Field separated after Flash export ?

hello everybody, i have a PAL DVD project, all the materials are output from CG, so they are Frame Base(progressive), but after i exported to Flash, all the video content became jaggy, looks like they have only one of the field information(field separated), why? and how can i make a progressive Flash export? THANKS
ryandrew

Me too. I originally started this thread because I didn't see yours.
Will Flash export (Dropped fields) be fixed in next version of CS4?
Any fix other than exporting out of AE or something like that?
Thanks!

Similar Messages

  • Problem encountered after Flash export

    Hello,
    I am encountering a problem after exporting to Flash from Adobe Encore CS6.
    After finding the possibility to export to Flash, I did use it in a project made of 4 different "exports", based on the same animated menu, same buttons, and with only 2 videos changing within it. (it is for an exhibition, use on LCD Smart Screen, 4x2 different videos showing, same menu, touchscreen).
    Three on four of my exports work perfectly. Each time I just changed the link of the two buttons linked to my videos, Build it to Flash and everything was fine. I just did 4 times the same thing.
    My problem occured for only one of the export, and did occur each time I was trying a new preset for encoding, exporting or whatever.
    This is the message I get while trying to open the FlashDVD.swf file, once built.
    TypeError: Error #1090: XML parser failure: element is malformed.
              at EncoreSWF/OnAuthoredContentLoaded()
              at flash.events::EventDispatcher/dispatchEventFunction()
              at flash.events::EventDispatcher/dispatchEvent()
              at flash.net::URLLoader/onComplete()
    I believe this is something somebody might understand, as it refers to specific instructions, but I am not able myself to understand it. I am an editor working in Premiere/After Effects, and Flash is all new to me.
    I tried to export my original assets in 4 different format, including FLV to avoir encoding within Encore. I relinked them each time in the same way. I even disabled, then get rid of the subtitles originaly on the subtitles tracks, thinking that it could be a problem. 
    This is very annoying as I don't know now how to reproduce the exact same menu for the exhibition, since only this last one do not work. If you understand what this error message means, it would very helpful to receive your input.
    Thanks a lot,
    Charlelie (Belgium)

    I'm with the same problem, and trying to solve it... any news i'll repply..
    regards.

  • Flash Export missing from my CC 2014 After Effects, Why?

    I not seeing any Flash export options in my new CC 2014 After Effect program, why, was this remove from the new version?
    Thank

    See this:
    removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro

  • How to get some character as a field separator while in GUI_DOWNLOAD ?

    Hi Friends,
    I have to download data from an internal table to a text file. The field separator
    between the fields should be comms (,). So, after getting the data into internal table i'm calling the Function Module GUI_DOWNLOAD. Now using this function module can i insert a comma spearator between the fields, if not what is the other way to do it?

    Hi,
    Its not possible to give the field separator as ',' directly with gui_download from you internal table.
    Below is the example through which you can achieve the following,
    this is a tested program and is working fine on the system....
    so you can use the logic to achieve the following result.... hope this logic helps you to achieve your functionality....
    DATA:
    BEGIN OF fs,
       col1(6) TYPE c,
       col2(4) TYPE c,
       col3 TYPE c,
       END OF fs.
    DATA :
    BEGIN OF line,
    line(255) TYPE c,
    END OF line.
    DATA: itab LIKE TABLE OF fs,
          itab2 LIKE TABLE OF line.
    DEFINE m_tab.
      clear fs.
      fs-col1 = &1.
      fs-col2 = &2.
      fs-col3 = &3.
      append fs to itab.
    END-OF-DEFINITION.
    m_tab '006000' '0010' 'J'.
    m_tab '006000' '0010' 'J'.
    m_tab '006000' '0010' 'M'.
    m_tab '006000' '0010' 'M'.
    m_tab '006000' '0010' 'O'.
    m_tab '006000' '0010' 'O'.
    m_tab '006000' '0010' 'T'.
    m_tab '006000' '0010' 'T'.
    LOOP AT itab INTO fs.
      CONCATENATE fs-col1
                  fs-col2
                  fs-col3
             INTO line
    SEPARATED BY ','.
      APPEND line TO itab2.
    ENDLOOP.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        filename                        = 'C:\filename.txt'
    *   FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
    *   WRITE_FIELD_SEPARATOR           = ' '
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    *   WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
    *   SHOW_TRANSFER_STATUS            = ABAP_TRUE
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        data_tab                        = itab2
    *   FIELDNAMES                      =
    EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       OTHERS                          = 22
    IF sy-subrc <> 0.
      WRITE sy-subrc.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Siddarth

  • Mail / Merge in WORD  with DOI. Error in WORD 'field separator'

    I have a program that creates   WORD DOcuments  for merging with data.
    I use  WORD documents created with BDS.
    I used  program   SAPRDEMO_MAILMERGE_INTERFACE as an example for creating my own program.
    When I call METHOD VIEW  ,after creating data source and MERGE, I get following error in WORD
       'field separator?.  WORD asks which is the separator for field.
    whatever  separator I indicate,  WORD issues an error saying    no record found.
    If I execute program   SAPRDEMO_MAILMERGE_INTERFACE,  it  works.
    I don't understand what happens.

    I found solution.
    In my data source , I have only 1 record.
    When calling  method merge_range  I must indicate 0 in record number  and not 1 ( with 1 it worked on our system but not on the customer system : cause in  SAP or EXCEL I don't know. )
    Fusion  données  source
          CALL METHOD HANDLE->MERGE_RANGE
            EXPORTING
              FIRST   = 0
              LAST    = 0
            IMPORTING
              ERROR   = error
              RETCODE = retcode.
          clear l_sy.
          CALL METHOD ERROR->GET_MESSAGE
            IMPORTING
              MESSAGE_ID     = l_SY-MSGID
              MESSAGE_NUMBER = l_SY-MSGNO
              PARAM1         = l_SY-MSGV1
              PARAM2         = l_SY-MSGV2
              PARAM3         = l_SY-MSGV3
              PARAM4         = l_SY-MSGV4.

  • Error: Expected a field name after '.' operator

    I'm trying to use a "for" loop to add an "onRelease" handler
    to my symbols using the following code, but I get error that says:
    Expected a field name after '.' operator. Any idea what's wrong and
    how I can fix this?
    for (i=1; i<10; i++) {
    thumbs_mc.this["thumb"+i].onRelease = function() {
    // do something
    Thanks
    Saeid

    Hi, I was trying to convert my Flash 8 file to Flash Lite 1.1
    and came upon an error, like this :
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line 3:
    You must export your movie as Flash 5 to use this action.
    globalStyleFormat.applyChanges("textFont");
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line 5:
    You must export your movie as Flash 5 to use this action.
    x= StartTheQuiz();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    23: You must export your movie as Flash 5 to use this action.
    PickAnEasyQuestion();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    28: You must export your movie as Flash 5 to use this action.
    function PickAnEasyQuestion() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    96: You must export your movie as Flash 5 to use this action.
    _root.Button1.onRelease = function() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    100: You must export your movie as Flash 5 to use this action.
    MoneyGoesUp();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    102: You must export your movie as Flash 5 to use this action.
    WrongAnswer();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    106: You must export your movie as Flash 5 to use this action.
    _root.Button2.onRelease = function() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    110: You must export your movie as Flash 5 to use this action.
    MoneyGoesUp();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    112: You must export your movie as Flash 5 to use this action.
    WrongAnswer();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    116: You must export your movie as Flash 5 to use this action.
    _root.Button3.onRelease = function() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    120: You must export your movie as Flash 5 to use this action.
    MoneyGoesUp();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    122: You must export your movie as Flash 5 to use this action.
    WrongAnswer();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    126: You must export your movie as Flash 5 to use this action.
    _root.Button4.onRelease = function() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    130: You must export your movie as Flash 5 to use this action.
    MoneyGoesUp();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    132: You must export your movie as Flash 5 to use this action.
    WrongAnswer();
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    137: You must export your movie as Flash 5 to use this action.
    function MoneyGoesUp() {
    **Error** Scene=Scene 1, layer=ActionScript, frame=14:Line
    196: You must export your movie as Flash 5 to use this action.
    function WrongAnswer() {
    Total ActionScript Errors: 18 Reported Errors: 18
    I was wondering if you know the solution to this.

  • IPhone is at a grey screen after flashing for a few minutes

    My iPhone is at a grey screen after flashing at the same screen for a couple of minutes.
    I can turn my screen on and off, phone functions and siri both work. The screen is just grey, no error messages or anything.
    This happened after I was trying to connect to a wifi hotspot and I was typing something into a field when it froze, flashed for a few minutes, and stayed on a grey screen. This has been going on for about an hour and a half.
    Any help would be greatly appreciated.

    Hi Brialex119,
    If your iPhone is flashing with a grey screen, I would suggest resetting the device and resetting the network settings.  If that does not resolve the issue, then you may need to back up to iCloud and restore it.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201559
    iOS: Wi-Fi settings grayed out or dim - Apple Support
    https://support.apple.com/en-us/HT204324
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    https://support.apple.com/en-us/HT203977
    Regards,
    - Judy

  • Issue with field separator in GUI_UPLOAD

    Hello Gurus
    I am facing issue with gui_upload. I have a text file in which the fields are eparated by single Pipe  i.e |. Now when I try to read the data from file in internal table even with using field separator it does not insert data in proper fields.
    DATA: BEGIN OF IT_TAB OCCURS 0,
          OBJECT_ID type string,
          VERSION_SERIES_ID TYPE string,
          VERSION_NUMBER TYPE string,
          REVISION TYPE string,
          DOC_NUMBER TYPE string,
          DOCTITLE TYPE string,
          FILESIZE TYPE string,
          MIME_TYPE TYPE string,
          PLANTUNIT TYPE string,
          END OF IT_TAB.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = w_mpath
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = '|'
      HEADER_LENGTH                 = 0
       READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
      VIRUS_SCAN_PROFILE            =
      NO_AUTH_CHECK                 = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      TABLES
        DATA_TAB                      = it_tab[]
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    I want the data to get appended in internal table based on | separator.
    Please help.
    Regards,
    Rajesh.

    Hi,
    I believe the field separator parameter will work for Excel files..You have to get the internal table in a string format..and then use split statement..
    check this example..
    DATA: BEGIN OF it_tab OCCURS 0,
           object_id TYPE string,
           version_series_id TYPE string,
           version_number TYPE string,
           revision TYPE string,
           doc_number TYPE string,
           doctitle TYPE string,
           filesize TYPE string,
           mime_type TYPE string,
           plantunit TYPE string,
         END OF it_tab.
    DATA: t_tab   TYPE TABLE OF string,
          v_string TYPE string.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = 'C:\TEST.TXT'
    *    has_field_separator     = '|'          "Actually not required.
      TABLES
        data_tab                = t_tab
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    IF sy-subrc <> 0.
    ENDIF.
    LOOP AT t_tab INTO v_string.
      SPLIT v_string AT ','
            INTO
            it_tab-object_id
            it_tab-version_series_id
            it_tab-version_number
            it_tab-revision
            it_tab-doc_number
            it_tab-doctitle
            it_tab-filesize
            it_tab-mime_type
            it_tab-plantunit.
      APPEND it_tab.
      CLEAR: it_tab.
    ENDLOOP.
    Thanks
    Naren
    Edited by: Narendran Muthukumaran on Oct 15, 2008 4:58 PM

  • Field separator in TEXT_CONVERT_TO_XLS_SAP

    Hi all
    what is the purpose of field separator in FM TEXT_CONVERT_TO_XLS_SAP.what are the possible values to be given for that field separator???????
    what values do i have to give for tab limited
    points will be rewarded

    Hi,
    please check this
      data : lt_raw             type truxs_t_text_data.
      call function 'TEXT_CONVERT_XLS_TO_SAP'
        exporting
    *      i_line_header        = 'X'
          i_tab_raw_data       = it_raw       " WORK TABLE
          i_filename           = p_lname
        tables
          i_tab_converted_data = i_tab      "ACTUAL DATA
        exceptions
          conversion_failed    = 1
          others               = 2.
    aRs
    Message was edited by:
            a®

  • Field Separator in GUI_UPLOAD

    Hi,
         I need to upload a tab delimited excel file . I am using FM GUI_DOWNLOAD.What are Filetype and Field Separator.
    Regards,
    Divyanshu

    Hi Divyanshu,
    It may be better to use the class method to future proof your development (which incidentally calls GUI_UPLOAD anyway). Consider the following code:
      data: i_file type standard table of t_file.
      call method cl_gui_frontend_services=>gui_upload
        exporting
          filename                = w_file
          has_field_separator     = 'X'      "Tab-delimited ASCII upload.
        changing
          data_tab                = i_file
        exceptions
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          not_supported_by_gui    = 17
          error_no_gui            = 18
          others                  = 19.
      if sy-subrc <> 0.
    *   Error handling
      endif.
    Hope this helps.
    JB

  • How to get field separator in flat file using GUI_DOWNLOAD function

    hi,
    how to get field separator in flat file using GUI_DOWNLOAD function.
                                    thanking you.

    Hi,
      Use WRITE_FIELD_SEPARATOR = 'X'.
      Check this sample code
    REPORT  z_file_download.
    DATA: w_name(90) TYPE c.
    DATA:
      BEGIN OF fs_flight,
        carrid   LIKE sflight-carrid,
        connid   LIKE sflight-connid,
        fldate   LIKE sflight-fldate,
        price    LIKE sflight-price,
        currency LIKE sflight-currency,
      END OF fs_flight.
    DATA:
      BEGIN OF fs_head,
        carrid(10) TYPE c,
        connid(10) TYPE c,
        fldate(10) TYPE c,
        price(10) TYPE c,
        curr(10) TYPE c,
      END OF fs_head.
    DATA:
      t_head LIKE
       TABLE OF
             fs_head.
    DATA:
      t_flight LIKE
         TABLE OF
               fs_flight.
    fs_head-carrid = 'CARRID'.
    fs_head-connid = 'CONNID'.
    fs_head-fldate = 'FLDATE'.
    fs_head-price  = 'PRICE'.
    fs_head-curr   = 'CURRENCY'.
    APPEND fs_head TO t_head.
    SELECT-OPTIONS:
      s_carrid FOR fs_flight-carrid.
    START-OF-SELECTION.
      SELECT carrid
             connid
             fldate
             price
             currency
        FROM sflight
        INTO TABLE t_flight
       WHERE carrid IN s_carrid.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                  =
        filename                      = 'D:\flight.xls'
       FILETYPE                      = 'ASC'
    *   APPEND                        = ' '
        WRITE_FIELD_SEPARATOR         = 'X'
    *   HEADER                        = '00'
    *   TRUNC_TRAILING_BLANKS         = ' '
    *   WRITE_LF                      = 'X'
    *   COL_SELECT                    = ' '
    *   COL_SELECT_MASK               = ' '
    *   DAT_MODE                      = ' '
    *   CONFIRM_OVERWRITE             = ' '
    *   NO_AUTH_CHECK                 = ' '
    *   CODEPAGE                      = ' '
    *   IGNORE_CERR                   = ABAP_TRUE
    *   REPLACEMENT                   = '#'
    *   WRITE_BOM                     = ' '
    * IMPORTING
    *   FILELENGTH                    =
      tables
        data_tab                      = t_head
    EXCEPTIONS
       FILE_WRITE_ERROR              = 1
       NO_BATCH                      = 2
       GUI_REFUSE_FILETRANSFER       = 3
       INVALID_TYPE                  = 4
       NO_AUTHORITY                  = 5
       UNKNOWN_ERROR                 = 6
       HEADER_NOT_ALLOWED            = 7
       SEPARATOR_NOT_ALLOWED         = 8
       FILESIZE_NOT_ALLOWED          = 9
       HEADER_TOO_LONG               = 10
       DP_ERROR_CREATE               = 11
       DP_ERROR_SEND                 = 12
       DP_ERROR_WRITE                = 13
       UNKNOWN_DP_ERROR              = 14
       ACCESS_DENIED                 = 15
       DP_OUT_OF_MEMORY              = 16
       DISK_FULL                     = 17
       DP_TIMEOUT                    = 18
       FILE_NOT_FOUND                = 19
       DATAPROVIDER_EXCEPTION        = 20
       CONTROL_FLUSH_ERROR           = 21
       OTHERS                        = 22
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = 'D:\flight.xls'
          filetype                = 'ASC'
          append                  = 'X'
          write_field_separator   = 'X'
        TABLES
          data_tab                = t_flight
        EXCEPTIONS
          file_write_error        = 1
          no_batch                = 2
          gui_refuse_filetransfer = 3
          invalid_type            = 4
          no_authority            = 5
          unknown_error           = 6
          header_not_allowed      = 7
          separator_not_allowed   = 8
          filesize_not_allowed    = 9
          header_too_long         = 10
          dp_error_create         = 11
          dp_error_send           = 12
          dp_error_write          = 13
          unknown_dp_error        = 14
          access_denied           = 15
          dp_out_of_memory        = 16
          disk_full               = 17
          dp_timeout              = 18
          file_not_found          = 19
          dataprovider_exception  = 20
          control_flush_error     = 21
          OTHERS                  = 22.
      IF sy-subrc EQ 0.
        MESSAGE 'Download successful' TYPE 'I'.
      ENDIF.
      IF sy-subrc <> 0.
    *  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Two Flash export errors

    I've only recently started using Encore and am enjoying it so far.  The slide show feature appears to be a bit buggy, but the Flash export feature looked interesting so I gave that a try.  Creating the flash export was easy, but there were two errors in the code it generates.
    In index.htm I had to edit the parts shown the bold in the line-
    Original:
    <div style="border: 4px solid #000; width: 640px; height: 480px;"><object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="960" height="540" id="flashdvd" align="middle">
    Changed:
    <div style="border: 4px solid #000; width: 960px; height: 540px;"><object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="960" height="540" id="flashdvd" align="middle">
    I was exporting as a 960x540 video.  Before the change the video was displayed right of center.  After, it was centered.  In the preview of the template the video was centered.
    Also, the three png files in the Sources folder had to be renamed to remove the space in the file name.  I was not able to upload those files to my web server.  I had to change the references to those files in the AuthoredContent.xml file.
    Anyway, you may have the same problem, and maye the right people will see this and fix it.

    Hey Neil,
    Thanks for replying. When I author DVD's, I use the basic encoding standards you listed above.
    In this case, since the output is not written media, I was encoding in a way that would give me the best possible results (in theory at least) when planning on flv being the final encoded output, where lowest possible file size with best possible quality is the goal (since it's home will be on the web, not a DVD).
    As for my issue with the errors generated from the Export to Flash option, I have learned some things, and was able to successfully Export to Flash.
    One thing is that apparently the Flash encoder that EncoreDVD CS3 uses is not the same as the Adobe Flash CS3 Video Encoder or whatever Flash encoding engine Premiere uses. Encore's Flash output settings are limited, and so are the results.
    What I had to do was export my PP CS3 projects to Flash using Adobe Media Encoder and update the XML that Encore spits out accordingly to point to my newly encoded flv's, replacing the flv's that Encore created... not a big deal, but one extra step and little more waiting time.
    Now, the results are stunning! And since I'm not comfortable in Flash CS3 or coding ActionScript, having Encore create the menu interface, with all the navigation and interactivity and such, for me was a big BIG plus!

  • Field Separator

    The Flat file(.txt) has 5 fields separated by vertical bars(|). this fils has to be uploaded using the FM 'UPLOAD'.
         Here the problem is, the internal table is not taking the individual field values, but it is taking the values of 2 or 3 fields into one field.
    Kindly guide me on this.
    I have also tried with 'ws_upload' and 'gui_upload'
    eg. of flat file, given below,
    500076|1003|01012005|31012005|8552000.00|8952000.00|22200|002|I
    500076|1004|01012005|31012005|2690000.00|2748000.00|88900|003|I

    Hi girish,
    1. Exactly for this purpose,
    i have developed an independent FORM
    where we give inputs
    a) file name (eg. abcd.txt)
    b) separator (eg | in your case)
    c) internal table (eg. t001)
    2. It will provide the data
    in proper format
    (no matter what the separator)
    (it can work with any kind of separator)
    3. just copy paste in new program.
    REPORT abc.
    change your table declaration and file name
    DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
    PERFORM myupload TABLES t001 USING 'd:\t001.txt' '|'.
    BREAK-POINT.
    in debug see t001
    INDEPENDENT FORM
    FORM myupload TABLES orgtab
    USING filename separator.
    Data
    DATA : BEGIN OF itab OCCURS 0,
    myline(1000) TYPE c,
    END OF itab.
    DATA : extension(5) TYPE c.
    DATA : name(100) TYPE c.
    DATA : newfilename TYPE string.
    Step 1
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = filename
    TABLES
    data_tab = itab.
    Step 2
    LOOP AT itab.
    REPLACE ALL OCCURRENCES OF separator IN itab-myline WITH
    cl_abap_char_utilities=>horizontal_tab.
    MODIFY itab.
    ENDLOOP.
    Step 3
    DATA : path LIKE pcfile-path.
    path = filename.
    CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
    EXPORTING
    complete_filename = path
    CHECK_DOS_FORMAT =
    IMPORTING
    DRIVE =
    extension = extension
    name = name
    NAME_WITH_EXT =
    PATH =
    EXCEPTIONS
    invalid_drive = 1
    invalid_extension = 2
    invalid_name = 3
    invalid_path = 4
    OTHERS = 5
    Step 4
    newfilename = filename.
    REPLACE name IN newfilename WITH 'temp'.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    BIN_FILESIZE =
    filename = newfilename
    TABLES
    data_tab = itab
    FIELDNAMES =
    Step 5
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = newfilename
    has_field_separator = 'X'
    TABLES
    data_tab = orgtab.
    ENDFORM. "myupload
    3.
    regards,
    amit m.

  • Encore CS6 Flash Export problem, Grey screens

    Hi everyone,
    I am having a problem with my encore CS6 flash exports, they are not behaving as expected online (seems to be like a loading issue).
    I've tried exporting FLV and F4V and the problem is the same. The same project exported from CS5.5 does not produce this undesirable
    problem. It may be important to say that the project was started in CS5.5.
    I have a button that links to another menu, and I am using videos as 'transitions'. The videos are dynamic after effects compositions.
    When it's online, and you press the button it fills the canvas with a  'grey screen' before starting the video transition. This totally breaks
    the experience and feels like an authoring error. It would be important to note, that this screens only appear the first time you see the flash.
    Somehow the next time you press it doesnt show it.
    I would happily go back to CS5.5 but I started using auto-activate buttons that are only available on CS6 flash exports.
    Any ideas what has changed between this versions flash exports?
    Any help would be appreciated..
    Thanks in advance,
    Cris

    Encore CS6 6.0.2.004, IE9, Win7
    Simple project, DVD NTSC, One menu with one button. One timeline. Menu first play, button linked to timeline.
    Output flash with flv (and again with f4v - same results), No template, keep with flash swf rather than streaming.
    Open index.html locally, must manually enable active content. Menu opens, movie plays. No grey screen.
    Copy entire folder to USB, same result; USB plays on a different PC also.
    Upload to web site; same result.
    Am I doing soething differently from either of you? Are you using templates?
    Factors related to flash security (for local and probably USB playback) can be problems. Various server settings can be problems for on line.

  • Flash Exporter vs Adobe Media Exporter

    Can someone explain how After Effects chooses which exporter to use for FLVs?
    I have 3 different scenarios and 3 different exporters are showing up in After Effects. I would prefer to use the Flash exporter since that one seems to give us the best results.
    In CS2 on my PC when I do export FLV the Flash exporter shows up.
    http://www.geniusdv.com/weblog/archives/After%20Effects%20and%20Flash%20settings-thumb.gif
    My co-worker just installed CS3 and when he does this option he gets the new Flash Exporter. But he can't use it because it says for him to use the render Queue. When he uses the render Queue the Adobe Media Exporter is used.
    http://www.mediacollege.com/adobe/premiere/pro/export/images/vCS3_exportsettings-winmedia. gif
    We do not like the results that the Adobe Media Exporter gives even when using the same settings. I never liked using in Premiere because I always had bad results and it seemed to crash a lot.
    The last scenario is using CS3 on my MAC. When I do export FLV I am able to use the new Flash exporter. When going through the render queue I get the Adobe Media Exporter.
    The best option would be the render queue with the Flash Exporter.
    Can someone explain why there is not just one option? And why I can't set which one I want to use. We do have the Flash exporter installed on all three machines. Any help would be great!

    Thanks for the reply Mylenium. I really don't want to go into the problems I am having with the encoded files. I am really just trying to understand why there are 2 separate exporters. I have done some more digging and apparently the Flash Exporter (FLV) is a quicktime exporter. Which is the one we would prefer to use. We are having errors with this exporter and sometimes it does and sometimes it doesn't work.
    We are mainly having difference in encode times and quality loss when using the Adobe Media Encoder. We are exporting projects that use screen shots (which is not what AE is for.) I do notice the difference in time when exporting video projects but I have not taken the time to compare the 2 apples to apples.
    Like I said I just want to understand why we are getting errors with the FLV exporter by QT.

Maybe you are looking for

  • How to find out the WPS PIN for WD100

    HI, I just purchased the WD100-SL-DE, it is good but when I get it to connect to my windows8.1, there is a step to input the WPS PIN, I am not sure what the PIN is and how I can find it. Thanks in advance for the help.

  • Restrict PO creation for multiple plants for same company code

    Hi Gurus, We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happenin

  • Reduce/Expire on post office - advice needed

    My organization has (had) an email retention policy of 30 days for email and 365 days for appointments. We have been on legal hold for the last 3 years so I am looking at roughly that amount of data that will need to be removed when we get the green

  • I want to mount / partition Read-Only !

    I have Arch installed on my Acer Aspire One... and it works great on this little machine! The Acer One has no hard disk, but uses SSD, so to reduce writes to disk i use EXT2, I have my /home on a separate SD card, and I mounted log and temp directori

  • A solution for notes, non-icloud email, itunes

    Wondering if anyone out there can see what I have done... ok, let me explain... Up until an hour ago, I was syncing my iphone4s, ipad2 & Mac "manually" in itunes so my calendar, "notes", contacts updated on all the devices. At this point, I need to m