Field status changed!

Hi,
For a particular GL account which has Fields Status Group assigned for mandatory Business Area, the Business Area field is not available for input. This happened after a particular date. I did not detect any changes to the FSG. BA field has become 'Display' for this account in FB60. In MIRO the same account is picking up BA automatically.
Any clue what could have affected this?
Thanks
Muru

HI,
you said "...when I post to the same GL a/c using some other transaction, the field status is 'Required'." Check the posting keys in the accounting document and there field status in OB41. Compare this with the field status in the posting key where business area is only to be displayed.
Best regards, Christian

Similar Messages

Posting Key Field Status changes - unable to generate Transport request

Dear All,
I did posting key field status change from suppress to optional ( P.Key 24).
However I am unable to generate a transport request.
Please share your inputs
Thanks
Sanjai

Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
Regards
Abhay

Impact of Field Status change in production

Hello Experts,
While doing MB1c intial stock upload i got an error that "Fld selection for mvmt type 561/acct 230000 differs for Ext GA amount in LC(023).
I found that the feild Ext GA amount in LC is made optional for mvnt type 561.
For gl 230000 the fsg is maintained as ZPL1 and that field is supressed.
But the GL 230000 is a balance sheet account so i think that we have to maintain the field status group as ZBS1.
For ZBS1 the field Ext GA amount in LC is optional only.
In production also for GL 230000 the FSG is maintained as ZPL1.
If we change the FSG from ZPL1 to ZBS1 in productin system what will be the impact.
Is this is the correct process or do we need to change the Field status for GL or Mvn=mt type.
Please guide me with correct solution.
Thanks in advance,
Satya

Hello Atif,
There are some other differences are also there between ZPL1 and ZBS1.
Can you please let me know the solution for the below error
"Fld selection for mvmt type561/acct 230000 differs in Ext GA amount in LC (023)"
Am getting this error while am doing MB1c intial stock uplaod
Thanks,
Satya

ProfitCenter Master Field Status Change

Hi,
Can any one tell me settings where i can change field Status for ProfitCenter Master.
I want to make field SEGMENT Mandatory in Profitcenter Master it is ECC 6.00 Version.
Thanks
Manish

hi Mansih,
as fas as I know there is no such transaction. If you want to do something differently, as the system provides, you have to write a user exit.
ec

Cost Center Master data field status change

Hello Gurus,
I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

Dear,
You can use screen variant also...
Transaction code: SHD0
and make that field as required.

RE: Field status of the vendor account group

Hi,
I am doing customization for argentina country specific:
For the vendor account group there should be a field called Fiscal type in General-control tab, But i dont see it. Can any one please help me on this thing?

Dear:
Go to OBD3 there you can find the field status change group option for the relevant Vendor Account Group. If you cant find fiscal type then you should must define it in SPRO....A/c payable master data For Argentina and then Assign it also .Please revert back in case of any confusion.
Regards
Edited by: Atif Farooq on Feb 25, 2011 8:14 AM

Cust Account group field status got changed

Hi Experts,
One of my colleaged has executed the program : RFXPRA05.
As a result of this some of the field in Account group (YSTP) got its status changed
Say for e.g Street 2 & Street 3 where optional entry before he executed the program : RFXPRA05,
but once he has executed the program we found that both the fields got supressed.
and some vendor master account group also got supressed..
What is the function of the Program and where it is used and why is it impacting the configuration for account group?
Could anyone guide us how to restore the value back and what step we need to take.
Kind Regards
Ganesh Raj
9632003325

Hi,
You have to find the changelogs for the configuration in the path
SPRO>FINANCIAL ACCOUNTINGAR AND APCUSTOMER ACCOUNTSMASTERDATAPREPARATIONS FOR CREATING CUSTOMER MASTER DATADEFINE ACCOUNT GROUPS WITH SCREEN LAYOUT
Go to the link and in the menu Utilities--Change logs. Here give the date range and find out the change logs. Using the change logs in teh recent past, you can do the correction.
Also you can compare different systems for the table T077D using the transaction code SCMP. By using this, you can find out what is the change in configuration. You can restore it to original version. You can do the similar thing for vendor acct groups also
Hope this helps.
BTW...This program is change the field selection status of account groups.

Change G/L Codes Field Status group

Hi Experts,
I want to change in G/L Codes Field Status group in Mass. Is their any transaction code for that? Please help me.
Thanks & Regards,
Hemant Maurya

Hello,
If you have not used mass change earlier, you need to be very careful, as these changes are IRREVERSABLE.
Accounting => Fianancial Accounting => GL Accounting => Master Data => Collective Processing => Change Company Code data.
Alternatively, you can use MASS transaction code to change them in mass.
Regards,
Ravi

How to Change Field Status Group pertaining Value in SPRO

Dear Sir,
We are required to change the value for "Cost Center" as sppressed against a GL in the Field Status Group .
We followd following path :
Run Tcode FS00 , giving GL as 351200 , and on "Create/Bank/Interest" Tab double clicked the "Field Status Group" > Double click on "Additional Account Assignment"> Here against the Cost Center it is marked as Suppressed , but we want it to be marked as "Req Entry" .
Kindly guide me , how can this value be changed please .
Regards
B V Mittal

hii
u can do it through obc4.
go to obc4 select the varient. and than go to G004 cost center field statu varient..
go to additional account assignments and than change status to the required field.
Than assign that G004 to GL account.
Thanks
sejal

How to change the field status of "plant" of standard activity ?

hi,dear all:
I want to know how to specify the field status of "plant" of standard activity from "ready for input" to "required entry".
Can the field of the stand network be changed?
Thanks.

Hi,
Try in T-code OPN6
Regards,

I can't change the field status of Tax section in MIRO transaction

Hello, I need to change to visible the field status of RTAX1U12-FWBAS, RTAX1U12-HWSTE and RTAX1U12-HWBAS of Tax section in MIRO transaction. In table settings, administrator option of that section I can change them, but when I save the variant the system do not save the settings. There is another transaction where these field status are maintained? I think that in another part these fields have the status "Invisible".
Best regards,
Alfredo Del Portillo

Hola Alfredo,
The table control for taxes in MIRO cannot be changed by the administrator function like other table controls.
Which columns are displayed or not is decided by the program dependend on several parameters.
The tax base amount is changeable or not is controlled by a setting in FI customizing:
IMG -> Financial Accounting -> F.A. Global Settings -> Tax on Sales/Pur
-> Basic Settings -> Change field control for Tax base amount
I hope the above information answers your inquiry.
Xalu2
Mauro

Change Field Status

Hi, I want to change the field status in the transaction f-78, to make the "tax code" optional. where can I do this? thanks in advance

In OBC4 go to the field status that is assigned on the GL account of the posting(reconciliation account) tab create/bank/interest. In the field status select the taxes area. You will see the selections for the field.
please assign points if helpful as a way to say thanks.

Field status as mandatory while creation of RE-FX Lease Out Contract

Hi SAP Real Estate Friends,
I have a requirement wherein we need to make the field status of some specific fields as mandatory for data input in RE-FX Lease Out Contract. The fields are mentioned below:
1. Profit Centre in Organizational Assignment Term.
2. Payment Terms in Postings Term.
3. Account Determination Value in Postings Term.
4. Resubmission Rule needs to be mandatorily selected by the user creating the RE-FX lease Out Contract.
5. Fixtures and Fittings Characteristics needs to be mandatorily selected by the user creating the RE-FX Rental Object.
Also we need to achieve a requirement that in case a posting has already been carried out for a given RE-FX Contract for a given Account Determination Value, same shall not be available for change in the RE-FX Contract subsequently.
Plz write back with your valuable inputs.
Thanx in advance
Pankaj

Hello,
You can set the field status from this path:
RECACUST > Contract > Dialog > Screen Layout > Field Groups > Field Status per Contract Type
Regards,
Suvarghya.

Serv. Desk: Action: send an email only when a value in a field has changed

Hello,
In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
- only in change mode relevant
- only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
- it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
if <old value> <> <new value>
Any ideas or experience on how to implement this without major modifications ?
Thanks
Christian

Hi Christian,
check out my question on SDN.
Email on Status Change
it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
regards,
Jason

Validation: Field status of G/L account

Problem: When posting non-goods receipt invoices in MIRO, G/L account and acct assignment object are proposed by purchase order, but they can be overwritten by users with no validation, often resulting in incorrect posting.
Such validation controls are in place for ME51N and ME21N. That is, the combination of GL account and account assignment are validated/checked against Field Status Group (FSTAG u2013 based on G/L master) as well as Account Assignment Category (in PO). I want to extend those controls to MIRO non-GR invoices.
This problems fits description in OSS Note 522101. The solution recommended in the Note is u201CPossible incorrect entries could be checked or corrected by validation or substitution if necessary.u201D
If I create a validation in OB28, how should I express the logic in "Check"?
Appreicate any help on this.

Hi,
I do not think so that there are standard BADI or User Exit available in std sap for such validations.
It is a facility given by sap to post to a separate GL account in MIRO screen.
If you want a GL to be taken only with perticular cost center or other account assignment , try a user exit or try changing the std program for MIRO.
Regards,

Field status changed!

Similar Messages

Maybe you are looking for