Field/Table to change the header tick in sales order billing plan

Hi SD Guru's
I am using a GUI screen to create standard sales order (VA01). Since my order dates at header and line item level can differ, i want the field name or table name of the header tick which is taken as default from my billing plan in my sales order.
Or is there any setting where my billing plan at item level is not defaulted from my header.
Its really urgent. Would appreciate your reply.
Regards
Ravi

Hi Ravi,
I'm unsure whether this will help you or not. In VOV7, choose your It Cat, in detailed screen of It Cat settings there's a checkbox with "Business data" when not checked which will allow you to change Data at Item level.
Regards
SD

Similar Messages

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

To change the header text of Purchase order using BAPI

Hi,
I am using BAPI_PO_CHANGE to change the header text of PO. But it s not reflecting. Can anyone help me by providing solution for this.
<i><b>Points will be rewarded for the useful answers.</b></i>

Hi,
I need to change the text using this BAPI alone. I am using this because i need to change many parameters of PO.
Can u please say me solution using BAPI_PO_CHANGE. I need to know what are all the parameters need to be passed to BAPI to change the text.
Thank you for replying.

SPL block when changing the Address manually at Sales order level

Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVR

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

The header text in sales order are coming on DE (and has to be PT)

Hi SDN Team members,
I have a strange issue. In the sale s order header the text by default it is coming as DE(German language) but it should be PT portugal language. This situation is in production system. The SAP log on language is PT.
I have replicated the same scenario in Relica of Production as well as test system where i am getting by default language is Portugal. Even i have tried to log on in to PT language where i am not getting the above problem where sales order shows the header text as default PT.
I have checked the sold to party - where the language is maintained as PT, Also in Sales organization and in company code level where the language is maintained in PT.
I have checked the OSS Notes also 442976 and Note 451147 and also the report - RVTEXTE..
This problem comes for almost all the sales users of the portugal.
Can you please help me to resolve this problem.
Looking forward for your favorable reply.
Thanks and Regards,
Jana

Hi SDN team,
I have solved this request. By running the Program - RVTEXTE and inputing the selection parameters as per out business requirement and the problem has been resolved.
Team - Thanks for all your valuable inputs.
Regards,
Jana

Changing the item categories of Sales order in web IC

Hi experts,
We are working on CRM 5.0 with Web IC
We have a scenario where we need to change the item categories of some of the items in sales order.
But in a standard sales order I cant see the item categories of line items in WebIC.
Now the issue are
1. How to make the item categories available in web ic?
2. Is there any standard config to do this or we have to go for development ?
3.Is it possible to change the itemcategories in Web IC?
Can any body suggest me with suitable solution
Points shall be rewarded for sure
Regards,
Madhu

Hi,
you dont change the item category at the header level. The item category will be changed at the item level and the code to do this is
lv_entity_items->set_property( EXPORTING iv_attr_name = 'ITM_TYPE' iv_value = lv_itemcat ).
here lv_entity_items is one of the entity in the collection for AdminI . lv_itemcat is the value you want your item category to be set to.
hope this helps.
Reward useful answers.
Regards,
S Sarma.

Change the Tax Code- In Sales Order i have Tax code for VAT

In Sales Order i have Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
Where the "P4" Tax code is picking in Sales Order.
How to change the Tax Code.
Urgent

Hi CHAKRI,
Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
Regards
Ram Pedarla

Changing the Confirmed Quantity in Sales Order

Hi Gurus,
I have a requirement to change the confirmed quantity of the line item of the sales order. Is there any FM or BAPI that I can use? And how?
Thanks,
Andre

Hello,
I am having to deal with a similar issue.
The allocated quantity needs to be reset, so that the quantities can be allocated again according to the checking rule for product allocation.
This is probably not clear anymore, I am also totally confused now, so I'll add an example.
Example:
SCENARIO 1: Rejected item quantity not available to earlier order:
Assume product ABC is on a monthly allocation plan at a channel level
Available units = 100 units
Allocation plan = 50 units for Channel1, 50 units for Channel2
Assume all orders in this scenario are for one channel
1.     Order 1 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
RESULT: allocation of 40 units is consumed, available allocation = 10 units
2.     Order 2 is entered
Qty of 20     confirmed from ATP check, confirmed for 10 units from allocation check
Remaining 10 units unconfirmed
RESULT: allocation of 10 is consumed, available Allocation = 0 units
Unconfirmed order quantity = 10 units
3.     Order 1is rejected
line item for Qty 40 is rejected
RESULT: available allocation = 40 units
4.     Order 3 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
Allocation of 40 is consumed
RESULT: allocation of 40 is consumed, available allocation = 0
5.     Rescheduling is run for this product (order creation date determines priority in the queue)
EXPECTED RESULT:
Order 2 has highest priority and would be committed for 20 units, leaving 30 units for Order 3
Order 3 Commit quantity 30, unconfirmed quantity 10
Order 1 Line item was rejected, (no committed quantity)
RESULT:
Order 2 - Commit quantity 10, unconfirmed = 10 (as available allocation 0)
Order 3 - Commit quantity 40
Order 1 - Line item was rejected
So I need to reset the allocated quantities first...
Were you able to find a solution for this?

Fm to change the condition value in sales order pricing

Hi Friends,
I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
Can someone please help me. I've been stuck with this for quite sometime.
Thanks,
Dikshitha G

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

How to change the pricing rate of Sales Order after delivery is created?

Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders" after corresponding delivery is created ?
number of the Sales Order to be changed is huge. How can I handle this situation ?
immediate replies would be rewarded

Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

Create the Header Text In Sales Order Header

Hi All,
I want to create a new header text in the sales order header level, Would you mind give me some manual to create this ?
Regards,
Luke

Hi Luke,
Please goto T-code VOTXN->Sales Document->Header->Text object VBBK
You could create Text ID and access sequence.
Assign the access sequence to text ID.
Assign the text ID to the procedure.
Assign the procedure to sales order type.
Please also refer the following online documentation:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f993545a11d1a7020000e829fd11/frameset.htm
Hope it helps.
Regards,
Smile
Edited by: Smile Zhang on Jul 3, 2008 7:22 AM

How can i change unit of measurement in sales order on header

Dear all,
I have material master with base unit of measurement " Ea ".
I have to take unit Pc in sales order.
how can i change unit on header in sales order.
i changed unit on line item in sales order by setting in sales unit field in material master.

Hi,
You can very well do it, please do the following steps,
Go to material master and select the Sales Org.1 and 2, here maintain the sales unit PC and
it will ask you for the conversion, so maintain your conversion for PC to EA. Then maintain
the Division, delivery plant, material pricing group and account assignment group(if not maintained) and save it
Now create the sales order for that resp. material, you will find that system will pick up
the sales unit which is maintained in the material master's sales orgnization tab.
For this you need not to change at the header level of sales order
Please check and revert.
Thanks,
Hrishi

Change of partner analyse in sales orders

Hello,
I changed the partner analyse for sales orders and added a new mandatory partnerrole.
In new documents the partner analyse works fine, but in the existed sales documents I cant´t see, that a mandotory role is missing.
How can I see that this role is missing in the exsting documents???
Thanks for info
Nicole

You can create a custom report but there is no standard way to do this.
When a document is created in SAP, it is a "snapshot" of that configuration, master data, and information as it exists when the document is created. On the SD side there are a few things you can influence, for example, SAP contains some standard tools for mass updating of pricing information. Most of the document exists in its unchanged state though.
You *may* be able to use VA05 and do this (although I doubt it, no system in front of me right now). Other than that transaction or a custom report there really aren't a lot of options.
If you are familiar enough with the tables, you can do a "quick view" or an ABAP Query to get the info. However the SAP partner table is recursive so to avoid getting lots and lots of duplicates you will either have to add some code to a full query, or do offline manipulation of the data.
If you're looking for soild SAP experience to help through some of these hurdles, please contact me.
Bill Wood - President
R3Now Consulting
http://www.r3now.com SAP thought leadership!
Platinum SAP Solutions
(704) 905 - 5175
http://www.linkedin.com/in/billwood

Can the project status be influenced by billing plan in sales order?

I am facing the following problem:
I linked the WBS Element to a sales order billing plan (in header: account assignment).
Now, is there a possibility to prevent changing the status of the project to close technically, while there are still some invoices of the billing in the sales order not billed?
I want to make sure that a project can only be closed once all the invoices related to the project were billed.
Thanks in advance
Maike

Hello Maike,
I have different view here:
System status is set to FNBL automatically when all the items in the sales orders are billed. So user does not really need to set it.
TECO is a status which should follow FNBL generally speaking. And it has to be put manually.
Now, if the requirement is to throw an error when FNBL or TECO is put manually if not all the sales orders items are billed- it can be done by using validation.
A validation can be activated which will check for any open billing item for that WBS when status is set to TECO. If there is any, it will throw an error while saving WBS with TECO.So it will not allow to set TECO. T code for validation is OPSI.
Thanks,
Sourabh

Field/Table to change the header tick in sales order billing plan

Similar Messages

Maybe you are looking for