Field Status for cost center master data!

Hi friends,
can anyone please tell me,
Where do we define, which field is mandatory in cost center master data
regards

Good afternoon Rohan,
To do that :
IMG or transaction KM1V.
Create a variante with attributes.
You can also define time based fields in transaction OKEG
Valérie
Message was edited by: valerie secondy

Similar Messages

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

  • How to make the Profit Center Field Mandatory in Cost center Master Data

    Dear All,
    Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
    Thanks in advance!
    Regards,
    Rajeswari Shankar.

    Hi Rajeswari,
    You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.) 
    Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
    Regards,
    Greta

  • Co code not seen for cost center master data creation in OKEON

    hI:
               In org tab of Cost center master data creation while configuring cost center hierarchy in OKEON i can not see organization tab. I have checked in OKKP Co area is assigned to co code but still the issue persist.
    Br

    hi
    you mean the tab is not displayed? strange, it seems that there should be a screen layout to control the ui, or any transaction variant is recorded. I tried in my side, the tab is there.
    @ Murali, you are right, but in that tab, not only company code can be configured, but also business area, functional area etc.
    best regards, Lawrence

  • How to Make the Name 1 field in cost center master data as compulsory

    Hi,
    We have requirement from the client to make the Name 1 field in the adress tab of the cost center master data as a compulsory field when the cost center master data is accessed through KS01, KS02 T code.
    There is also existing cost center master data in SAP system for which NAME 1 field is blank. How the issue of the existing master data can be dealt if there are no data NAME 1 field in the existing cost center master data.
    regards
    Partha B

    Hi
    This path refers to exit COOMKS01.... (For Cost Center Enhancement using Custom fields)
    For the above requirement, I belive COOMKS02 is the right one.... (Custom checks before saving)
    Br, Ajay M

  • Ovherhead key in cost center master data

    Hi Friends
    I am facing the issue on keeping overhead key in cost center master data. Is there any way to controll the screen of cost center master data? How do I assign a field on the screen of the cost center master data  which is there in the cost center table (CSKS)
    Thanks in advance

    Hi,
    You may be able to use:
    Program Enhancements for Cost Center Master Data
        You can add own fields to the cost center master data. The following SAP
        enhancement is available for this purpose:
        COOMKS01 Cost Center: customer-specific additional fields in the master
        record
        This enhancement includes the following enhancement components:
        o   EXIT_SAPLKMA1_001
            CO-OM customer exit for PBO of customer-specific subscreen "0399" in
            SAPLKMA1.
        o   EXIT_SAPLKMA1_002
            CO-OM customer exit for PAI of customer-specific subscreen "0399" in
            SAPLKMA1.
    Also see OSS notes:
    379464
    206306
    Hope this helps
    Siva

  • Cost Center Master data field status change

    Hello Gurus,
    I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

    Dear,
    You can use screen variant also...
    Transaction code: SHD0
    and make that field as required.

  • "Region" field in Cost center master data needed as mandatory

    Hello Gurus,
    I would like to ask you where exactly in SPRO we can customize the field "Region" in Address tab in Cost center creation as a mandatory? so far its only optional
    is this possible?
    thanks in advance for your help.
    Hana

    Hey Hana,
    According to [this thread|Re: KS01 , Field status Cost center master data;, you will need a user exit to accomplish that.

  • Company code field in cost center master data

    I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

    Hi MG,
    Appearance of the field "Company Code" in cost center master data depends on the following point...
    In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
    If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
    I hope u got it...
    Srikanth Munnaluri

  • Company Code field now shown in Cost Center Master Data

    Hi
    I am new, I configured CCA. Created Controlling area and versions. When I created a cost center company code field not shown. I think one cost center assined to a one company code but in cost center master data Company code field not shown. I want to cost center company code specific. I using ECC6
    Pl help.

    Hi,
    When you will assign additional company codes, the cost centre created now, by default will be assigned to the existing company code, and for the new one - you will have to define cost centres again. So, everything is fine, do not worry.
    Regards,
    Eli

  • Remove Mandatory field in Cost center master data

    Dear All,
      I want to remove the mandatory person responsible in the cost center master data. How to do this
    Regards
    Vasantha

    hi Vasantha,
    as far as I know, this is not possible. If a field is mandatory or not in cost center master data is determined by the system.
    hope this helps
    ec

  • ALE for G/L and Cost Center Master Data

    Dear Expert,
    I am a fresher in ALE  and want to distribute G/L and Cost Center Master Data from our production system to Development and Q/A system. Can you give some guidances? and how to configure ALE for this purpose?
    Regards,
    MAL

    hi,
    steps to configure ALE :
    1.first u hav to create 2 logical systems for ur 2 clients in BD54.
    2.then assign thm in SCC4 for both clients.
    3.thn crete rfc destination in SM59.create in client from which u want to send only.
    4.create port in WE21 for sender.
    5.create partner profiles in We20 for both clients,outbound for sender and inbound for reciever.
    6.now create distribution model in BD64.
    generate partner profiles and distribute.
    now ur ale configration to send data frm 1 clnt to other is ready.
    u hav diff methods like master data,change pointers,idoc extensions,idoc reductions,...... to send data .
    hope this helps.
    reward points if helpful.

  • Lsmw Uploading cost center master data fields ERFNM,ERFDT at History tab

    Hi Gurus,
    I done uploading of cost center master data through LSMW.everything is fine but I have one issue.
    I done Uploading from 4.6 now in 4.6 the cost center was created by some one else when I am doing in ECC 6.0 system automatically taking my name as default it means I can not enter in ECC 6.o that who originally created  it  and what was that date. Is there any way to solve it or system will take only mine name in Fields( ERFNM,ERFDT )at cost center History Data while creating Master data.
    Many Many Thanks

    Yes, system will take the creator name from the person who actually creates the cost center in SAP.
    It will be filled automatically and you can not change the creator name.
    This is to ensure better audit trail and tracability.
    Regards,
    Gaurav

  • Change Tax Jurisdiction code (TXJCD) in Cost Center Master Data

    Hi There,
    We have a problem of making change to Tax Jurisdiction Code in Cost Center Master Data. We are on ECC 6.0 with Vertex system as external tax system. When we create Cost center, system automatically derive tax jurisdiction code from vertex) external system).  Now Vertex have made changes to Tax Jurisdiction Code for same place based on US Gov directive. these changes are time period base say from 01/01/2008 to 06/30/2009 Tax Jurisdiction Code  "TX1000" and from 07/01/2009 to 12/31/999 Tax Jurisdiction Code  "TX2000" (example)  When we go to change mode in Cost Center, system automatically derive the new Tax Jurisdiction Code  and update the cost center with new Tax Jurisdiction Code  "TX2000". When we book invoice for cost center, with back date say 06/29/2009, system through the error, that it is not a valid Tax Jurisdiction Code.
    My question is; how can we maintain two different Tax Jurisdiction Code  in SAP for Cost Center? From configuration stand point of view, we have maintained TXJCD as time dependent field, but still this field is grayed out and sytem populate the Tax Jurisdiction Code  from external system, since we have installed vertex system for tax purpose.
    Please let me know.
    Thanks,
    Pawan Sharma

    Pawan,
    have you received any response on this or identified any solutions as I have also a similar request.
    Thanks,

  • Person Responsible in cost center master data

    Currently in cost center master data the field -"Person Responsible "is mandatory.
    How can I delete this definition-meaning make it as not mandatory.
    Also how can I hide this field.
    Thanks

    Hi,
    Check the following link
    KS01 , Field status Cost center master data

Maybe you are looking for

  • Migrate File Server data from one volume to another

    I am looking for the best way to handle this situation. We have a VHD that has a 4KB cluster size that is getting close to the 16TB mark so no expanding past that due to the cluster size. In the past whenever i needed to pull this off i would preload

  • Surveys created by iWeb

    Hi, I'm a teacher and I wanted to create a web site for students to anonymously take a survey at. I've never used iWeb before, but with a little advice from this forum and limited knowledge from a past computer class I managed to use a combination of

  • How do i get my ipod back working

    how do i get my ipod back working withmy computer the usb is working in my ipod is just its not connecting i download over 500 songs i really need the music on my device

  • N93i bit of a problem can anyone help?

    well i perchased my phone from holiday in hong kong and have since been home and turned it on and phone calls work fine and i can recieve text messages but i cant send them i have been on the phone to orange and they have tryed to update my software

  • Can't Save as a Png or Jpeg

    When ever I try and save as a png or jpeg photoshop cc crashes and the file doesn't save. Also there is a warning button next to save that when i click it it says: "the current file format must be saved as a copy because: It will not save all the doc