FIELD-SYMBOLS and table ?

Hi all,
in my programm i must check in differents tables some values. Tables are parameters of my program.
So i thought that i could use field-symbols for access to the table but it's not work for me.
Just a example, i've 2 tables to check : HRP1002 and HRP1003.
I can't do that :
FIELD-SYMBOLS <fs> STANDARD TABLE.
ASSIGN 'HRP1002' TO <fs>.
ASSIGN line is in error because no compatible type.
How can i do this ?
Regards

Try this code...
tables: rsrd1.
DATA: LineType TYPE string,
      ItabRef TYPE REF TO DATA,
      lineRef TYPE REF TO DATA.
FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE,
               <fs1> type any.
parameter tbl like RSRD1-TBMA_VAL.
linetype = tbl.
CREATE DATA ItabRef TYPE STANDARD TABLE OF (LineType).
ASSIGN ItabRef->* to <fs> .
create data lineref like line of <fs>.
assign lineref->* to <fs1>.
SELECT * FROM (tbl) INTO <fs1>.
write <fs1>.
endselect.
SELECT * FROM (tbl) INTO table <fs>.

Similar Messages

Difference between Field symbols and work area for Internal tables

Hi,
In ECC versions we all know that we need to declare the internal tables without headerline, and for handling the internal tables we need to use exclusive work areas.
Currently i have an issue that we have been asked to use field symbols instead of work areas...can any one help me how to use the field symbols and also let me know how it will improve the performance of the program..
Thanks and Regards,
Kathir

Hi
DATA: WA TYPE ITAB.
LOOP AT ITAB INTO WA.
IF WA-FIELD = .....
ENDIF.
ENDLOOP.[(code]
FIELD-SYMBOLS <WA> TYPE ANY.
LOOP AT ITAB ASSIGNING <WA>.
ENDLOOP.
Now the problem is you can't know the name of the fields of the table at runtime, so you can't write:
IF <WA>-FIELD = .....
ENDIF.
Anyway you can create a field-symbols strcturated like the table:
[code]FIELD-SYMBOLS <WA> TYPE ITAB.
LOOP AT ITAB ASSIGNING <WA>.
IF <WA>-FIELD = .....
ENDIF.
ENDLOOP.
I don't know which are the differences for the performance between to use a field-symbol and to use a structure as work-area.
The differnce between the field-symbols and work-area is the field-symbol is assigned directly to the record, so u don't need to do a MODIFY statament to change something:
LOOP AT ITAB INTO WA.
WA-FIELD =
MODIFY ITAB FROM WA.
ENDLOOP.
LOOP AT ITAB ASSIGNING <WA>.
<WA>-FIELD =
ENDLOOP.
These two pieces of abap code do the same action, so probably the field-symbol improve the performance because it do an access directly to the record without to use an external structure as workarea.
Max

Re: field symbols and interna table

hi,
here is field symbol which is table type
FIELD-SYMBOLS: <gt_pos_data> TYPE table.
there is one internal table it_data.
how can move <gt_pos_data> to it_data.
please help me.
rgds

Hi
You can assign field wise:
like
<gt_pos_data>- field to to it_data-field.
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

Are field symbols and Dynamic internal tables consistant?

Hi,
Are field symbols and Dynamic internal tables
always consistent?
In my program I m creating a dynamic itab and assignig values to it using <FS>, sometimes the program fails to execute assign <Fs> statement...
this happens once in 3 to 4 runs
any solution...
I have proper clear and refresh statements in program.
Thanks,
Hardik

Anurag,
Thanks for a quick reply. Here I am sending a small piece of my code.
MOVE-CORRESPONDING OUTTAB TO DYNTAB.
      CLEAR IT_UDATE.
      CLEAR : T_KBETR .
      READ TABLE IT_UDATE WITH KEY UDATE = OUTTAB-UDATE.
      CONCATENATE 'DYNTAB-KBETR' IT_UDATE-CO_POS INTO T_KBETR.
      ASSIGN (T_KBETR) TO <FS> .
      SUBRC5 = SY-SUBRC .
      IF SUBRC5 = 0 .
          <FS> = OUTTAB-KBETR .
      ENDIF .
read statement will always return CO_POS .
while debuging this code a few times
<b>ASSIGN (T_KBETR) TO <FS> .</b>
returns sy-subrc = 4
and that was leading the program to short dump earlier.
now, as I have a check DYNTAB-KBETR holds no value on display.
this happens very few times. (most of the times report is displaying desired output)
Thanks,
Hardik

Loop at field-symbol (any table) into string ?

Hi Everyone,
I need little help, I have a requirement to extract table content with columns names as the header.
After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through
a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can
write to the file.
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
>>>>>>> LOOP at <table> into line.   >>>>>>>>>>>> " Here the code breaks and fail
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
Exception Message
|Error analysis                                                                                |
|    You attempted to move one data object to another.                                             |
|    This is not possible here because the conversion of a data object                             |
|    of type "v" to type "C" is not supported.                                                     |
|                                                                                |
|      List of internal ABAP types:                                                                |
|                                                                                |
|      C    Text (Character)                                                                       |
|      N    Numerical text                                                                         |
|      D    Date (YYYYMMDD)                                                                        |
|      T    Time (HHMMSS)                                                                          |
|      X    Hexadecimal                                                                            |
|      I    Integer                                                                                |
|      P    Packed number                                                                          |
|      F    Floating point number                                                                  |
|                                                                                |
|      h    Internal table                                                                         |
|      r    Object reference                                                                       |
|      l    Data reference                                                                         |
|      g    String of type C                                                                       |
|      y    String of type X                                                                       |
|      s    2-byte integer with plus/minus sign                                                    |
|      b    1-byte integer without plus/minus sign                                                 |
|      u    Structure (flat structure)                                                             |
|      v    Structure (deep structure)                                                             |

Hi Everyone, I need little help, I have a requirement to extract table content with columns names as the header. After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can write to the file.
thie is the code
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP at <table> into line.   " Fail here
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
and this is the exception:
Error analysis
You attempted to move one data object to another.
    This is not possible here because the conversion of a data object
    of type v to type C is not supported.
Edited by: Misbah on Jan 7, 2010 11:50 PM

How to handle field symbols internal table values?

HI all,
          I declared field string as below.The below code is working fine.
Data : ITAB TYPE STANDARD TABLE OF YAPOPLN, (Custom table).
          wa_itab like line of ITAB.
field-symbol : <fs> type ITAB.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But my requirement is that I dont want all the fields of the table YAPOPLN.My output contains only 2 fields of the table YAPOPLN,which contains total 4 fields.According to my requirement only 2 fields will be getting into one parameter PARAM(this is function module parameter,which is from ALV classes) from the user entered output,which contains only 2 fields.So the above code is not working properly because wa_itab contains 4 fields and giving short dump.
If I am declaring the internal table with the required fields(only 2 fields) and referring that internal table to field symbol <FS>
Data : BEGIN OF ITAB1 OCCURS 0,
         FIELD1 LIKE YAPOPLN-FIELD1,
         FIELD2 LIKE YAPOPLN-FIELD2,
         END OF ITAB1.
field-symbol : <fs> LIKE ITAB1 OR <FS> TYPE ANY.
DATA :WA_ITAB1 LIKE LINE OF ITAB1.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But when I am compiling this code i am getting the below error.I am gettting the same below error when even <FS> is also declared as <FS> TYPE ANY.
.'FS' is not an internal table or defined in TABLES.
Can anyone help me in this regard?
Thanks,
Balaji

Hello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM

How to move field symbol internal table to internal table with header line?

Dear all,
hi...hereby i would like to ask how i can move field symbol internal table to a internal table?
as i know field symbol internal table is without header line..
so, may i know how to do this....to move field symbol internal table to internal table which consist of header line and field and record will same as field symbol internal table...in additional, my field symbol internal table is dynamic table mean everytime will have flexible columns..?
Please advise...
Thanks
Regard,
ToToRo.
Edited by: @ToToRo@ on Aug 20, 2009 6:16 AM

Hello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM

Difference between Field symbols and field group

Hi experts,
Can you please advice me what is the difference between field symbols and field groups.
Thanks in advance,
Logu.

Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
A field group combines several existing fields together under one name
like
FIELD-GROUPS: fg.
then you can use one insert statement to insert values in fields of field-group.
INSERT f1 f2 ... INTO fg.
Field symbols
If u have experience with 'C', then understand this to be similar to a pointer.
It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
FIELD-SYMBOLS <FS>.
DATA FIELD VALUE 'X'.
ASSIGN FIELD TO <FS>.
WRITE <FS>.
Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
example :
DATA: BEGIN OF SPTAB OCCURS 0,
line(1000), " or type string
END OF SPTAB.
DATA: IDX LIKE SY-INDEX.
field-symbols <FS1>.
split tb_sip AT ';' INTO table sptab.
LOOP AT SPTAB.
IDX = IDX + 1.
ASSIGN COMPONENT IDX OF STRUCTURE tb_detsip TO <FS1>.
If sy-subrc = 0.
<FS1> = SPTAB-line.
Endif.
Endloop.
append tb_detsip.
clear idx.
Field Groups / Extracts
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
Field Symbols
http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
Reward points if useful.

Field NAme and Table Name

Hi All,
I got some output values from the legacy system with me but need to know whats the actual field name and table name to which i need to transfer these values. How can i do it, since which theres is not field name or despcription given for the data.
Is there any way i can do it.
Points will be rewarded for all useful answers.
Regards
AB

if you know the transaction code you use to post the uploaded data in SAP, you just need to do BDC recording in using transation SM35. Record the whole process and create a program from the recording... and you wont even need to know the tables and field names-- almost everything will be done for you....
All you need to do is replace record data with upload data.
You can also try to look for a standard Function Module / BAPI which can do the processing for you and provide it with a table containing the upload data ...
Reward points if useful

Delivery note field name and table name in MIGO

hi experts,
i want to fetch delivery note for my material document in MIGO.
Also based on MIGO delivery note NUMBER , i need to fetch MIRO document number i.e mir4 dcoument number.
kindly provide field name and table names for delivery note .
thnaks &r egards,
raghul

hi karthik,
Thanks for your quick reply.
Actually i developed a zreport which consists of fields
1. vendor
2. refrence
3. po
4. material
5. material document
6. qty
7. amount
8. movement type
9. plant
These data i fetched from MB51 by using submit logic.
All above fields are in one internal table.
Now Based on MB51 reference number , i want to fetch
1. MIR4 number
2. delivery note
IN MIR4 tcode.
Refrence number from MB51 and delivery note in MIR4 document are same .
kindly give me suggestions how to get delivery note and MIR4 number ( inv number) in MIR4 TCODE
thanks & regards,
Raghul

How to identify field names and table names as per the client requirement

Dear All,
i am preparing reports for my client of their own requirement, but in sap how can i find the field name, table names like for eg: doc.no, issue,revision no, revision date, date of issue,date of completion, job card no,identificatin no, part no , accept,inspected,testedby, remarks, issue, process.
so please tell what is the path to find the field names and table nae

Hi,
You can select the field which field name and table you want to know, just press F1 button, one more window will open. There you need to select the technical information icon, then you will get the required field name and its table.
Regards,
V. Suresh

Field symbols and field groups

Hi friends plz send me the answer for this query:
What are field symbols and field groups.? what is the"component idx of structure" clause with field groups?

Hi,
A field group combines several existing fields together under one name
like
FIELD-GROUPS: fg.
then you can use one insert statement to insert values in fields of field-group.
INSERT f1 f2 ... INTO fg.
Field symbols
If u have experience with 'C', then understand this to be similar to a pointer.
It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
FIELD-SYMBOLS <FS>.
DATA FIELD VALUE 'X'.
ASSIGN FIELD TO <FS>.
WRITE <FS>.
Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Field Groups / Extracts
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
Field Symbols
http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka.

Field symbols and index

What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?

Hi
this will help you
reward if usefull
<b><u>FIELD-SYMBOLS</u></b>
<u>Syntax</u>
FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
Extras:
1. ... typing
2. ... STRUCTURE struc DEFAULT dobj
The FIELD-SYMBOLS statement declares a field symbol <fs>. The name conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
<b><u>FIELD-GROUPS</u></b>
<u>Syntax</u>
FIELD-GROUPS { header | field_group }.
Declaration of a field group for the extract dataset of the program. Each field group represents the name of a line structure of the extract dataset. You can create as many field groups as you wish in a program. You define the actual components of a field group with the statement INSERT.
The denominator of a field group is either the predefined name header or any name field_group. If you declare a field group header, it automatically becomes the beginning part of all remaining field groups of the program and its components constitute the standard sort key of the extract dataset for the statement SORT.
The statement FIELD-GROUPS is possible in the global declaration-part of an ABAP program, as well as in the subprograms and function modules. Field groups that are declared in procedures are visible only there.
As you can only define global data objects as components of field groups with the statement INSERT, we recommend to declare field groups only in the global declaration part as well.

Difference between Field symbols and Field groups

<b>Hi Friends,
can you tell me the differences between Field symbols and Field groups? with any examples preferably?
Regards
Dinesh</b>

Hi Dinesh,
A field group combines several existing fields together under one name
like
FIELD-GROUPS: fg.
then you can use one insert statement to insert values in fields of field-group.
INSERT f1 f2 ... INTO fg.
<b>Field symbols</b>
If u have experience with 'C', then understand this to be similar to a pointer.
It is used to reference another variable dynamically. So this field symbol will simply point to some other variable. and this pointer can be changed at runtime.
FIELD-SYMBOLS <FS>.
DATA FIELD VALUE 'X'.
ASSIGN FIELD TO <FS>.
WRITE <FS>.
Field symbols: are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field Groups:
A field group is a user-defined grouping of characteristics and basic key figures from the EC-EIS or EC-BP field catalog.
Use
The field catalog contains the fields that are used in the aspects. As the number of fields grows, the field catalog becomes very large and unclear. To simplify maintenance of the aspects, you can group fields in a field group. You can group the fields as you wish, for example, by subject area or responsibility area. A field may be included in several field groups.
When maintaining the data structure of an aspect, you can select the field group that contains the relevant characteristics and basic key figures. This way you limit the number of fields offered.
Field Groups / Extracts
http://help.sap.com/saphelp_46c/helpdata/EN/9f/db9ede35c111d1829f0000e829fbfe/frameset.htm
Field Symbols
http://help.sap.com/saphelp_46c/helpdata/EN/fc/eb387a358411d1829f0000e829fbfe/frameset.htm
Reward points if helpful.
Regards,
Hemant

What are field symbols and field groups.?

hi,
What are field symbols and field groups.? what is the usage of "component idx of structure" clause with field groups?
regards

sorry, question resolved.

FIELD-SYMBOLS and table ?

Similar Messages

Maybe you are looking for