Field TVRRUR SAKUR is not defined in incompletion procedure RR
Hello Experts,
After upgrade 4.6 > ECC 6.00 existing contracts are incomplete status and it does not allow invoice them.
Information V1105 appears. I tried to fix problem with note 1265438. After that info chaged to
"No screens are assigned to field 'TVRRUR-SAKUR' in UV Customizing (procedure RR)"
I can assign some screen to field and get one step longer but problem has not been solved.
Has anyone encountered this same problem and has fixed it?
Kind regards, Kirsi
Edited by: Kirsi Hakkarainen on Jun 16, 2010 4:40 PM
Hi JP,
I have made the following settings and it complies to Note No.1265438. We are implimenting ECC 6
1. ItCat settings for "ZFMP-FM Periodic w/ TRR" & "ZFMT-FM Std w/ TRR"
Rev. recognition : A-Time-related revenue recognition
Acc. period start : B-Proposal based on billing plan start date
Revenue Dist : C-Total Val.: Bill.Plan-Reld and Corr. Val. Linearly Distribtd
Revenue Event : Not Event Related
2. Revenue & deffered revenue account determination settings :"Sales org./Item cat./AcctAssgGr/AcctAsgnmt/Acct key"
V KOFI 1000 1100 ZFMP 01 08 ERL 41002010 21004057
V KOFI 1000 1100 ZFMT 01 08 ERL 41002010 21004057
V KOFK 1000 1100 ZFMP 01 08 ERL 41002010 21004057
V KOFK 1000 1100 ZFMT 01 08 ERL 41002010 21004057
The above configurations are for two different Item categories but assigned to Revenue & deffered revenue account
3. Unbilled receivables account assignment settings also carried out.
V 1000 41001071 15500031
V 1000 41002010 15500040
4. Checked TVRRUR for the above entries
5. Incompletion procedure "RR" assigned to both the ItCats
KONV SAKN2 Provision account PKON RR 0
TVRRUR SAKUR Account for Non-bill. Receivables RR 0
6. Incompletion status group "RR"
General - X
Delivery - X
Billing Doc - X
Price -
Goods Mvt - X
Picking/Putway -
Pack -
Similar Messages
-
Incompletion log Field VBAP POSEX is not defind in incompltion procedure ZA
Hi Friends,
Need some help on this issue.
We have some orders created in production, and when ever we go to VA02-> enter-> it pops up with the below error message." Field VBAP POSEX is not defined in incompletion procedure ZA ".
I already checked the incompletion procuredue and the field VBAP-POSEX (Purchase order item) was not at all defiend.
It gives the incompletion log for only certain line items in the sales order and not for all. There are already few items delivered and we cannot reject the order to create a new one.
I reveiwed this note "1497255 - Incompletion for PO item number (vbap-posex)" but it states it is for specifically for intercompnay orders.
Our case is standard trade order. It woud be really great anyone has come across the same situation so that i can seek for help..
Thank you so much!!
Best Regards,
RamHi Lakshmipathi,
Firstly, thanks for the response.
Yes.. I did checked... the field VBAP-POSEX was not maintained at item level though.
The same item in other order does not have this problem and it is still open.
This is specific to only very few orders, namely 4 or 5 orders but not with others.
Moreover, these materils are widely used among other company codes or sales org but no issues what so ever.
This one appears to be a peculiar case. Thanks for your time and suggestions for looking it over.
Thank you..
Best Regards,
Ram -
Partner function AP is not defined in partner procedure N ()
Hi,
Error: Partner function AP is not defined in partner procedure N ().
I am getting above error in CRM service orders for Contact person replication from CRM ECC.
In debugging Middleware queue and we found that it is getting triggered from FM SD_PARTNER_EXECUTE_CHECKS. In some cases contact person is getting replicated to ECC successfully but in some it's not ! And in both the cases this error is getting passed to CRM service order.
Can anyone please help me on this exactly whatu2019s wrong with partner procedure and partner function customizing? Or do I need to add some code logic to stop this.
Kindly help ASAP.
Because every day we are getting thousands of CRM service orders which are affected by this Error.
Regards,
Amol.Hi Dipesh,
Thank you very much.
I have verified both the things.Means partner procedure is same in both the system. Also contact person is replicated to ECC with same order.
As i mentioned this is happening with some service orders. Also there are some service orders where contact person is successfully replicated to ECC but there is error on CRM side:Partner function AP is not defined in partner procedure N () .
Kindly let me know what are the further checks i need to do.
Regards,
Amol. -
Field in structure 'is not defined in the ABAP Dictionary'
Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
DavidHey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin -
Jco error RFC adapter field PT F not defined
Hi Experts,
I am in a strange situation as I have become clue less on this issue
It is a file to XI to RFC scenario.. runs fine in dev environment
When I change the parameters in teh rfc communication channel to point to QAS it throws
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_TRAX_PO_CHG_IV in remote system (RfcClient[CC_QAS]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Field selection PT F not defined:
There is no such field as PT F and besides the version of the bapi in QAS is in sync with the dev..
pls help me ou ton this
Edited by: Ravindra Teja on Feb 27, 2011 8:45 AMHi,
First of all, can you please elaborate what you want?
secondly, why don't you transport your developments to QAS?
Third, what is the reason behind changing the receiver RFC adapter parameter to QAS?
4th, do you want to post data to QAS, if yes, did you transported the RFC to QAS ? Please re import the rfc to your swcv from QAS system.
Please check communication channel if you getting any error?
Regards
Aashish Sinha -
Inutilização de NFe: Log de erro Message type 8 is not defined
Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela MachadoVerifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM -
Addition of a Field in EKKO/Data not getting populated for that field
Hi All,
I have added a Z Field in EKKO Table through the Append Structure "CI_EKPODB".
There are around 2000 records in EKKO and for all the records that Z field is Blank.
But, when I write a Select Query in Program to Fetch the Records where that Z Field is BLANK, I get only 50 Records.
The same happens when I Execute SE16 for EKKO by giving condition Z Field = INITIAL. I get only 50 records in the output.
Please help me understand why I dont get all the Records where that Z Field is INITIAL?
Is any customization required or is this a Technical Issue?
Please help.
Thanks in Advance.hi rohan,
if you are adding a field in a table by append structure then make that field as ZZ instead of Z to differentiate it from normal fields.
now when you have created the field in a append structure then if have not checked the initial flag.thats why u are getting this data inconsistency.
this is because earlier 2000 entries are prestent in the table , now when you add another field in the table then that field will not have value for those 2000 records.
now when you create the fiels select the init flag field,if you select this then new flag field will NOT NULL,so initial values will be filled for that field for existing 2000 records.
Note : NULL and INITIAL are different things, NULL means not defined and initial means which is having its initial value.
check that init flag and u will get those 2000 records, you are getting inconsistent data now becuse value for that field is null ie not defined.
hopr this will solve ur post and u wil get the concept of append structure.
Thanks and regards,
Tanmaya -
Incompletion procedures in sales order
Hi There,
when creating a sales order for certain customers some extra fields are to be required fields.
We don't want to have a brand new order type for these customers and instead we have tried to solve with an additional partner type for this customer.
In partner type sold-to party we have assigned the new partner type in customer master and in sales header partner determination in customizing.
Then we have made a new incompletion procedure for partner determination and assigned this to the new partner type. In the incompletion procedure we have stated that field from VBAK and VBKD must be required field, but it doesn't have influence when creating the order.
Do anyone have any ideas of how or have other solutions.
Regards
CarinaHi,
I will try to explain my issue and allready created customizing more detailed as you recommend.
When creating orders for certains customers extra fields must be required fields in the standard order type and we don't want to solve the issue by creating a new order type.
In standard order type SO incompletion procedure X assigned, e.g. incotems.
When creating the order for customer 11998 the field PO number must also be a required field.
We created a new partner type ZP which is to be used for the customers where PO number must always be entered.
Set up Partner Determination for Customer Master
Partner Functions: ZP (partner type KU) / Error 07 (to start with) and Unique switched on
Partner Determination Procedure: ZP
Partner Functions in Procudure: ZP - AG, ZP - ZP (both Not Modifable and Mandat.function switched on)
Partner Determination Procedure: AG
Partner Functions in Procudure: AG - ZP
Accounts Groups
ZP assigned to sold-to party account group
Set Up Partner Determination for Sales Document Header
Partner Determination Procedure: TA
Partner Functions in Procudure: TA - ZP (Origin table = C)
Define new incompletion procedure for Partner
Procedures - new created Z1
Fields: VBAK - BNAME Status 04 Warning switched on
VBKD - BSTKD
VBPA - ADRDA
VBPA - KUNNR
New procedure now assigned to partner type ZP
The idea was than when the partner type ZP was copied from customer master data into the order when creating the order the incompletion procedure from ZP should be active in the order type SO.
I have got a lot of good ideas, but unfortunately I don't see that they solve my problem.
Regards
Carina -
Partner function AP is not def in partner procedure in ECC - CRM complaint
Hi,
There is an error occured while creating credit memo request from the service complaint in the CRM. It is not stopping the process but it happens several times. The error message is always in the document but not able to fix it. There is no partner function called AP in both CRM and ECC but how come the system is looking for this new partner function in the partner determiination procedure in ECC. The detail error message as below
An error has occurred in the system RP9CLNT020 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Partner function AP is not defined in partner procedure ZUK () (Notification E VPD 003)
ORDER_HEADER_IN has been processed successfully (Notification S V4 233)
ITEM_IN has been processed successfully (Notification S V4 233)
Sales document 0350002869 was not changed (Notification E V4 219)
Any clue in fixing this issue will be great.
Regards,
Ram.Hi,
There is no problem in creating credit memo in ECC even with these error message. the credit memo document is created in ECC. Actually thiis is not happening for all the complaint documents in CRM. It happens only for few customers/complaints.
My doubt is with contact person mismatch in crm and ecc, but that is also perfect. pls let me know solution for this issue.
Regards,
Ram. -
Hi everyone,
I have a CF9 ORM problem that I haven't been able to figure out and thought I'd see if you had any idea. I have seen a few postings talking about a "similar" problem but none of them correctly resolved this particular issue. I appreciate any help you can offer.
I recently created a CF9 app where I generated scripted ORM CFCs for my app using ColdFusion Builder. It worked great and my app was completely working. However, when I was adding some enhancements, I ran into an error when I restarted the CF app server. Here's the message I keep getting:
"Id field not defined for cfc Path.to.my.ORMCfCPage. Either the table should have a PK column mapped to a cfc field OR at least one field should be specified as id."
My App.cfc file only had orm enabled (no other mappings) when it was working. I've since tried specifying things like the cfc location etc. and it still hasn't helped.
// MORE DETAILS:
- When my app was working, I had moved it to 2 other servers. I had this error on both of those but not on my local copy. They all use the exact same database.
- The last change I made before the error was adding a generator="identity" field to my generated ORM beans. Once I got the message, I tried changing it back and restarting again but still got the error.
- I've also made sure all of the Adobe tags are in my web root (as suggested in a prior posting about this problem). I've search all over for a solution and nobody has a solution posted online that works so far.
Do you have any idea why this is happening?
Thanks!
JeffQuick thought and probably not relevant, but do you have this.ormsettings.savemapping set to true in your Application.cfc? I've fallen foul of this before - once CF has generated the hbmxml files and saved them to disk you can make all kinds of changes to your code which won't make a difference as it'll continue to read from the file versions, but only for certain properties and methods at times it seems.
Long shot I know, but I found CF ORM to be a nightmare for seemingly random caching. -
Transfer Purchase Order - Error message "Field selection ZTR not defined"
Hi all,
I've customized a new transfer purchase order type : TRA.
When I go to ME21N and choose TRA type, SAP displays this error message :
"Field selection ZTR not defined
Message no. ME028
The field selection required by the system is not defined in table 162.
Further processing is currently not possible."
How can I fix that please ?
Regards,
Bahia.Hello,
Check in IMG - MM - Purchasing - Purchase order -define screen layout - Check any field selction ZTR has been configured. And also check in Purchasing - purchase order - define document types - your PO doc type has reference to field selection group ZTR - if yes change it..
Regards
Mahesh Naik -
Field -RLTYP is not defined in ABAP-dictionary
Hello, gurus!
We have upgraded to ERP 6.0 (from 4.6c).
Now I have a problem with search help in TX.1
1. Transaction TX.1
2. F4 on the field KONTRH
3. Choose the "Partners by BP Role" tab
4. F4 on BU_PARTNERROLE
Next I see message "Field -RLTYP is not defined in ABAP-dictionary" instead of the roles list.
I appreciate any help!
Thanks in advance,
Anton.I've found the solution!
Note 1525604 -
While executing BAPI_PO_CREATE1 by using Adaptive RFC Model in Webdynpro
I was facing the following Error
Field Selection PTFF not defined , error key : RFC_ERROR_SYSTEM_FAILURE
But while trying to create BAPI_SALEORDER_CREATE is working properly with the same configuration.
If anyone come accross this issue please help me outThis is beacuase of some issues in the parameters that are passed and is rectified.
krishna -
Field selection PT0 not not defined
Hi All
I am creating purchase order i will checking the following error coming
" Field selection PT0 not not defined"
Thanks and regards
Deepahi,
Did you do any changes or deletion of the field reference key for the field maintainence of the PO..
this error comes when system doesn't find the field reference key maintained for the field maintenence for the combination of item cataory/document catagory...
check properly...
Regards
Priyanka.P -
The maintenance dialog for V_AISUSER is incomplete or not defined
I was not able to assign S-user for SAP Support Portal functionality from SPRO. I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
The maintenance dialog for V_AISUSER is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Thank you in advance for your assistance.
Regards,
FrancHi Nesimi,
I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
What's a ditto...
Thank you again for your time.
Cheers,
Franc Nguyen
Maybe you are looking for
-
"An Album List" View in ""Purchased on iPhone" Playlist
I just found out that "a album list" view button (2nd button from the left of 4 buttons) located upper right corner is not available with "Purchased on iPhone" playlist. It is available within a regular "Purchased" playlist. Does anyone have the same
-
I have a Mini and am about to purchase a MacBook. I want to sell the Mini for financial reasons. With the mini-DVI to VGA adapter, can I use the MacBook as a desktop replacement or should I either: a) rethink the MacBook purchase b) rethink selling t
-
Preparedstatement problem in oracle jdbc 10.1.0, 10.2.0
Hello, Im using oracle jdbc to connect oracle9.0.1.0.1 i have a table like id-NUMBER RESULT-VARCHAR2(100) E_DATE-DATE STATE-VARCHAR2(1) when i write the code like "update TBMIS_AUDIT_ISSUE_PROJECT set RESULT=? , E_DATE=? where PROJ_ID=? and ISSU
-
Keep getting a message over and over that Adobe Flash Player has stopped working.
Keep getting a message over and over that Adobe Flash Player has stopped working. Uninstalled and then reinstalled. Did not help.
-
Include an interactive Youtube player in Edge Animate - Not working properly!
Hi folks! I am working on a new project which is based on a interactive web video. In the Edge Animate proyect I have implemented a Youtube fullscreen player which has interactivity. On the one side, in the Edge project I have included a JS which con