Field validation not working if text added to SO Header.

In include MV45AFZZ at the end I check that the payment terms have not been modified to credit, so I added this code in FORM USEREXIT_SAVE_DOCUMENT_PREPARE:
IF xvbkd-zterm <> yvbkd-zterm.
And I can change the quantity in the Sales order, but if I change the header text, this condition is triggered even if I did not change the payment terms.
Anyone has an idea why?
Thank you.
Regards,
Carlos

Hi,
Can you please explain in details whats your requirement is?
Many thanks
Regards,
Kiran

Similar Messages

Multivalued lookup field validation not working

Hi Experts ,
I have a scenario where one of my table is looking to a multivalued look up table .
I have placed a validation on the main table , which works fine if the first value is selected properly , but if i select a wrong record (which should fail according to the vlidation ) it does not fail .
Eg : For a multivalued field first value i have slected as "TRUE" (which is correct ) - No validation error (as expected)
again if i seltect another value "FALSE" (WHICH IS WRONG) - No validation error ( Not as expected)
on the other hand if i select the wrong value in the first attampt the validation fails (which is as expected) .
Please let me know what has to be done .
Regards,
Vignesh

Hi,
Can you please explain in details whats your requirement is?
Many thanks
Regards,
Kiran

Required field validation not working

Gurus,
I've made fields mandatory on dozens of forms in the past without any issue.
I'm currently developing a custom form with Disposition values which are required. My "create" page indicates the fields are required with an astrick but is not enforcing the value after clicking on my "apply" button.
Any ideas?
This is happening for both client side and server side. Disable Server side validation is set to "false".
Thanks,
Scott
Edited by: sreese on Nov 29, 2010 2:56 PM

After further analysis, I was able to resolve myself:
Set "Apply" button Disable Server Side Validation and Disable Client Side Validation = False.

Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!

Added or ediited texts by Bluebeam Revu,and has been saved,when I open it by the Adobe reader version 8.1,why it does not show my texts added by Revu?8.1 is my favorite version,I also tried it in a later version fo Reader,it doesn't work too!

Bernd Alheit wrote:
Looks like a problem of Bluebeam Revu, not Adobe Reader.
The response above is only a speculative answer to the original question. DSI-Hal, did you try to flatten the text in Bluebeam Revu prior to opening it in Adobe. This has worked for me on several different documents but not sure if we are using the same version of Adobe Reader.
Give it a shot. Good luck.

Client Side Javascript Validation not Working in Struts 1.x version

hi,
I'm following the steps provioded in the below link for Javascript Client side validation but still it is not working.I'm struggling to get this work.
[http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/|http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/]
"The framework automatically generates the browser specific JavaScript and validate the data only at the client side."From the above statement i undertstand that framework itself generates the javascript function for validating the field mentioned in validations.xml file so that we dont have to explicitly write a javascript function for
validating the fields
(or)
Do we need to call an explicit function
Please need help on this.
I have followed all the steps mentioned on the above link but Client Side Javascript Validation not Working in Struts 1.x version....
Thanks and Regards,
Deepak

Hi,
Please find my steps below....still getting an error.
2> which version of commons-validation.jar needs to be downloaded ...Link please
    downloaded the latest commons-validation.jar and placed in lib.refreshed the project,and did a build.
    3> which DTD name to be specified in "validator-rules.xml" which is in accordance to commons-validator.jar file.
validator-rules.xml ::
<!DOCTYPE form-validation PUBLIC
          "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
          "http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">validation.xml:
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
i did as u said and im gettiong the below errorNov 5, 2009 4:33:08 PM org.apache.struts.validator.ValidatorPlugIn initResources
SEVERE: Invalid byte 2 of 2-byte UTF-8 sequence.
org.apache.commons.digester.xmlrules.XmlLoadException: Invalid byte 2 of 2-byte UTF-8 sequence.
     at org.apache.commons.digester.xmlrules.FromXmlRuleSet.addRuleInstances(FromXmlRuleSet.java:139)
     at org.apache.commons.digester.Digester.addRuleSet(Digester.java:1610)
     at org.apache.commons.digester.xmlrules.DigesterLoader.createDigester(DigesterLoader.java:89)
     at org.apache.commons.validator.ValidatorResourcesInitializer.initialize(ValidatorResourcesInitializer.java:122)
     at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:238)
     at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:181)
     at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1036)
     at org.apache.struts.action.ActionServlet.init(ActionServlet.java:455)
     at javax.servlet.GenericServlet.init(GenericServlet.java:212)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3996)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4266)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:927)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:890)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Need help forum members.....
Please reply to my question 1 which has been asked before as belowDo i need to write explicit javascript function for validation in Struts (or) struts generates the javascript function by itself.??? Please explain with an example....
Edited by: Deepak_A_L on Nov 5, 2009 4:37 PM

Field value not working as "Can grow" when exported in PDF

Hi, I have a unique problem. We have a report which is using a sub-report. When we run that report in Crystal report and preview then it looks fine. This subreport is designated as "can grow" so if the field length is bigger than the size then it is coming in the second row. Everything works fine except when we export this report in PDF.
When we export in PDF then this field is not working as "Can grow" and remaining value of the fields is truncated. This is happening both in XI and 2008 version of Crystal client.
Thanks,

Hi, This is declared as bug by Business Objects Support and Product team will decide if they want to include fix in next release (or fix). This is not possible before Dec 2009 or Early 2010.
Below are the general steps on how to apply the suggested workaround:
1. Remove the on-demand subreport caption, and add an empty string to it instead.
1.1 In the u201CDesignu201D view of the report, right click on the subreport and select u201CFormat Subreportu2026u201D
1.2 In u201CFormat Editoru201D window, under the tab u201CSubreportu201D, click on the u201CX-2u201D button of the option u201COn-Demand Subreport Captionu201D
1.3 In the u201CFormula Workshopu201D window, highlight the text in the formula, and cut it. ( Ctrl-X)
( We are just copying the text, as we need to use the samething for the formula or text object we will use to replace this. )
1.4 Type the following in the formula: u201Cu201D
1.5 Click on the button u201CSave and closeu201D, to close the u201CFormula Workshopu201D
1.6 Back to the u201CFormat Editoru201D window, click on the u201COKu201D button to accept the change.
2. Create a formula or insert a text object in which you add the text or fields you will like to display
( In the following steps we will be using a formula )
2.1 In the u201CField Exploreru201D, right click on u201CFormula Fieldsu201D and select u201CNewu201D
2.2 In the u201CFormula Nameu201D window, type the name of the formula. ( Example: My subreport caption )
2.3 In the u201CFormula Workshopu201D, copy the text you cut in step 1.3, or simply add the database fields and text you will like to display for your on-demand subreport caption.
2.4 Save and close the formula by clicking on the u201CSave and closeu201D button
3. Insert the formula over the on-demand subreport, and resize the field to be of the desired length.
4. Format the formula to display like a hyperlink. ( Blue font and underlined text )
4.1 Right click on the formula inserted in step 3, and select u201CFormat Fieldu2026u201D
4.2 In the u201CFormat Editoru201D, under the tab u201CFontu201D, set the color to blue
4.3 Still under the tab u201CFontu201D, check the u201CEffectsu201D option u201CUnderlineu201D
4.4 Under the tab u201CCommonu201D, check the option u201CCan Growu201D
4.5 Click on the u201COKu201D button to accept the change
5. Move the formula to the back in order to ensure you can drill-down on the on-demand subreport
5.1 Right click on the formula inserted above the on-demand subreport and select u201CMove u2013 To Backu201D
Now, when exporting the report to PDF format, the formula used to replace the u201Con-demand subreport captionu201D that displays more than one line will all be exported.
This workaround has following limitations:
The User can see the service description in two lines because of the u2018Text Objectu2019, the On demand subreport is not growing into the second line in the crystal report since we removed the caption.
So the user has to carefully click on the first line of the description in the main report to open the subreport. If he clicks on the second line then it wonu2019t open the required subreport and it may create confusion.
If we manually stretch out the subreport to occupy two lines space then it will leave a gap in between when we have only 1 line service description.
So plan ahead of time about how lengthy text in su-report would be.

Spry email validation not working [was: Please help!]

When visitors contact me via the contact form on my website ( http://clockdoctors.co.uk/Contact%20me.html) the 'email spry validation field' is not working. The message that i receive in my inbox from this form doesnt show their email address and so i have no way of getting back to them.
Please can anyone help!?
Here is the form-to-mail.php
<?php
$name = $_POST['name'];
$visitor_email = $_POST['email'];
$message = $_POST['message'];
//Validate first
if(empty($name)||empty($visitor_email))
    echo "Name and email are mandatory!";
    exit;
if(IsInjected($visitor_email))
    echo "Bad email value!";
    exit;
$email_from = '$visitor_email \r\n';//<== update the email address
$email_subject = "New Form submission";
$email_body = "You have received a new message from the user $name.\n".
    "Here is the message:\n $message".
$to = "[email protected],[email protected]";//<== update the email address
$headers = "From: $email_from \r\n";
$headers .= "Reply-To: $visitor_email \r\n";
//Send the email!
mail($to,$email_subject,$email_body,$headers);
//done. redirect to thank-you page.
header('Location: http://clockdoctors.co.uk/Thanks20%.html');
// Function to validate against any email injection attempts
function IsInjected($str)
$injections = array('(\n+)',
              '(\r+)',
              '(\t+)',
              '(%0A+)',
              '(%0D+)',
              '(%08+)',
              '(%09+)'
$inject = join('|', $injections);
$inject = "/$inject/i";
if(preg_match($inject,$str))
    return true;
else
    return false;
?>
[Subject line edited by moderator to indicate nature of problem]

Ok this is my, form-to-mail.php. Is this what you need to view or is there something else?
<?php
$name = $_POST['name'];
$visitor_email = $_POST['email'];
$message = $_POST['message'];
//Validate first
if(empty($name)||empty($visitor_email))
    echo "Name and email are mandatory!";
    exit;
if(IsInjected($visitor_email))
    echo "Bad email value!";
    exit;
$email_from = "$visitor_email \r\n";//<== update the email address
$email_subject = "New Form submission";
$email_body = "You have received a new message from the user $name.\n".
    "Here is the message:\n $message".
$to = "[email protected],[email protected]";//<== update the email address
$headers = "From: $email_from \r\n";
$headers .= "Reply-To: $visitor_email \r\n";
//Send the email!
mail($to,$email_subject,$email_body,$headers);
//done. redirect to thank-you page.
header('Location: http://clockdoctors.co.uk/Thanks20%.html');
// Function to validate against any email injection attempts
function IsInjected($str)
$injections = array('(\n+)',
              '(\r+)',
              '(\t+)',
              '(%0A+)',
              '(%0D+)',
              '(%08+)',
              '(%09+)'
$inject = join('|', $injections);
$inject = "/$inject/i";
if(preg_match($inject,$str))
    return true;
else
    return false;
?>

Word substitution does not work on texts

Word substitution does not work when texting. It's fine in all other applications. Not even the pre defined substitutions like "mypin" works within text.

yoyongsc wrote:
Mine doesn't work in all applications, bbm, text, email, etc.
Verry odd! My Word Sub works well in all of those you've listed.
It does not work in commenting on BBM group pictures and in some BBM Channel comments... works every where else.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sound not working for text alert just vibrate

Sound not working for text alert just vibrate and no sound on keyboard

I'm having the same problem, it just started today (11/13/2012).
Settings > Sounds> Text Tone = Tri-tone
Lock Sounds = On
Keyboard Clicks = Off
The mute button is also in the correct place (ring, not mute).

Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

Hello SajidChaudhary,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Have a nice day,
Mario

Validation not working on Qualified Field!!!! is this Normal!!!

Hi All,
I have an Integer field in the Qualified table.
Name-> Non Qualifier -> Type Text
Code -> Qualifier -> type Integer
Now, i need to write a validation which throws error If user enters a number whose length is less than 4 or greater than 4.
The business requirement is User should enter Exactly 4 Numeric values. Not less and not more.
As integer type field done not control Field length i have written a validation.
I have written a validation..
IF(IS_NULL(MAINLOOKUP.Code),1,IF(LEN(MAINLOOKUP.Code)<4 , 0 ))
But this is not working.
this works for a Normal Integer field which is in Main table, But this is not working when Code field is in Qualified table!!!
Is this the normal Behaviour of MDM??
Or am i missing something!!!
Experts please provide your suggestions.
Note: i changed the Code field to Text and made length as 4 in field property, But this is not controlling if user keys in only 2 values.
So written the above validation on text field as well, But it does not work.
Kind Regards
Eva

Hello Eva
Ok
Just imagine
you have some record in your main table with some QLUT
Qlut contain next fields
item_name - type text
item_value - type integer qualified = yes
and list of values
q1
q2
q3
q4
your main table contain next fields
name-text
Qlut->your Qlut
qlut_code->text
qlut_value_>text
For qlut_code create assignment like Qlut.code
For qlut_value create assignment like Qlut.value
add some records to main table like this:
name=test1
in qlut select next:
item name =Q1
item value=1
item name =Q2
item value=2
item name =Q3
item value=3
and another one record in main like this:
name=test2
in qlut select next:
item name =Q1
item value=1
item name =Q3
item value=3
item name =Q4
item value=4
item name =Q3
item value=33
select both records and run both assignments
If your assignments is correct
In first main record you have got
qlut_code=3:Q1;Q2;Q3
qlut_value_>3:1;2;3
for second main record you have got
qlut_code=4:Q1;Q3;Q4;Q3
qlut_value_>4:1;3;4;33
Then you can use records values from qlut_code and qlut_value for validation
This is work fine.
I hope, you have got my point
Regards
Kanstantsin Chernichenka
Edited by: kanstantsin_ch on Oct 6, 2011 1:35 PM

Bind.ref not working for dynamically added fields

I am working on a template that has a table with rows added at the run time. I have to attach fields in each row to an XML tag and child tags. I am using SOM Expression to identify each field in the run time. I have written the code to go in a loop and bind the field at run time but it was not working. So I am just kind of trying out for binding one field using the SOM Expression.
This code was written in the initialize event of the TextField2 with Java Script as the scripting language.
var fieldPath = xfa.resolveNode("xfa[0].template[0].Message[0].Page1[0].Table1[0].Row1[" + 0 +"].TextField2[0]");
fieldPath.bind.ref = "$record.COMMAND.sendApplicationInformationRequest.formNumber";
xfa.form.remerge;
I also tried by changing the reference this way but no luck..
var fieldPath = xfa.resolveNode("xfa.template.Message.Page1.Table1.Row1[" + 0+ "].TextField2");
Can any one help on this?
Thank you
Srini

Hi Steve,
Thank you for your response..
I could not able to open your attachments.. They both say QUEUED..
dynamic-subform-with-data-binding.pdf (150.4 K) QUEUED
form1.xml (533 bytes) QUEUED
Thanks
Srini

PHP email form with Validation - not working

Hello;
I am new to using php. I usually use coldfusion or asp but this site requires me to write in php. I have a form I am trying to get to work and right now.. it doesn't do anyhting but remember what you put in the fields. It doesn't want to send, and it won't execute the validation script for the fields that are required. Can anyone help me make this work? I'm confused and a definate newbie to PHP.
Here is my code:
<?php
              $PHP_SELF = $_SERVER['PHP_SELF'];
              $errName    = "";
              $errEmail    = "";
              $errPhone    = "";
              if(isset($_POST['submit'])) {
                      if($_POST["ac"]=="login"){
                    $FORMOK = TRUE;    // $FORMOK acts as a flag. If you enter any of the conditionals below,                             // it gets set to FALSE, and the e-mail will not be sent.
                    // First Name
                    if(preg_match("/^[a-zA-Z -]+$/", $_POST["name"]) === 0) {
                        $errName = '<div class="errtext">Please enter you name.</div>';
                        $FORMOK = FALSE;
                    // Email
                if(preg_match("/^[a-zA-Z]\w+(\.\w+)*\@\w+(\.[0-9a-zA-Z]+)*\.[a-zA-Z]{2,4}$/", $_POST["email"]) === 0) {                                                    $errEmail = '<div class="errtext">Please enter a valid email.</div>';
                        $FORMOK = FALSE;
                    // Phone
                    if(preg_match("/^[a-zA-Z -]+$/", $_POST["phone"]) === 0) {
                        $errPhone = '<div class="errtext">Please enter your phone number.</div>';
                        $FORMOK = FALSE;
                    if($FORMOK) {
                            $to = "[email protected]";
                            $subject = "my. - Contact Form";
                            $name_field = $_POST['name'];
                            $email_field = $_POST['email'];
                            $phone_field = $_POST['phone'];
                            $city_field = $_POST['city'];
                            $state_field = $_POST['state'];
                            $message = $_POST['comment'];
                            $message = "
                            Name: $name_field
                            Email: $email_field
                            Phone: $phone_field
                            City: $city_field
                            State: $state_field
                            Message: $message";
                            $headers = 'MIME-Version: 1.0' . "\r\n";
                            $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n";
                            // Additional headers
                            $headers .= 'To: <[email protected]>' . "\r\n";
                            $headers .= '[From] <$email_field>' . "\r\n";
                            // Mail it
                            mail($to, $subject, $message, $headers);
                            header("Location: thankyou.php")
                            // I have no idea what these next 3 lines are for. You may just want to get rid of them.
ini_set("sendmail_from","[Send from]");
ini_set("SMTP","[mail server]");
mail($to, $subject, $message, $headers);
                            } else {
                            echo "Error!";
                    ?>
<form method="post" action="<?php $PHP_SELF ?>" id="commentForm">
<input name="name" size="40" value="<?php echo $_POST["name"]; ?>" type="text">
                     <?php if(isset($errName)) echo $errName; ?>
<input name="email" size="40" value="<?php echo $_POST["email"]; ?>" type="text">
        <?php if(isset($errEmail)) echo $errEmail; ?>
<input name="phone" size="40" value="<?php echo $_POST["phone"]; ?>" type="text" id="phone">
        <?php if(isset($errPhone)) echo $errPhone; ?>
<input name="city" size="40" value="<?php echo $_POST["city"]; ?>" type="text" id="city">
<input name="state" size="40" value="<?php echo $_POST["state"]; ?>" type="text" id="state">
<textarea name="comment" cols="30" rows="10" id="comment"><?php echo $_POST["comment"]; ?></textarea>
<input type="submit" value="Submit" name="submit" class="contact-submit" />
</form>
It seems pretty simple.. but it's not working at all. I would also like this page to submit to it's self, and when it actually does send an email, to just make the form disappear and replace it with the thank you text instead of sending you to another page. I also do not need to use an smtp server, it goes directly to the network server when sent.
I'm really sorry to ask all of this, I'm trying to learn this language and need to make this work.
Thank you for anyones help in advance.

.oO(BarryGBrown)
> I have a php file which generates an email from a form
in a website I have
>designed. I just want to make some areas of the final
generated email in bold
>text. I know if people have plain text only selected in
their email client they
>won't see the bold text, but at least it will reach a
certain percentage of
>users.
You can't do bold text in a normal email. Plain text is just
that -
plain text. For anything more you need HTML. _If_ you should
need it.
Usually plain text serves pretty well and is the most
efficient way.
> the line in question is -
>
> $body ="Booking request details from website:\n\n";
>
> I have tried putting and ,
syntax is used in some forum software, but besides that it
has
no meaning whatsoever.
>inside the inverted commas, outside
>etc, plus tried different declarations within the
<head>, nothing works! What
>am I doing wrong?
You would have to create an entire HTML email with all the
required
headers and boundaries. Quite difficult to do by hand with
PHP's mail()
function.
> I am a beginner with this php stuff, please be kind!
Then you should start simple with plain text. There are some
classes out
there which make it easy to generate text and HTML emails
(phpmailer for
example), but you should be familiar with PHP coding if you
want to use
them.
Micha

Spry validation not working in IE9

I am using DW CS5.5 and have a form on a PHP page and have set spry validation for 2 text fields and a textarea.
Also using CAPTCHA on the form.
The 2 text fields are a simple required validation and the textarea is required plus a max character validation
It works in Firefox, Chrome, Safari, Opera, and IE Compatibility View, but does not work in IE9.
The CAPTCHA works in IE9 and all other browsers but can't get the spry validation to work.
Here is the page
http://www.fandapartyrentals.com/testimonials.php

altruistic gramps wrote:
It is up to you, you could remove the counter; personally I would leave it there because once the focus has moved from the text area, the number of (remaining) words will show.
Another solution is to force IE8 standards document mode as in
<head>

<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" >
<title>My webpage</title>
</head>
The problem with the above is that the rendering will also follow IE8 mode.
Gramps
Thanks for your help,
I used the meta tag to emulate IE8 and it works as needed.

Dynamic Action with field DIVGV not working

We have built the dynamic action below to default values from infotypes 0007 and 0008 behind the screnes in infotype 0491 Payroll Outsourcing. The issue that we are having is that the dynamic action will not work for field P0008-DIVGV, but will work with all the other fields.
The only difference between the DIVGV field and the rest of the other fields mentioned in this dynamic ation is that it seems to be a free text field (which you can modify), even though the values are pulled from the work schedule rule in infotype 0007. We have also hidden the DIVGV field in 0007 per client requirement.
Does anyone have any suggestions on how to get this working. Do we need to populate these values in any of thh HR tables first?
06     10     *     *** COP 0491 US PAYROLL OUTSOURCING ***
06     12     P     T001P-MOLGA='10'
06     14     I     COP,0491,,,(P0008-BEGDA),(P0008-ENDDA)/D
06     16     W     P0491-OTF06='PS TYPE'
06     18     W     P0491-OTV06=P0008-TRFAR
06     20     W     P0491-OTF07='PS AREA'
06     22     W     P0491-OTV07=P0008-TRFGB
06     24     W     P0491-OTF08='WORK SCHEDULE RULE'
06     26     W     P0491-OTV08=P0007-SCHKZ
06     27     W     P0491-OTV09='WORK HOURS/PERIOD'
06     28     W     P0491-OTV09=P0008-DIVGV

Hi Damas,
it seems to be no specific reason for not updation P0008-DIVGV only.Please cross check whether field is populating or not in Infotype 0008, before dynamic action triggered, other that that there is no reason.

Field validation not working if text added to SO Header.

Similar Messages

Maybe you are looking for