Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
- both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly
If I look in the SharePoint logs I get the following:
Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
Any ideas?
Many Thanks,
Jenny

I have re-done the migration from Enterprise to Foundation and now get the following error:
Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
Any ideas?
Many thanks in advance,
Jenny

Similar Messages

Error_42_Error occurred in deployment step 'Activate Features': Field type MyCustomField is not installed properly. Go to the list settings page to delete this field.

Has anyone encountered this error.
I am developing on SP 2010 with VS 2010.
I was following an online tutorial: How to use custom form templates in NewForm.aspx/EditForm.aspx located at:
http://sharepointbox.blogspot.co.at/2010/11/how-to-use-custom-form-templates-in.html
The tutorial was a little lacking on some of the direction, but it included the working source code, and I managed to complete it.
Every time I try to deploy my version I get the error: Error 42 Error occurred in deployment step 'Activate Features': Field type MyCustomField is not installed properly. Go to the list settings page to delete this field.
I have gone through my code line by line and matched it to the working code from the tutorial, so I can only assume that I am missing something in the Procedure to properly deploy.
Any help is greatly Appreciated!

It seems that something went wrong with your custom field type installation. Check below line in .xml file of your custom field type and correct it if needed.
<Field Name="FieldTypeClass">DocumentFieldType.DocumentFieldTypeClassName, DocumentFieldType, Version=1.0.0.0, Culture=neutral, PublicKeyToken=379382f3e8928835</Field>
Please recheck respective values of namespace.classname , dllname. and publickeytoken in your code
Thanks. Please mark it as an answer if it helps.

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

AirportAtheros.kext not installed properly when I re-install OSX

Hi
I recently bought a MacBookPro C2D and it was all working fine until all of a sudden it no longer opened .dmg files. after a while i rebooted and it wouldn't restart. so after a stress i reinstsalled OSX... that fixed the .dmg problem but now when i start a box comes up and says the airportAtheros.kext file was not installed properly...
the computer now doesn´t recocnise that i have airport and whats more i can´t even find the airportatheros.kext file when i use pacifist to to open the OSX disc!!!
by the way i installed the latest airport update before all this happened and now afterwards too.
any suggestions would be welcome
thanks alot
MacBook Pro 2.33 C2D Mac OS X (10.4.8)

ok i repaired the disk permissions with disk utility and it´s all working sweet now...

Individual fonts not recognized properly when opening a MAC FLA file on PC

I'm getting a missing font warning when opening an FLA file
even though I have all the necessary fonts. The problem is that
while I have MyriadPro-Bold, MyriadPro-BoldIt, MyriadPro-Semibold
on my machine, they only show up in Flash as the Typeface names of
Myriad Pro (first two), and Myriad Pro Light (last one).
I don't want to have to go through an entire file and apply
bold and italics to anywhere they exist, so I'm hoping there is a
way to map these properly. Adobe Type Manager shows all these fonts
properly when I open it, so I don't understand why Adobe's version
of Flash can only see the font family and not the individual fonts.
Hopefully someone out there has had the same problem and can
help me figure this out.

I know this thread is a bit old, but I wanted to share my experience and solution in case anyone else runs into this.
The other day, I spent many hours editing some photos for a client. I saved them all and closed Photoshop. When I tried to open the .PSDs, they all came up with this "Not a valid Photoshop document" error. I was freaking out. I could see the thunmbnails and previews with the MacOS Finder and could see the images just fine in Lightroom, but couldn't open them in Photoshop CC.
Finally, I remembered that these were NOT supposed to be .psd files! They were supposed to be TIFFs. What happened was, when I edited them from within Lightroom into Photoshop, they opened as TIFFs. However, when I did "save as", I wanted to name them similarly to some other files I had. I clicked on one of the existing files to copy the file name in the Save As dialog to make it easier to name the new file I was saving, but I didn't realize it was changing the file extention from ".tif" to ".psd" as well. The older MacOS (version 9 and earlier) didn't rely on file extensions fo identifying file types, so it didn't hit me right away that this would be the problem. When I changed the incorrect .psd file extension to .tiff, the files opened in Photoshop just fine.
SO... if you run into this "Not a valid Photoshop document" error, try figuring out if it's actually another file type (.jpg, .tif, .png, etc) by either getting the file info from another program or just experimenting with different file extensions. Chances are good that your file isn't actually corrupt, but just named improperly!

Fonts are not showing properly when opened through mail?

When sending a PDF via email the Frutiger font does not appear properly on an iPad or iPhone. When viewed on an iPhone all the text appears as gradient boxes and when viewing on an iPad font becomes too light to be legible. Is this a problem with the font in the iOS platform? I also tried opening the file in iBooks and got the same outcome.

Does disabling hardware acceleration have a positive effect or is it still happening?
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

"DAO is not installed" error when opening RoboHelp 8

RoboHelp 8 HTML has been installed and working fine on my computer since March, 2011. I am using Windows 7, Service Pack 1. Then, in November, 2012, a network administrator installed some Microsoft security updates on my computer. Afterwards, when I attempted to start RoboHelp, the following error appeared, and the application wouldn't open:
"DAO is not installed. This application cannot run without DAO, so please install DAO then try running the application again."
I followed the instructions on (http://forums.adobe.com/thread/249697) to reinstall and register dao360.dll, but RoboHelp still won't open, and the same error message appears. Please help!

Just one gotcha. If you open your project in Rh10, you cannot go back. Make sure you take a copy of the Rh9 version of your project. You should anyway but if your manager does not approve the upgrade...
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Document not showing properly when opening in Acrobat 9 Pro

When I create a document in InDesign and export it as a PDF, I want to see what it looks like as the PDF. One of the documents that I opened does not look as it should. It only has the photo on the ad but is missing the red background and the words on the ad. As a thumbnail, it looks correct. But, it is not showing up correctly when I open it in Acrobat. Some of the other ads are fine but this one in particular is not showing me all the elements. What do I do to fix this?

Yes, I have the most current version of AA9. I exported the document from InDesign using the PDF exporter. That is what I have used for years and it has worked fine. I just installed CS4 yesterday.
I think I realized what the problem is but I don't know how to fix it properly. I actually went back to the preferences in AA9 to the document color options in accessibility and changed it back to its original state (which, I believe, is where nothing is checked). I had originally changed it because I was trying to experiment with the background of the program. It's black and when I open a PDF, I can't see the black border. But I mistakenly changed the document color. Which brings me to the question of: how do you change the background color of the page so that I can see the black border on the document? I sell advertising so I need to be sure that when people send me their ads, they have black borders. And I can't tell when it has the background behind the document so dark. Acrobat Reader has a white background.
Additionally, can I still install the latest Acrobat Reader and use that instead of AA9 if I want to? It seems easier.

"Java Not Installed" Error when opening company web using Safari

I recently got an error message that Java wasn't installed on my system. I recently installed the WebEx applet because before that, I've been able to view Java applications using Safari with no issue.
Has anyone else seen this?

I have no idea what WebEx is, but a quick search turned up this thread
http://discussions.apple.com/message.jspa?messageID=1952483

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly. I have uninstalled/reinstalled evernote but it still doesn't work. Anyone know where evernote stores their files on a Mac/

I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.

Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

PLEASE HELP! - when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

Similar Messages

Maybe you are looking for