Field Selection in Notification Location TAB.

Hi gurus,
I found setting of field selection for a Location tab of Notification in OIAZ.
My problem is i need to make more than one field as mandatory.
But when i try to make more than one the previosuly selected field status is changing to original.
can anyone give ur valuable comments

hi vijay,
as you said you can make any no of field mandatory in OIAZ i dont think there will be a problem ,i checked in my system its working fine, can you say which field you want to make mandatory.
regards
thyagarajan

Similar Messages

Field selection for Notification type

Hi all,
I have a configured a notification type. I want to hide unwanted fields . I checked for " Set Field Selection for Notifications" in spro but i am not able to find these fields.
The Fields are under below tabs
location Data Tab
1.Room-ILOA-MSGRP
2.Plant section-ILOA-BEBER
3.Business Area-ILOA-GSBER
Please guide how to hide theses fields
Anil Kumar

Hi Anil
I have not checked in SAP, butif the hiding of the fields in not possible through SPRO, then an easy way to hide fields is to use GUixT, which comes with std. SAP.
Regards
Manish Bansal

Custom fields on shipping notification (ASN) tab in PO.

Hello Guys,
We are on SRM_SERVER 550 service pack SAPKIBKT07.
We would like to add custom fields on the shipping notification (ASN) tab in PO.
To do so we had gone through the OSS Note: Note 672960 - User-defined fields 2.
But couldnt find the structure in which the custom fields can be added. More over we are not running on SUS.
Currently we are creating ASN through XI interface. Using Sproxy We had called the function module BBP_DDN_UPDATE to create the ASN.
Do let us know if any details are needed.
Appreciate your help.
Thanks,
Rama

Hi Rama
Please check this out
You can add custom fields in a separate tab in header using the below 2 BADIs.
1. ME_GUI_PO_CUST
2. ME_PROCESS_PO_CUST
For above BADI's create screen ...and assign the screen group and screen no for that implementation....
Please take help of Good Technical ABAP resource
Below example may not be directly relevant but you can work on this guidelines
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group description
zs creating badi --- (save)
click on (label tab pages) u2013 new entries
number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS
(desc u2013 impl for cust) u2013 (save)
interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
-- (activate) u2013 (back)
Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS1
(description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
(save) --- (activate)
6)(SAVE) --
Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
Goto SE51 -- Prog : ZQW
Screen : 200 (Create)
Goto layout u2013 design the screen
7)save u2013 activate
then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler

Field selection for Account Assignment Tab in PR

I set up my own field selection key where only storage location can be changed after release.
But when I do the test, I found that not only the storage location field but also all the fields in Account Assignment Tab can be changed!!! (Like cost center, profit center and GL account etc)
So, please help me to control the fields in Account Assignment Tab. I can't find related setting.
Thanks a lot.

You guys misunderstood.
Here's my business flow:
I enter PR with account assignment K, input cost center and then save.
After PR is released, there's only storage location can be changed.
So I set up my own field seletion key in which I set storage location as optional, and other fields as display.
But when I use ME52N to check my released PR, not only storage location but also all the fields in Account Assignment Tab can be changed!
I can't find the corresbonding setting for cost center or GL account in "Define Screen Layout at Document Level".
I can't use OME9 either, because once I set cost center as display, I have no change to enter even if I use ME51N.
Sorry I didn't make myself clear enough. Hope you understand now and please help me to solve it. Thanks a lot.

Notification field selection

Hi,
I am looking to understand the way of defining field selection for notification.
I have arrived to the IMG activity in which I can, probably, customize the field selection but I could not find the simple way of doing it for notification type.
Could anyone give me a hint (or even more than that) where I can find the documentation of how to customize it?
Best regards
Shlomo

Hi shlomo
This is kalyan, IMG activity is the general settings for Notification, There you can select fields for Notification type. you can not find Documentation for that as per the client requirement we have to drill down the IMG path.
I think it may help you
Regards
kalyan

Field selection for movement type 601 account 894025 differs for cutomer

While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
Rajiv

Hi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv

Set Field Selection for Completion Confirmation

I want to change the indicator of one field from "ready to input" to "required"..But i couldnt understand exactly the hierarchy under "Set Field Selection for Completion Confirmation" tab in SPRO. there are 3 parts under that tab;
1-PM: Confirmation - initial screen
2-PM: Confirmation - list and detail
3-PM: Confirmation - parameter
and i also couldnt find the name of my field which is about "codes for causes"..
Thanks...

Russ,
I don't think it could be accomplished through configuration or through Transaction variants.
I think the simplest way to accomplish this would be by using one of the below user exits according to your needs.
CONFPM02: Customer-specific entry checks 1
CONFPM03: Customer-specific check by operation selection
CONFPM04: Customer-specific entry checks 2
The other option would be to use the Implicit enhancement functionality(If you are in EC C6.0 or above) to modify the table control field attributes dynamically.
Regards
Narasimhan

SAPLMEPO control accounting tab field selection

The requirement has been given that when a PO is created with reference to another document that the accounting should not be able to be changed. On the surface this seems like a simple requirement. However I have yet to find a solution. Standard field selections seem not to show the accounting fields. The BADI ME_PROCESS_PO, which does cover modification of the accounting fields, is not open for customer implementation and the BADI ME_PROCESS_PO_CUST does not cover field selection for for accounting fields.
So am I forced to do an implict/explicit enhancment to LMEPOF3I?

You guys misunderstood.
Here's my business flow:
I enter PR with account assignment K, input cost center and then save.
After PR is released, there's only storage location can be changed.
So I set up my own field seletion key in which I set storage location as optional, and other fields as display.
But when I use ME52N to check my released PR, not only storage location but also all the fields in Account Assignment Tab can be changed!
I can't find the corresbonding setting for cost center or GL account in "Define Screen Layout at Document Level".
I can't use OME9 either, because once I set cost center as display, I have no change to enter even if I use ME51N.
Sorry I didn't make myself clear enough. Hope you understand now and please help me to solve it. Thanks a lot.

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Field selection in SPRO of Relationship tab in Work Order

Hi,
How to make fields visible/invisible of Relationship tab (if there are any other than the visible ones as default). The tab is seen upon clicking of General button in Operations tab of Work Order iw31.
Thanks
Faisal

Relationships are specific to operations, so of course, you should see by selecting each operation separately.
There are standard fields available, on those, you can hide or make visible. If you want to add new fields which are not standard, there are some screen exits. You may use those to add the fields.
But I am not sure you can add fields in Relationship matrix. You can use field key to add required fields against each operation.

Requirement to add new field in Location Tab of Service order

We have a requirement in which it is needed to add anew field in Location Tab of Equipment and Service order. For Equipment part , we have added the field via Enhancement ITOB0001 and activating the field via "Set View Profile for Technical Objects".
But for Service order part, we are not able to add the new field in the Location tab , please suggest how can we achieve this.

Hi Deepika,
If you are not particular about having it in Location tab use Screen-Exit provided in the Enhancement IWO10018 to add an additional tab to host your custom fields. as under:
ABAPer will be able to readily follow these steps
Steps will be,
1. Create a Data type to capture the your custom values. (SE11)
2. Include your Zfield (with this datatype) through in the include structure CI_AUFK of the Order Header table (AUFK)
3. Create a project with Tcode CMOD and assign the enhancement above (IWO10018)
4. Go to Components and Click on Screen Exit
5. Here Go to Screen-painter (Blue Arrow named Layout) , Create your Field screen-box, field Text field and field Input field. In the field input field Name you should use the above Zfield details (table-field)
6.Activate the project CMOD and come-out.
Run IW31, you will see an additional tab like shown above. But here the field is nothing.
We haven''t told the system what is to be filled here.
For this in continuation to the above steps between 5 and 6, insert this step.
5a. Write your code in Function Exits : EXIT_SAPLCOIH_018 and EXIT_SAPLCOIH_019 of the same enhancement (IWO10018.)
Code to be written in exit 18:
move-corresponding COCI_AUFK_IMP to AUFK.
Code to be written in exit 19:
move-corresponding aufk to COCI_AUFK_exp.
After this exercise your Z-field will be visible in the Enhancement Tab as shown in the picture in the beginning. Now your values will be saving to AUFK table.
So, this is completely an ABAPer job.
Hope this information helps you.
Jogeswara Rao K

Influencing factor Plant for Notification Field selection.

Dear Expert,
                 I want to make Malfunction Start Field to be display only (Not modifiable)Plant Specific.
I am using same notiification Type for 2 Plants and so I want to Make Malfunction Start field non-modifiable for one plant and modifiable for Other.
                 For Notification Field selection there is Influencing Field as Notification Type but not Plant ( Maintenance or Planning).
                 How I can address this issue.
                 Please suggest any BADI if possible.
With best regards,
Narendra

Hi shlomo
This is kalyan, IMG activity is the general settings for Notification, There you can select fields for Notification type. you can not find Documentation for that as per the client requirement we have to drill down the IMG path.
I think it may help you
Regards
kalyan

Displaying the Temp. at different location by selecting in front window tab

hi,
i am trying to develop a system to displaying the tempurature as well as control. please find the attached picture file to give a better view regarding my quastion.
this program contain few tabs.
page 1- page which is the user will select the location of thermocouples. once the thermocouple location selected, the selected name will be used as a reference in logging TXT file as a header of the coloum.
page 2,3,4,5 and 6 - page which will display the selected tempurature
problem:
the agilent data logger has only 40 thermocouple logging capability. the system will have about 80 to 90 thermocouple locations. so the user will select different thermocouple location at beginning of the testing for given thermocouple.
for example:
if the user select the thermocouple 1 is assign to location T1 - 3 then the reading of thermocouple 1 should display on the page 3 at correct location. on the next test the thermocouple1 could change to T1 - 8.
this few days i spend good couple of hours on this problem and the solution still some where in the sky!!!! or no solution for this problem.
Attachments:
page 1.jpg ‏192 KB
page 3.jpg ‏182 KB

Hello siva,
here comes an example... (LV7.0)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Select_Indicator.vi ‏21 KB

How do I resolve: Field Selection dialog [Pick... button] in "Mark as read-only" section of Signed tab for Digital Signature field is not working

I am using Acrobat Pro X on Windows 7 Enterprise x64 to create a form. When I have a simple form with a few fields, I am able to use the "Pick..." button to select the fields I want to select, but in a more complex form (20 fields with 3 Signature fields) The Field Selection dialog does not work. I can make the selections, but they are not saved. Removing fields does not resolve issue. IF I start with a blank form and add a few fields, the dialog will work, but after adding more, it quits working. Reader XI is also installed.

And that is why many responders use only the custom JavaScript calculation option.
The UI for the select fields and simplified field nations are only a way to pass field names to a JavaScript function that performs the actual calculation. Sometimes these functions call other functions and pass the parameters can lead to errors in the attempted code.
I would start to learn code JavaScript for Acrobat.
The pick field dialog is for performing calculations involving sums, products, averages, minimum, and maximum. I am not sure how that would work with a digital signature. Once a signature is applied the form fields could be locked.

Reference object data update in Location tab page of order

Hello
When a reference object in notification/order is changed, the location and account assignment data is updated in order location data by standard settings in SAP but any changes to the master data of the existing reference object is not changed in Notification/Order location tab page.
But there is an option that when you change the data in the technical object and you need the same to be reflected in order location data for which this order has the reference object, we can use the functionality of clicking the right mouse in object list and so the data will be updated in notification/order.
Please explain how to carry out this step "of clicking the right mouse in object list and so the data will be updated in notification/order"..
I have changed the Location data/Account assignment data of techincal object in its master data and now i want that to reflect in Work order.
How to achieve this??

Hi,
Keep the cursor in Equipment field & right click the mouse. You can find the option Update Reference Object Data.
Select that option, you will get updated details in the Notification / order.
Regards,
Maheswaran.

Field Selection in Notification Location TAB.

Similar Messages

Maybe you are looking for