Field Selection in Service Entry Sheet

I want to restrict the user to make any changes in the WBS element field while creating the Service entry sheet for a service PO. Can someone guide me on the same.
Regards,
Ashish

hi,
go to SPRO- MMExternal Service Managementdefine screen layout-go to t code ml81-details scren-additional data- then mark wbs field as display
then when u create the service entry sheet in ml81n, this field will come in display mode, then, users cant change the field.
if helpful, rewards point
regards,
susanta
Edited by: susanta bindhani on Jun 24, 2008 9:34 AM

Similar Messages

  • Field Mandatory in Service Entry Sheet

    Dear all
        Kindly let me know How to Make the following Field Mandatory in Service Entry Sheet
    "Quality of service" & "Service timeliness"  in Vendor Evaluation Tab

    hi
    MM->ext ser mangmt->define screen layout->
    go to field selection key ML81
    in that go to Entry sheet (field sel group)option
    there u will find vendor evaluation options
    there u acn set as mandatory .
    ok
    if its ok
    assign points
    nani

  • Personnel number field mandatory in service entry sheet

    Hello,
    My FI team has made the personnel number field mandatory in FSTV for GL.
    Now when i am making a service entry sheet this is creating a problem with error "Field selection personnel number mandatory for GL account XXXXXX".
    How can i map this in MM module.
    Regards
    Vijay

    Hi,
    Check this note
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=324163
    Raise to SAP masy be some product error

  • How to make Fields mandatory in service entry sheet

    Dear Experts,
    I need to make  "Quality of Service" and "Service Timeliness" fields mandatory for user entry  in VENDOR EVALN tab during Service Entry Sheet.
    Kindly help..

    Check the note attached to the configuration node.
    + for required (mandatory) field
    . for optional field
    - for hide
    for display
    Double click on the line showing ...+++...
    It will open up a list of fields grouped logically and you now have a radiobutton style way of changing status.

  • Vendor evaluation tab in service entry sheet

    Hi All,
    Can any one please help me out to configure the vendor evaluation tab in service entry sheet T code ML81N.  Already done the field setting for service entry sheet and maintained the Purchasing Organization Data in vendor evaluation.
    Regards
    MG

    Hi Guys,
    Thanks for your update. i have refered the above mentioned note, but is it possible to show more than two subcriteria in the vendor evaluation tab in service entry sheet.
    For example i have a criteria like below
    Criteria                               Sub criteria                 Scoring mentod
    Manpower Skill                  Deployment                        C
                                              Competence                       D
                                              Training                              C
    So now my doubt is how can i get all the above three sub criteria in the vendor evalution tab in ML81n. I am getting the first two sub criteria.
    Is there any other way to do it like user exit any enhancement etc.
    A urgent reply shall be highly appriciated.
    Thanks
    MG

  • Supress Mandatory field for Service Entry Sheet Creation

    Hi,
    I am using BDC for Service Entry Sheet creation as BAPI cannot fulfill the Business needs.
    During Recording when I click on Service Overview and click on Service Selection we provide the Model Service Specification Number there I can see the Services and select it, but when I select the service and adopt, an error message ocuured to enter the quantity.
    Is there any way to supress the standard error message without using acess Key.
    BR
    Aviram

    Hi Aviram,
    Messages type 'E' , 'I' or 'W' are controlled through configurations. Please check with your functional consultant with the message number you want to supress. It can be made as 'I' or 'W' through configuration.
    Similarly if you do not want that particular field as mandatory field ask functional consultant to make it optional.
    Regards
    Sachin
    Edited by: sachin G patil on Mar 9, 2011 3:13 PM
    Edited by: sachin G patil on Mar 9, 2011 3:20 PM

  • Service entry sheet creation from PO without selecting line item of PO?

    Dear SAPIENTS,
    While creating service entry sheet for one frame work order (PO) i do not want to select line item of PO. I want all the service of PO line item should come automatically in single service entry sheet number.
    At present whenm i enter the PO number its taking line item 10 as default because of this service of that line item is coming and for every line item i have to create different service entry sheet.
    Regards,
    Kaushal Rai

    Hi,
    in ML81N please enter the entry sheet header data, then go to full screen services, push the button for
    "service selection" and after that  a popup appeares for the service selection (SAPLMLSP
    0500). On the bottom of this popup you have the button "complete" = adopt all = F9. If you hit this
    button all of your services within the service specification will be copied into the entry sheet
    at the same time.
    Regards,
    Edit

  • How to block WBS or Network element field in Service Entry Sheet ML81n

    Hi Guru
    Would like to seek your advise on the following query.
    We use Service master to trigger Purchase Order Service related (Item category = D; AAC = P).
    Then, user will use T\code ML81n to create service entry sheet by reference to Purchase Order and service master document. During Service entry sheet creation, usually WBS element or Network element field will be populated automatically based on the information from Purchase Order.
    However, user could overwrite the WBS element or Network element in service entry sheet. Thus, it creates discrepency WBS\Network element between PO and Entry Sheet.
    1. Is there any way we could retrieve Service entry sheet not to allow user to update the WBS\network element field?
    2. What will be the impact if we block the field from user.
    Please advise

    Hi Rag
    Thanks for your reply.
    When I trace the service master, there is no specify field to input WBS element.
    Also, I have checked the service master entered by user, it seems that only the following fields are filled:-
    Service Category
    BuoM
    Mat\Service Group
    Valuation class
    The rest of field are remained as blank as it might due to multiple WBS element shared 1 same service master
    Please advise how I should block the WBS element from service entry to prevent overwriting.
    Thanks

  • Service selection tab in Service entry sheet

    Hi,
    When i am trying to create Service Entry Sheet using ML81N, service selection tab is not displayed at the bottom.
    So i am not able to adopt the services from PO.
    This is working fine in dev and prd, but the problem is with qas.
    please let me know what could be the reason.
    Thanks.

    Guys,
    this is the problem raised from client side,
    we didnt observe since how long this problem persists only in qas.
    Basic things like authorization, entering for correct PO....i have taken care off.
    And i checked there is no transaction variant also for this ml81n.
    There is no BADI implementation also reg this function/
    I am not sure, what else i left,
    please if anyone faced similar problem, let me know the solution.
    thank u all for ur time.

  • Fields which are possible 4 change in a service entry sheet after approval

    Dear Guru's,
    I find that after a service entry sheet is approved (automatic GR is done at this stage as well), there is not even 1 field which can be changed. Is there a way to make some fields changeable without going through the reversal process or cancelling the GR and cancelling the approval in the service entry sheet? Im looking to change the Header Short Text (Field Name = TXZ01). Is this possible ?
    Thanks in advance..

    Hi,
    After approval of a SES, no changes can be done further.  if you want to make any changes first reverse the acceptance. 
    regards
    alexandro

  • Mandatory field in Service Entry Sheet

    All,
    While doing Service Entry sheet without service Master , it is saying Service Number is a mandatory field , How to remove this from Mandatory to Optional ?
    Kindly advise.
    regards

    Hi,
    In service entry sheet,service number is not required.But it required when u didn't assign Account assignment catoagory.
    So u try to assign Account assignment category,then system doesn't ask u the service number.
    Thnaks & Regards
    Suresh
    > All,
    >
    > While doing Service Entry sheet without service
    > Master , it is saying Service Number is a mandatory
    > field , How to remove this from Mandatory to Optional
    > ?
    > Kindly advise.
    >
    > regards

  • Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

    Dear All,
    We need a suggestion/solution for the following problem :-
    Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
    Account Assignment Category was P-Project
    The WBS element was entered as the Accounts Assigment Category was P.
    The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
    The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
    Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
    1. Through T-code ZML81N the end user is able to create and save the SES.
    2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
    Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
    FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
    Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
    The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
    We have already escalated it to SAP.
    Thanks in advance
    Anil Shanbhag

    Hi,
    Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
    If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
    NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with  Program RM07CUFA
    Regards,
    Biju

  • Error while saving service entry sheet

    Hi Gurus
    I m getting the following error while saving service entry sheet
    Account determination for entry MGCA WRX not possible
    Req. for help
    Eldee

    Hi,
    Use T.code:OMWB,
    Enter Chart of Account,Now you will have new screen,
    Click WRX, sys will take to new screen
    Click Rules,select check box of debit and credit only and save.
    Now enter you G/L accounts(GR/IR) in debit and credit field and save.
    Now try your transaction.
    If helpful to you then reward.
    Regards,
    Biju K

  • Pricing of Service Entry Sheet is not coming in editable mode in ML81N

    Dear Friend,
    I am trying to create a Service Entry Sheet in ML81N where selecting the red button for Condition where itu2019s all coming in display mode where as I have maintained some Z Condition to put the value or % wise.
    Client requirement is put some % or value, if they want to deduct from the price from Gross Price. Though I can see that all the condition is flowing but in display mode, but there I want to select the Condition type and put it % or value.
    *I have checked in configuration in SPRO>External Service Management>Pricing Condition and seen there standard procedure is there MS0000 where I have maintained one new ZCON, but I am not able to put the value while doing service entry sheet as displaying mode only in ML81N. *

    Hi,
    the price chang emust be allowed in the corresponding PO service item on services detail, in field Price Change in Entry Sheet in case of planned services. When you create your SES against a PO with contract limits, then please set the same indicator in the contract service item.
    Regards,
    Edit

  • *Unable to create Service Entry Sheet.*

    Hi,
    Iu2019m trying to create service entry sheet for a service PO but all the item level fields in ML81N screen are appearing in display mode (non-editable) also I cannot see the u201CService Selectionu201D button. So Iu2019m unable to insert/select the service detail and cannot create the entry sheet. If I use the menu path Edit->Service Selection, still cannot adopt services and system gets busy for a substantial period and eventually timed out.
    Please helpu2026
    Iu2019m using ECC 6.0
    Thanks, Pratap

    Service PO: Intangible good that is the subject of business activity and that can be performed internally or procured externally (outsourced).
    -     Services are regarded as being consumed at the time of their performance. They cannot be stored or transported.
    -     Examples of services include construction work, janitorial/cleaning services, and legal services.
    Steps involved in Service PO:
    1.     Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
    2.     Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
    Without Validation, Acct. Category Reference & Service Category Description.
    3.     Define Number Ranges for Service Category.
    4.   Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
          Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.  
    5.     Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
    6.     Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
    7.     Then do MIRO from PO reference u2013 Service Entry sheet.
    8.     Collective Release of Service Entry Sheet u2013 ML85
    Organizational Status for Service Category: The organization status indicates the areas in which service master records are used.
    Service Category: The service category is the most important criterion for structuring service master records. It provides a default value for the valuation classes. Service master records can be assigned to number ranges on the basis of the service category.

Maybe you are looking for