Field value as file name when export as fdf

When running a batch process in Adobe Acrobat Professional that exports a pdf as fdf to a file path, is there a way to name the file with one of the pdf field values?

Hi,
Please check the below link..
Number ranges for Spool Requests
hope it may help you
Kuber

Similar Messages

  • How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

    I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name  changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

    This has been discussed a few times, and here is a summary of the usual solutions.
    http://forums.adobe.com/message/2989508#2989508
    What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai  and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg,  filename-02.jpg, and then everytime you use export artbaords those names will replace.
    I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

  • Changed File Name but reverts to original file name when exported or copied

    I created a folder of 150 photos for a video montage and numbered them all by editing the file name. When I export (or copy and paste) the images to a folder on my desktop, the files all revert back to their original file names. Any ideas?

    In iPhoto what you see originally is the file name as the title. Any changes to it remain in iPhoto unless you export out with the appropriate options to either same the title with the file and/or use the title as the file name.
    When you export the photos via the File->Export->File Export menu option there's a File Name drop down menu at the bottom from which you can select Use Title. That will give you the Titles you changed as the new file name.
    OT

  • BUG: Cannot amend a file name when exporting an image, without overtyping

    I've raised this on 4 bug reports now and had a live chat and been recommended to post this here.
    I've even gone to the trouble of screen capturing the bug as its hard to explain as the text explanation is confusing:
    When you select the file in the file view to get the name to appear in the file name input box, the name appears in the input box and  becomes highlighted.
    If you then click on the text to de-highlight it (as I want to amend it with a _v2 or _v3) as soon as you do ANY key press the whole text in the input box gets re-selected, meaning that any further key presses type over the file name.
    I then end up with a file name called "v2", as the underscore causes the selection and the V2 types over.....FRUSTRATING!
    This happens on all of our machines win7 and 8, but not in ANY of the other Adobe cloud programs. It seems like a simple FOCUS bug in the UI coding.
    Here's the video:
    Adobe Flash Issue - YouTube

    In Flash Pro CC 2014 on Win 7 Pro, yes it does the same thing. Any keyboard key I hit will work, but then the entire filename is selected. I'm so used to working with text from coding that I reflexively saw the selection and used an arrow key to deselect and move back to the spot I wanted to edit. It's definitely a hiccup and I would report it to the bug/wish form.
    Adobe - Feature Request/Bug Report Form

  • Hi, error message: "illegal file name" when exporting a .mov file in final cut 7.

    why I got this error message? I used this name before and wish to save it after some editing. System asked me "do I want to replace it?", I answered 'yes', then "illegal file name came up?"
    It accepted it the first time, why I got this name the second time ?
    Please help. thanks.

    Can't say why but it happens; maybe a bug. (If it is we know it will never be fixed.) Anyway, it's not a bad practice to use "save as" – appending the date, or some other code to be able to track versions.
    Good luck.

  • Keeping file names when rendering out DPX to QT

    I am trying to convert a dpx sequence to a quicktime to use for offline editing. When I export the files it does not keep the original file name. It replaces the file name with 1_g1, 2_g1 and so on. I cannot find a way to tell color to keep the orginal file name on export. I still new to Color , but I am quite familiar with encoding programs. Is there really not a way to keep the meta data including the original file name when exporting files?

    There's a Chapter on this in the online Color Help...

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • Same file name when downloading new pics

    The prev camera I had (Sony Cyber shot/Steady Shot?)always kept dynamic file numbers/names however now have Nikon D90 and now if do search on a file number now get numerous pics under same file name as new camera restarts at same number all the time.
    Is there an easy way to deal with this. I would really not want to have to rename all files as soon as I download them. That can be over 300 pics at a time.
    Any help would be greatly appreciated! Thanks!

    When I say file name I mean the name/number that appears under the pic in iphoto.
    Yes that is the file name
    Do most people leave these numbers or change them, do you know?
    Most people leave it - some preprocess all photos and assign meaningful file names and then import
    I know you can assign words to them and then retrieve them by calling up all pics associated with that word(s).
    You can assign a title (which can optionally be used as the file name when you export photos), a description, keywords, and a rating
    Do you have any other hints for me? Do you use the Mangler software you referred to in the prev post?
    Normally I do not modify the file names - if I get photos from someone else I usually use name mangler to identify the source (which I could do with keywords but for photos that are not mine I prefer having the file name show the source) - once in a while I will change some but normally I just import directly from the camera and ignore the file name
    LN

  • Ipad only uses one file name when uploading images via email

    We have an image tool that uploads images to a template website. The problem is the file names for these images must be unique any duplicate file names will be rejected. Some of our users want to be able to upload from the field but Ipad only assigns the file name "photo.JPG" to jpegs. It doesn't seem to include the sequential extension that actually does exist for the image on the file name when uploading. Is there a way to get ipad to do so, or is this something that Apple maybe want to consider looking into. I can easily see the average Joe emailing themselves images and hitting save only to replace and lose an older image because let's face it, not all users are on MACs and PC's do not allow multiple files to have the same file name in the same folder.

    Hi,
    Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
    For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
    If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
    Here is an article about message tracking log for your reference.
    Get-MessageTrackingLog
    http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Copy&paste file names when bouncing

    too bad, after upgrading to 7.1.0 it is still impossible to copy&paste file names when bouncing, as was no problem in LP6! That´s very time consuming for me, because for film music I usually have long file names that contain smpte codes. Does anybody have a shortcut?

    Hi Orbanl, I was going to post this myself and then found your post so will add to it.
    'It used to be in Logic Pro 6 that normal copy/paste worked in the 'name' field of the save and bounce windows (even kept them seperate as far as clipboards went). Now, in Logic 7.1 the only way I can initiate a copy or paste when saving the song or naming the bounce is a right mouse click (cntrl-click)? to bring up these options. Are there no key commands for the navigation services anymore? This is a huge time killer for me as I often save 60~100 files with the same root name and was able to quickly initiate and save/bounce without stopping to pick up the mouse (now I have to switch back and forth between the keyboard and mouse to initiate, name copy+paste and modify name). Thanks in advance.'
    Over at the Logic Pro Forum, Peter suggested in response to this post that the Pro App Support update v3 might have something to do with it as his Logic 10.3.9 DOES support normal copy/paste commands! Unfortunately I am running 10.3.8 and the Pro App update v3 specically notes 10.3.9 as its requirement. The only reason I have not upgraded to 10.3.9 is I use a lot of esoteric shareware music software and I understand 10.3.9 had some 'sprinkling' of Tiger in it that at least for several friends of mine broke older app's that were running fine in 10.3.8.
    Here is the link if you are running 10.3.9.
    Pro Application Update 3.0

  • How do I get my photos to sort by file name when sync'd to the iPad?

    How do I get my photos to sort by file name when sync'd to the iPad?  The default sorting method changes the order of pictures when sync'd from my pc.

    http://support.apple.com/kb/HT4221

  • How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

    How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
    I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
    I have spent over an hour with techincal support who were unable to provide me with an answer

    It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
    You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

  • In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

    In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

    I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
    ~/Library/Application Support/Aperture/Plug-Ins/
    where ~ is the home location for the current user account. All the other plug-ins however were installed in
    Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
    which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
    Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

  • Float4() causes "error saving Pixel Bender Byte Code file" error when exporting for flash player

    Simple test
    <languageVersion : 1.0;>
    kernel untitled
    <   namespace : "Your Namespace";
        vendor : "Your Vendor";
        version : 1;
    >
        input image4 src;
        output pixel4 dst;
        void
        evaluatePixel()
            dst = float4(sampleNearest(src, outCoord()));
    The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
    "dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.

    Thank you for the error report.  I'll put it into our bug database.  We're bottling things up for the current version.  Gven the workaround, it is unlikely we'll be addressing this bug soon.  Please accept my apologies for the annoyance this will cause.
    In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is?  If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
    Thanks,
    Chuck.

  • Indesign CS4 "forgets" file name when saving as Postcript file.

    Like the title says Indesign CS4 "forgets" file name when saving as Postcript file.
    Example:
    I open up indesign CS4 and open up a file called "test5". Then I go to the print menu and save it as a postscript file. Once the save as dialog box comes up it wont say "test5" but it uses whatever file name I used last time I created a PDF. 
    I want indesign to recognize that when I create a postscript file that I want it to be named the same way as my file that is open at that moment. Changing the file name every time is not bad when they are called "test5" etc but here at this company we use super long file names and it's a pain to change it every time.
    Funny thing: Some machines here do it the way in the example but other machines will do it the correct way by using the same name in the save as box.
    Any suggestions on how to fix this? If something is not clear just ask!

    How about this - it's a workaround, I can't change ID or your system.
    I'm big on EXACT filenames also, case and space sensative. Do a "Save As" before printing - the file name should be correct and highlighted, ctrl+c copy, escape/cancel the Save As. Paste in the filename during the Save as Postscript File.

Maybe you are looking for

  • My iPhone 5 won't link to my bluetooth headset.

      My iPhone 5 won't link to my bluetooth headset (Samsung).  It  just continuously shows 'searching'.  I've restarted the phone and bluetooth headset (fully charged) but it still can't find it.

  • How can I update my 8g ipod touch from 4.2.1 to something higher?

    I have an 8G ipod touch with ios 4.2.1 which won't allow me to download most apps. I want to update it to a higher ios but when in itunes, when I click on the check for updates, it just idicates that the ios 4.2.1 version is already on the ipod.  How

  • Can't send mail to external recipients

    When I invite a new member to a collaboration room, and this member is registered in active directory with an email adress, all invitation and notification mail work as they should. However. I want to invite external users(external to our company) in

  • Invoices Printing issues

    The invoices when printing are not coming out in order. It prints page one, then page 3, then page 6. Can anyone help me on this?

  • Centering Label Text over front Panel Indicator

    How can I get the Text in the Label of a Front Panel LED Indicator Control in LabVIEW 2009 to be centered over the LED? How can I change the Font an Font Size of the Text of a Label?