan
2003) "Make XML Native and Relative" about Oracle 9i Rel 2 and XML. As you can see in codeListing 7, the author also does a select from such a
table (CD331_tab): Why doesn't he have any problems?
Is there a workaround for this bug? What's the purpose of being able to automatically upload XML-data to a registered schema if you can't do a select of the data?
Thank you!It appears that the XML Schema is not entirely valid. Specifically, the definition of element "DeviceCategory" has two definitions of element "Audio" appearing within a <choice> model i.e. something like :
<element name="DeviceCategory">
<choice>
<sequence>
<element name="Audio">
</sequence>
<sequence>
<element name="Audio">
</sequence>
</choice>
This is disallowed by XML Schema spec per. the Unique Particle Attribution Constraint. The general idea is that a XML Schema describes a determinstic content model i.e. schema processor can always unambiguosly determine the matching declaration when it encounters an element. However that's not the case with the declaration above. On encoutering "Audio", it could match either the first or the second declaration of the element. Hence the error.
You will have to rework the schema to avoid this constraint. One mechanism could be to define complexType and their restrictions.
- Ravi -
Select from a table from other schema
Hi,
I want to make a select from a table how is into other Schema and into other instance.
form example, if I have _2 schemas (in diferent instances)_:
SCHEMA1 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX1)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA1)*
SCHEMA2 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX2)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA2)*
and into SCHEMA2 there is a table TABLE_A.
If I`m connected into SCHEMA1:
how can I do to make a select from the TABLE_A?
thanks very much.1) Referring to an entry in the tnsnames.ora file as a "schema" as you have here with schema1 and schema2 is likely to be confusing. You have multiple schemas in the same database-- in this case, you appear to be trying to query tables in a different database. If we try to answer using your TNS aliases "schema1" and "schema2", there is likely to be a great deal of confusion between schemas/ databases/ and TNS aliases. So I will assume that your tnsnames.ora file actually reads
TNS_ALIAS1 =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = HOST1)
(PORT = 1560)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DB1)
TNS_ALIAS2 =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = HOST2)
(PORT = 1560)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DB2)
)2) Given the TNS aliases above, assuming that we are talking about the tnsnames.ora file on HOST1, you would need to create a database link from DB1 to DB2. You can either specify a fixed username and password for the database link or you can specify that the connection happens as the current user (which assumes that the passwords are synchronized between the databases).
CREATE DATABASE LINK to_db2
CONNECT TO username_on_db2
IDENTIFIED BY password_on_db2
USING 'TNS_ALIAS2'3) Assuming the database link is in place
SELECT *
FROM schema2.table_name@to_db2Justin -
Select from two tables and insert into a third
I'm trying to do a select from two tables and do an insert into a third table from the two resulting columns.
I have the following....
DECLARE
tempsid number;
temphostid number;
BEGIN
select "DBSID_ID","ID" into tempsid,temphostid from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" ("SIDLOOKUP_ID", "SERVERLOOKUP_ID")
values(tempsid, temphostsid);
END;
run;
I get the error ....
ORA-06550: line 11, column 18:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
1. DECLARE
2. tempsid number;
3. temphostid number;okay ... I tried a different way ...
DECLARE
a number;
b number;
BEGIN
select "DBSID_ID","ID" into a,b from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" (SIDLOOKUP_ID, SERVERLOOKUP_ID) values (a, b);
END;
and now it whines about ...
ORA-01422: exact fetch returns more than requested number of rows
Maybe you are looking for
-
i need help please post some answers
-
Started set up on ipad. When I went to second screen, showing list of more language preferences I accidentally touched portuguese and this must have replaced the default, ticked, English option. Next screen, localisation, came up (in Portuguese) but
-
How to create logical file name
Could some one tell me how to create logical file names in BW , and when to use the transaction SF01. Thanks
-
Webcenter dicussion forum - Ldap Group Integration with JSSO
Hi, We want to implement LDAP Group integration for the authorization purposes in webcenter Jive Disucussions deployed in our IAS 10.1.3.2 application server. Though jive provides support for the same, yet the JIve documentation says that we need to
-
Hi, Since I reinstalled a new HD in my old laptop (8 years old) I have a problem with my netctl-profile: in about 1 in 4 boots the wireless does not connect. I appreciate it if someone could take a look at what happens, because I cannot seem to find