Field Status for Vendor Line item or Customer line item

Hi
Can i need to check the Field status for Vendor or Customer Line item when i use the transaction codes F-43 or F-22. This is very urgent.
Regards

Hi Vinay,
You cannot check the Field Status directly when posting a document. The Field Status is controlled by the Field Status group. This is controlled at 3 levels, the company code level, G/L Master level and at the Posting key level. Field status at the posting key level overwrites other groups. It is basically to control which fiedls need to be supressed, which are required and which are optional.
In FS00 under the create/bank/interest tab you will find the field group. Check the Recon account assigned to your vendor/customer master and check the field status in FS00.
Regards
Sridhar

Similar Messages

  • How to clear vendor open items with customer open items in APP?

    Hi Experts,
    Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'.  Still problem is not solved, hence I am requesting you to help me in this regard.
    Thank you very much,
    Regards,
    Ganesh.

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • How to make the cost center or WBS field optional for Vendor/customer line?

    Dear experts:
    Does anyone has the experience of releasing WBS or cost center fields to be optional for the customer or vendor line item?
    I've tested in system, neither the field status control in GL account master data nor the FSG in posting key worked, I can't let the WBS field to display in the screen and ready for input.
    So my conclusion is that the FSG control in  not completely effective for customer/vendor line, it there any other method to let WBS to be optional in custer/vendor line items?
    Our purpose for changing that is that we're using joint venture accounting, we need to let users to input a cost object for system to derive joint venture information. please do not suggest deriving JV information using other methods, because we're dealing with a special case, i.g.  in a cross-company document, only a customer/vendor line in our company, so it's impossible to split JV information from offset lines, anyway, please help me out directly with my issue.

    Hi, Lu:
    If I understand your question correctly, you want to modify the FSG of recociliation account of Vendor/Customer to make sure Cost Center/WBS field display in transaction F-22/F-43 for example, right?
    I am not sure whether it is possible, I also tried in ECC6.0 but failed to show these two fields. And I think that doesn't make sense to assign CO object to AP/AR reconciliation account, but assign it to Revenue/Expense account in following line items.
    And You can use New General Ledger functionality Document Splitting to derive corresponding CO object information to Reconciliation Account line item, but it is enabled only in General Ledger level, not in subledger level.
    If you find any other meaningful solution, please also share with us.
    Thanks & BR, Lawrence

  • Configuration for vendor as well as customer

    Dear Gurus,
              If vendor is customer, in that case what are the configuration steps,pls help me.
    Regards,
    Raju.

    Hi Dharmarao,
          If a vendor is a customer then you need to
    i) First create a master for the customer
    ii) Mention the name of the created customer in the master data of the vendor in the control view under Account Control in the Customer Field (LFA1-KUNNR)The customer number is used by the payment and dunning programs for clearing open items. For line item display, the link to the customer line items is established using this number.
    If you require clearing between the customer and vendor, the following requirements must be met:
    $ The customer number must have been entered in the corresponding vendor master record.
    $ The vendor number must have been entered in the corresponding customer master record.
    $ The fields "Clrg with vend." or "Clrg with cust." must have been selected in both master records.
    Kindly let me know if it is useful.

  • Field status for bank account ID

    Hi experts,
    I have an issue with field status during customer/vendor invoice posting using enjoy screen.
    I need to have house bank account ID (HKTID) ready for input. In IDES the field appears in FB70 or FB60 under "payment" tab, but when I try to reproduce it in my development client, the field is not there anymore.
    I tried to configure in field status group and posting key, but what can I find is only house bank field status, but not the account ID.
    Any configuration I missed to make the field ready for input?
    Appreciate any feedback
    Thank you very much

    Yes I thought of that one too..
    I have 2 account ID in FI12 and also in FBZP bank determination.

  • Noted Items in customer line item report

    Hi Friends,
    What is noted items? what is this use ?
    i have seen in fbl5n screen ( customer line item report) in type selection.
    please give u r reply on this i will assign points to you.
    Thahnks
    KSR

    Hello
    Noted items are single line items and basically payments due from the customer/vendors. These transactions  do not affect the balances of the company.
    Example of noted items are post dated cheques from customers/vendors.
    Hope this helps.
    Kavitha

  • Make IBAN field necessary for vendor master

    Hi SAP gurus,
    is there any way to make IBAN field in bank details necessary for vendor master?
    I have tryed with SAPMF02K - EXIT_SAPMF02K_001 but there isn' t a iban filed.
    thx in advances
    V.
    Moderator: Double-post

    Dear all,
    no unfortunately you can not set up this in field status.                                                                               
    It is possible as a workaround to use 'Bank Details' as mandatory in                          
    OBD3.                                                                               
    This is possibly because IBAN can not be entered alone without the                            
    traditional Bank Details. However, once you have entered the                                  
    traditional bank information, it is not possible to set the IBAN as a                         
    mandatory field.                                                                               
    If I were you I'd have a look at user exit and SAPMF02K to                          
    check the vendor master data.                                                                               
    You have also BTEs:                                                                               
    00001440 VENDOR MASTER DATA: Final checks   
    I hope it helps You.
    mauri

  • Table for field settings for vendor master

    Dears,
    Can you please let me know which table do i need to refer if I want to know which fields are maintained mandatory, optional, suppres for Vendor master for each account groups.
    I have looked into table T077K, but the table values are showing for example ..................................... How to conclude with these values.
    Please suggest.
    Regards
    Kamesh

    Hi
    fiedl selection for vendor Mastr depend upon Vendor account gruop there you can fied out which field is optiona or dispaly like wise
    check following link 
    You maintain the account groups in Customizing for Logistics General under Business Partners - Vendor - Control - Define Account Groups and Field Selection (Vendor).
    [http://help.sap.com/saphelp_470/helpdata/en/75/ee0b1c55c811d189900000e8322d00/content.htm]
    Regards
    Kailas Ugale

  • Field status for procurement indicator.

    Hi Experts
    I have several procurement types created.
    But for some time i wish to have one indicator as default. This has been set. However i wish to have the field status 'display'.
    It means, while creating component, the procurement indictor field should not be editable and will have a default.
    Is the field selection possible for component detail screen?
    Warm regards
    ramSiva

    Field selection for Material Components. is available in EHP3.  The path is
    SPRO -> PS ->Material -> Procurement -> Field selection for components ->Material Overview , If you are in EHP3 then check it..

  • Field status for document entry

    Hi Friends,
    Please suggest what are the different ways we can control the field status in a document entry.
    Thanks, Ashok

    Hello
    Field status are defined outside the master record.
    Mark each field as optional or Required or supressed.
    Now assign in master record.
    Each company code can have only one FSG variant
    If we don't maintain FSG all the fields by default would be supressed
    Different GL accounts would have different FSG assigned to them. Say, all material accounts , bank accounts, reconciliation account would have typical FSG for specific purpose.
    Reg
    *assign points if useful

  • Field status for  T-code : CK91

    Hi All,
    I am trying to load data into CK91 through LSMW.
    Can somebody help me to suppress some of the fields in CK91 since I don’t have data for those fields.
    I basically want to know where the <b>field status has been maintained for the Transaction code CK91.</b>
    All help will be appreciated.

    Dear KALAM,
    1.After entering into LSM Workbench,check in the third step - Manitain Source
    fields.Select the field for which you dont have any data and delete it.
    2.In the 5th step Field Mapping & Conversion rules,you can select the field for
    which you want to maintain default values,and click on constant and assign the
    value.For Eg if you are always going to enter the datas for plant 1000,then for field
    WERKS,we make the value as contact 1000.
    Check & Revert.
    Regards
    Mangal

  • Field selection for vendor master

    Hello Gurus,
    Is it possilbe to make a particular field as mandatory in vendore master for a purchase organization 1000 and plant 2000.
    If yes, then how?
    VM
    Edited by: V M on Jul 5, 2011 2:06 PM

    Hi,
    If both purchasing organizations have separate account group then you can very well achieve in customizing otherwise you need to control it in exit SAPMF02K
    Regards
    Melih

  • Revaluation field in field selection for vendor.

    Hi I am unable to find the field 'Revaluation' in IMG Settings in Customizing for Logistics - General: Business Partner ® Vendor® Control ® Define Account Groups and Field Selection (Vendor)
    Is it known by a different name?
    ol help

    Hi Parampreet,
    were you able to find this indicator in "Define Account Groups and Field Selection (Vendor)"? I need to enable this revaluation indicator in vendor master but can't find it?
    Thanks.

  • Field status for MIRO

    I want to make business area mandatory ,

    Hi,
    Go to OBBH
    Specify your company code and go for f2. if your company code is already exists then double click on that
    For example choose line item
    Click on create substitution And specify the name and narration
    click on insert step. now one table is coming
    then go to Prerequisite double click on accounting document header choose company code
    Company code = '1000' and go for syntax check
    Then double click on substitute specify some narration on right hand box
    Click insert + button
    again the same table will come choose business place then it will ask constant value ,exit and field to field assignment.
    Constant means when it find that the value has to replace with the value specified by in substitution rule.
    Exit- out
    Field to field assignment means when it find the field is business place the corrensponding field is filled you have to specify here
    Specify in the field box like BSEG-GSBER           Finally specify active level as 1 in the begining screen
    save it and test any problem revert me back
    Hope this is clear, if yes assign points
    Regards,
    Sankar

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

Maybe you are looking for