Field Upgrade Software (FUS) for 5508 controller

All
I would like to know the Field Upgrade Software can be uploaded along with the IOS : AIR-CT5500-K9-7-0-230-0.aes . please suggest
Controller : AIR-CT5508-50-K9
IOS : AIR-CT5500-K9-7-0-230-0.aes
FUS : AIR-CT5500-K9-1-7-0-0-FUS.aes
Regards
Lerner

You don't need to but if you want, go ahead.

Similar Messages

Upgrade software version for wireless controller

Hey
Does anyone knows or recommend the best stable bug free (or less bugs) software version for Cisco controllers models 5508's and WISM2 .
Thanks
Sent from Cisco Technical Support iPad App

If you have Windows 8 machines, 7.3.101.0.
If you don't, then 7.2.111.3.
Otherwise, you can wait for the 7.4.X to be published in the next few weeks.
NOTE: Whether you are going to 7.2.X or 7.3.X or 7.4.X, please upgrade the FUS.

Upgrade Software Version WLC 5508

Dear,
i try to upgrade the software from 6.0.199.4 to 7.5.102
can we do it directly or we shoud upgrade gradually first from 6.0 to 7.0 then 7.5 ?
when we try from TFTP it give error [code file error disconnected- unknown error]
tru FTP error is [cont send replay disconnected]
Can you Help me Please

addition to Sandeep & Scotts feedback,
When you do the upgrade, make sure your 5508 FUS also get upgraded to latest version 1.9.0.0. Here is the release notes for that
https://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.pdf
This process will take 30-40min & do this within a sufficient outage/maintenance window.
Here is the release notes for 7.4.121.0(7.4MR2) the one I would recommend
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74mr02.html
Also refer the compatibillity matrix to see which product it will support depending on the products that are available at your environment
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
HTH
Rasika
**** Pls rate all useful responses ****

New software for the 5508 controller -when?

Hi,
Anyone have a clue when the new software for the 5508 controller is going to be released?

I hope they have resolved the bug CSCte01087 present in software 6.0.188.0. since my 1252 can't associate to the controller i had to downgrade to 6.0.182.0.

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Confirm Upgrading Software for VPN 3060E Concentrator

Maybe I have the steps wrong, but my upgrade didn't work. See below to confirm my instructions to upgrade VPN 3060E concentrator
UPGRADING SOFTWARE.FOR VPN CONCENTRATOR
1. Go to Administration/Software Update/Concentrator
2. You will see the current software revision, below that you will see the current image file.
3. Enter the complete pathname of the new image or click Browse to search for the file. File must be accessible by the workstation you are using to manage the VPN Concentrator.
4. Once you have the pathname of the new image entered, click the upload button.
5. You will see the Software Update Progress window appear.
6. Continue to wait until the update progress window completes and says that update was a success or you can stop the file transfer that is progress by clicking cancel.
7. After the update, the manager returns to the Administration screen where you may see a message that a file upload is in progress. Click the highlighted link to stop it and clear the message. The manager will also verify the new software.
8. A reboot of the concentrator is needed once the update is complete.
9. To reboot the concentrator go to Administration/System Reboot. In the action field select reboot. In the Configuration field, choose to reboot without saving the active configuration. In the When to Reboot/Shutdown section, choose Now.
10. The Software Update Error Screen will appear if there was a problem with the upgrade.

Hi,
Yes, you pretty much summarized what needs to be done in order to upgrade the VPN3000.
So, what is the error that you got while upgrading. Also, when you download the image from cisco.com, make sure that the file size matches.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_administration_guide_chapter09186a00800bd91f.html
Regards,
Arul

Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade.

Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?

I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

Yes.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Otherwise, you may need to do one of the following steps.
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
If you continue to have problems with your disk, it may be physically damaged and need to be replaced

Upgrade software for torch 9800

I have BB Torch 9800. I m living india and carrier is Airtel. Can anybody help me to how to upgrade software.

Hello,
The simplest way is to, on a PC (you cannot do this on MAC):
1) Uninstall, from your PC, any BB OS packages
2) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
3) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
Don't forget to backup.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"Update for raid controller firmware" in availabel system upgrade does not go away after upgrade

We have two Ironport WSA, one S360 and one S370. Both stil have the "Update for raid controller firmware" still listed in "Available upgrades" even though we have done the update and rebooted the appliances.
How can we confirm that the update is applied?
If it is and the notice is still there how do we get rid of the reminder?

Go to the command line of the appliacne and run "version"
That will show you the current version of the firmware.
If you have record of what was there, you can compare...
Otherwise contact TAC, they can verify that you have the up-to-date version and pull your serial from the distribution list so you don't see it any more.
Ken

Im a beginner in sense of using my ipad, Iphone 4s. although i've had both for over a year. if i upgrade software version do i loose any of my music, video or contacts on any of my devices?

Im a beginner in sense of using my ipad, Iphone 4s. although i've had both for over a year. if i upgrade software version do i loose any of my music, video or contacts on any of my devices?

You shouldn't lose anything at all under normal circumstances, but you should be proactive and backup your iPad with iCloud (if you use iCloud only) or if you use iTunes, transfer purchases, backup and sync before you update your device.
iOS: How to update your iPhone, iPad, or iPod touch - Support - Apple

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance " Help pleas

I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

I have upgraded my software to OS X Snow Leopard. Now I want to update that to Lion. How do I do that? When I look at the Lion software available for download on the apple site it all seems to be update software for people already a version of Lion.

It has to be 10.6.8 I believe, before you can upgrade to Lion. I found some more info, please check out: http://www.informationweek.com/byte/howto/personal-tech/desktop-os/231001728
Be sure all your programms will work on Lion. Power PC programms do not work anymore (eg Nikon Scan 4 will not work from now on on Mac OS X). Some versions of Canon utilities for camera's do not work, Canon still have to upgrade. For an App Compatibility Table: http://roaringapps.com/apps:table

I have CS 5.5, can I upgrade to 6 or 7 software versions for free?

I have CS 5.5, can I upgrade to 6 or 7 software versions for free?

I looked all over for the link/place on the adobe site where I can pay to upgrade. Any ideas?

Field Upgrade Software (FUS) for 5508 controller

Similar Messages

Maybe you are looking for