Field status for T-code : CK91

Hi All,
I am trying to load data into CK91 through LSMW.
Can somebody help me to suppress some of the fields in CK91 since I dont have data for those fields.
I basically want to know where the <b>field status has been maintained for the Transaction code CK91.</b>
All help will be appreciated.

Dear KALAM,
1.After entering into LSM Workbench,check in the third step - Manitain Source
fields.Select the field for which you dont have any data and delete it.
2.In the 5th step Field Mapping & Conversion rules,you can select the field for
which you want to maintain default values,and click on constant and assign the
value.For Eg if you are always going to enter the datas for plant 1000,then for field
WERKS,we make the value as contact 1000.
Check & Revert.
Regards
Mangal

Similar Messages

Field Status for Vendor Line item or Customer line item

Hi
Can i need to check the Field status for Vendor or Customer Line item when i use the transaction codes F-43 or F-22. This is very urgent.
Regards

Hi Vinay,
You cannot check the Field Status directly when posting a document. The Field Status is controlled by the Field Status group. This is controlled at 3 levels, the company code level, G/L Master level and at the Posting key level. Field status at the posting key level overwrites other groups. It is basically to control which fiedls need to be supressed, which are required and which are optional.
In FS00 under the create/bank/interest tab you will find the field group. Check the Recon account assigned to your vendor/customer master and check the field status in FS00.
Regards
Sridhar

Error ! No field defined for function Code

Hello ,
I have defined everything correctly but when i try to use the push button to go to next screen this message comes up 'No field defined for function Code' .Please advise .
Thank you ,

Make sure that you put define the name of the OK_CODE field in your screen. Go to your screen,   click on the element list tab. You should have a line which as a TYpe as "OK".   Put the name as OK_CODE.
Now in your program.....you need a DATA statement for OK_CODE, and you need to handle the OK_CODE in your PAI of the screen.
data: ok_code type sy-ucomm.
*      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case ok_code.
    when 'BACK' or 'EXIT' or 'CANCEL'.
      clear ok_code
      set screen 0.
      leave screen.
endcase.
endmodule.
Regards,
RIch Heilman

Error ! No field defined for function Code in MENU EXIT

Hello All,
I've created a project in CMOD for the MENU EXIT for handling one menu item in the SAP Standard Menu Bar .
i.e under the HELP MENU Item I've included one more sub menu item.
I've activated the project and I'm able to se the newly added Sub-Menu Item in the activated mode.
But when I press the newly created Sub Menu Item I'm getting a Message in the Status Bar saying :
No field defined for the function code
The Help of it says :
Message no. 00125
Diagnosis
The function code field (OK code field) has not been defined on this screen. If the user selects an application function (not a system function), the system usually provides it in the function code field (OK code field) as well as in SY-UCOMM. This is no longer possible.
System Response
The system is unable to inform the application of the current function code. The application should not use field SY_COMM. This field always contains the code of the last function chosen, which is not always identical to the application-relevant code.
Procedure
You should always define a field for the function code on every screen. The Screen Painter always proposes such a field (OK category), you only need to assign a name and include the definition in the ABAP program.
Please let me know what shud be done ?
Regards,
Deepu.K

Don't use this scanrio ! Instead got Access Key and chamged the Std. Program.

Field status for document entry

Hi Friends,
Please suggest what are the different ways we can control the field status in a document entry.
Thanks, Ashok

Hello
Field status are defined outside the master record.
Mark each field as optional or Required or supressed.
Now assign in master record.
Each company code can have only one FSG variant
If we don't maintain FSG all the fields by default would be supressed
Different GL accounts would have different FSG assigned to them. Say, all material accounts , bank accounts, reconciliation account would have typical FSG for specific purpose.
Reg
*assign points if useful

Field Status by Transaction code or User Exit

Hi all,
Is it possiblee to change field status group according to transaction code and GL account? Any configuration or user exit?
For example, transaction FB01 account 100000 using Field status group A and transaction FB60 account 100000 using field status group B.
Or is there any user exit to change the screen of FI transaction?
Thanks,
Phon

Maybe you could try with FI Validations...Tx. <b>OB28</b>
Greetings,
Blag.

Field status for procurement indicator.

Hi Experts
I have several procurement types created.
But for some time i wish to have one indicator as default. This has been set. However i wish to have the field status 'display'.
It means, while creating component, the procurement indictor field should not be editable and will have a default.
Is the field selection possible for component detail screen?
Warm regards
ramSiva

Field selection for Material Components. is available in EHP3. The path is
SPRO -> PS ->Material -> Procurement -> Field selection for components ->Material Overview , If you are in EHP3 then check it..

Field status for bank account ID

Hi experts,
I have an issue with field status during customer/vendor invoice posting using enjoy screen.
I need to have house bank account ID (HKTID) ready for input. In IDES the field appears in FB70 or FB60 under "payment" tab, but when I try to reproduce it in my development client, the field is not there anymore.
I tried to configure in field status group and posting key, but what can I find is only house bank field status, but not the account ID.
Any configuration I missed to make the field ready for input?
Appreciate any feedback
Thank you very much

Yes I thought of that one too..
I have 2 account ID in FI12 and also in FBZP bank determination.

Table & Field Name for Tax Code

Hi Guru,
Our Client is looking for 1 report in which he wants Tax code & Its Description as per Sales Order No and Line Item No.
Please let me know How I can fulfill this requirement. Its very urgent.
Thansk in Advance.
Dhanu

Hi
Sales Order Document
Sales document header - VBAK and Sales document line item - VBAP ( VBAK-VBELN = VBAP-VBELN )
The line items comes from vbap-posnr
Billing Document
Billing Document Header - VBRK Billing item Data VBRP link ( VBRK-VBELN = VBRP-VBELN )
Condition Tables related to pricing - KONV
VBRK-KNUMV = KONV-KNUMV
For tax code - konv-mwsk1
For condition type konv-kntyp
if u want account doc then bseg-belnr could be linked
Thanks,
Rajat Kumar Sharma

Field status for MIRO

I want to make business area mandatory ,

Hi,
Go to OBBH
Specify your company code and go for f2. if your company code is already exists then double click on that
For example choose line item
Click on create substitution And specify the name and narration
click on insert step. now one table is coming
then go to Prerequisite double click on accounting document header choose company code
Company code = '1000' and go for syntax check
Then double click on substitute specify some narration on right hand box
Click insert + button
again the same table will come choose business place then it will ask constant value ,exit and field to field assignment.
Constant means when it find that the value has to replace with the value specified by in substitution rule.
Exit- out
Field to field assignment means when it find the field is business place the corrensponding field is filled you have to specify here
Specify in the field box like BSEG-GSBER Finally specify active level as 1 in the begining screen
save it and test any problem revert me back
Hope this is clear, if yes assign points
Regards,
Sankar

Field Status for cost center master data!

Hi friends,
can anyone please tell me,
Where do we define, which field is mandatory in cost center master data
regards

Good afternoon Rohan,
To do that :
IMG or transaction KM1V.
Create a variante with attributes.
You can also define time based fields in transaction OKEG
Valérie
Message was edited by: valerie secondy

Check G/L field status group for Business area

Hi, when I set the buiness area, I set field status group to required for BA field, the setting always check the BA field on accouting doc. But some G/L is automatic posted, always show "Business area is a required field for G/L account ...",
Can you help me to slove, thanks

Check the following issues
1)Check the status of the other GL accounts field status for business areas.
2)Check if there is any validation for GL accounts which can be given without business area.
Hope this helps.
Regards

Field Status at Transaction Level

I want to change the field status for Business Place/ Section Code from Supress to Optional in transaction F-02.
How can I change Field status at Transaction Level ?

Hi ,
FIelds Status can be changed by 2 ways
1, Posting Keys - any change in the Field status will Effect all the clients
2.Field Status Group Variant,which we assign in GL Master- Changes to FSG, Will Effect only Perticular Lilne Items of tht GL Account.
As Per your requirment, I do not think you can change the Field Status as Per Transcation i.e for F-02 or FB50 instead you can change the Field Status of perticular GL Account which you are posting the Transcation. which will b specific to the GL Account.
if you want the Changes across clients , you can change the Field Status By posting Keys.
Hope the Above Helps you .
Thanks
Goutam

Downloading/Exporting Field Statuses

First, I know essentially nothing about SAP, so I hope this is the right area. I am an intern who has been tasked with taking SAP data, and automating some processes with it using Access. No big deal at first, they provided us with a table download script and I did a few no problem.
Now however, I need to check that a bunch of customer account groups have (in their company code data) the reconciliation field set to required. This is how they told us to navigate to the field:
In customization, go to SPRO->Financial Accounting->Account Receivable and Account Payable->Customer Accounts->Master data->Preparations for creating master data->Define account groups with screen layouts, or run transaction OBD2.
Click on the u201DDetailsu201D button (or press F2). Click on the field status u201DCompany code data.u201D Click on the select group u201DAccount management.u201D Review the field status for u201DReconciliation accountu201D.
For anything else, I would just download a table and do the check, but these are contained in a structure, which (via some googling) does not appear to be downloadable. Is there any way to get this data into access?
Edit - found an answer, but couldn't figure out how to delete this post. Mods go ahead if you want.
Edited by: James.Field on Jun 2, 2011 1:40 PM

I totally agree with rnm1978, you shouldn't use OBIEE as an extraction tool. Get your users to define extractly what questions they need answered and create those reports in OBIEE, not on Excel.
Havign said that if you do use OBIEE as an extraction tool you should know that the 56K limitation it's an Excel problem, not OBIEE. If you use the Download Data option in OBIEE you can hundreds of thousands of rows, depending on what have you set as the maximum number of rows your BI Server allows. and if you use Excel 2007 to open this data file it can load up over 1m rows (1048576 to be precise).

Custom fields in Field status variant and Posting keys

Hi,
We have defined some custom fields in BSEG table for which we wish to control the field status through Field status groups and Posting keys as well.
Has some one addressed this requirement before? Please provide me some inputs on this.
Regards,
Swapnil

Hello Chakardhar,
Since the same fields for document entry are required for several G/L accounts, you define the status of fields for a group of G/L accounts.
You create the definition under a field status group. Enter the key of the group in the master record of the G/L account. Field status groups are cross-company code, that is, they do not depend on the company code but on the field status variant. In the standard system, a separate variant for field status groups exists for each company code. The name of the variant is the same as the company code. Every company code is assigned to the variant with the same name. You can work in several company codes with identical field status groups as long as these company codes are assigned to the same field status variants. You define the field status for each individual posting key.
Hope I ahd been able to hep you out. Please assign points and let me know if you need anything specific.
Rgds
Manish

Field status for T-code : CK91

Similar Messages

Maybe you are looking for