Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE543

Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
Balla

Hi,
If you get error msg KE543 i.e 'Field ... not contained in nametab for table CE1E_B1' then (even if you don't use E_B1)
Run report RKEAGENF for banking template operating concern E_B1.
The selection fill up as follows:
Operating concern: "E_B1"
Structure: leave blank
Type of CO-PA: "1"
Refill? : "X".
Then a run of report RKEAGENV should proceed successfully.
regards
Waman

Similar Messages

Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE54

Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
Balla

Hello,
You try follow the instructions in SAP note 872175 and apply solution of the SAP note
942785 in order to successfully run program RKEAGENV i.e run the program
RKEAGENV in the debug mode and set the parameter no_jb to 'X'.
It is not enough to just apply the coding corrections in the notes.
You also need to follow the instructions mentioned in both the notes.
1. Activate and Execute report ZJBREOFC
2. Run report RKEAGENF for banking template operating concern E_B1.
   The selection fill up as follows:
     Operating concern: "E_B1"
     Structure: leave blank
     Type of CO-PA: "1"
     Refill : "X".
Then a run of report RKEAGENV should proceed successfully.
Regards,

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'?

Gurus,
when user is updating size grid in matl master, the third party legacy system is reciving the bwlow error:
SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'
could u all pls advise as why this error occured?
Thanks in advance..

t100 is the table that holds all messages in SAP.
The key to access this table is the message class and the message number.
Reading the message that you provided, it looks like SAP is searching for a message number 000 without having a message class.
Do you use any exit with own programming ?
You probably need to debug the program to find the root cause

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

EWS/Services.wsdl does not contain a definition for ConnectingSID.ItemElementName in Exchange 2013

We're using EWS (unmanaged) in a .NET app to access Exchange Server. After moving from 2010 to a server with Exchange 2013 and updating the web reference, I get error messages stating ConnectingSIDType does not contain a definition
for ItemElementName or PrimarySmtpAddress.
If I point the ExchangeServiceBinding object url to the new server, but do NOT update the web reference to the new server, everything still works. How do we fix this issue? The 2010 Exchange server will go away within a few days.

This is the 2010 version
public partial class ConnectingSIDType {
private string itemField;
private ItemChoiceType itemElementNameField;
/// <remarks/>
[System.Xml.Serialization.XmlElementAttribute("PrimarySmtpAddress", typeof(string))]
[System.Xml.Serialization.XmlElementAttribute("PrincipalName", typeof(string))]
[System.Xml.Serialization.XmlElementAttribute("SID", typeof(string))]
[System.Xml.Serialization.XmlElementAttribute("SmtpAddress", typeof(string))]
[System.Xml.Serialization.XmlChoiceIdentifierAttribute("ItemElementName")]
public string Item {
get {
return this.itemField;
set {
this.itemField = value;
/// <remarks/>
[System.Xml.Serialization.XmlIgnoreAttribute()]
public ItemChoiceType ItemElementName {
get {
return this.itemElementNameField;
set {
this.itemElementNameField = value;
2013 version
public partial class ConnectingSIDType {
private object itemField;
/// <remarks/>
[System.Xml.Serialization.XmlElementAttribute("PrimarySmtpAddress", typeof(PrimarySmtpAddressType))]
[System.Xml.Serialization.XmlElementAttribute("PrincipalName", typeof(PrincipalNameType))]
[System.Xml.Serialization.XmlElementAttribute("SID", typeof(SIDType))]
[System.Xml.Serialization.XmlElementAttribute("SmtpAddress", typeof(SmtpAddressType))]
public object Item {
get {
return this.itemField;
set {
this.itemField = value;
And here is the impersonation code
ExchangeImpersonationType impersonate = new ExchangeImpersonationType();
impersonate.ConnectingSID = new ConnectingSIDType();
impersonate.ConnectingSID.Item = _email;
impersonate.ConnectingSID.ItemElementName = ItemChoiceType.PrimarySmtpAddress;
this.ExchangeService.ExchangeImpersonation = impersonate;
ConnectingSID.ItemElementName doesn't exist in the 2013 version. Is there a different way to do impersonation without going to the managed API?

Help Solving: Does not contain a definition for 'Select'.....

Hi,
Need help solving a Task that returns a Task<IEnumerable<Writing>> so I can fill ObservableCollection<ViewModels.IWritingItemViewModel> Writings for my
Design Time Data Page:
<d:Page.DataContext>
<designTimeData:MainPageViewModel />
</d:Page.DataContext>
My constructor does this:
public MainPageViewModel()
var writings = this.GetGroupsAsync();
this.Writings = new ObservableCollection<ViewModels.IWritingItemViewModel>();
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
My var writings = this.GetGroupsAsync(); is:
public async Task<IEnumerable<Writing>> GetGroupsAsync()
await this.GetMenuDataAsync();
return this.Groups;
which in turn gets data from:
private async Task GetMenuDataAsync()
Uri dataUri = new Uri("ms-appx:///DesignTimeData/MenuData.json");
StorageFile file = await StorageFile.GetFileFromApplicationUriAsync(dataUri);
string jsonText = await FileIO.ReadTextAsync(file);
JsonObject jsonObject = JsonObject.Parse(jsonText);
JsonArray jsonArray = jsonObject["Groups"].GetArray();
foreach (JsonValue groupValue in jsonArray)
JsonObject groupObject = groupValue.GetObject();
Writing group = new Writing(
groupObject["UniqueId"].GetString(),
groupObject["IsHeaderInteractive"].GetBoolean(),
groupObject["ViewType"].GetString(),
groupObject["ModelType"].GetString(),
groupObject["Page"].GetString(),
groupObject["Title"].GetString(),
groupObject["Subtitle"].GetString(),
groupObject["ImagePath"].GetString(),
groupObject["Description"].GetString(),
groupObject["GroupId"].GetString()
foreach (JsonValue itemValue in groupObject["WritingMenus"].GetArray())
JsonObject itemObject = itemValue.GetObject();
group.WritingMenus.Add(new WritingMenu(
itemObject["UniqueId"].GetString(),
itemObject["Page"].GetString(),
itemObject["Title"].GetString(),
itemObject["Subtitle"].GetString(),
itemObject["ImagePath"].GetString(),
itemObject["Description"].GetString(),
itemObject["Content"].GetString(),
itemObject["WritingsId"].GetString(),
itemObject["GroupId"].GetString(),
Convert.ToInt32(itemObject["Item"].ValueType)
this.Groups.Add(group);
and I get this Error:
Error 5 'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a using directive or an assembly reference?)
I'm creating collections of:
public interface IWritingItemViewModel : Common.IVariableSizedItem
Models.Writing Writing { get; set; }
and my class for creating data is:
public class Writing
public Writing(
string uniqueId,
bool isHeaderInteractive,
string templateType,
string viewModelType,
string page,
string title,
string subtitle,
string imagePath,
string description,
string groupId
this.UniqueId = uniqueId;
this.IsHeaderInteractive = isHeaderInteractive;
this.TemplateType = templateType;
this.ViewModelType = viewModelType;
this.Page = page;
this.Title = title;
this.Subtitle = subtitle;
this.ImagePath = imagePath;
this.Description = description;
this.GroupId = groupId;
this.WritingMenus = new ObservableCollection<WritingMenu>();
public string UniqueId { get; private set; }
public bool IsHeaderInteractive { get; private set; }
public string TemplateType { get; private set; }
public string ViewModelType { get; private set; }
public string Page { get; private set; }
public string Title { get; private set; }
public string Subtitle { get; private set; }
public string ImagePath { get; private set; }
public string Description { get; private set; }
public string GroupId { get; private set; }
public virtual ObservableCollection<WritingMenu> WritingMenus { get; private set; }
How can I solve or successfully complete this code?
Thanks!...
Code is like a box of chocolates!...

I looked into your error message again, I found something interesting:
Error 5
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition
for 'Select'
and no extension method
'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a
using directive or an assembly reference?)
That means: Task does not contain the definition for Select. This was reasonable, Task does not inherit IEnumerable interface.
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
public async Task<IEnumerable<Writing>> GetGroupsAsync()
You need get the IEnumerable<Writing> for Select use. See this for more information:
How to: Return a Value from a Task
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Database does not contain a URL for the file

How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
      ,[DigestAlgorithm]
      ,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC   Error   w3wp.5   ClientImplementation.GetExtendedUpdateInfo   System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
   at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
   at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at System.Web.Services.Protocols.WebServiceHandler.Invoke()
   at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
   at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
   at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
   at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

PropertyInfo does not contain a definition for 'GetCustomAttribute' ?

Hello,
I inherited a .Net 4 Asp.net web application . I did a build and got the error below. According to MSDN, PropertyInfo doesn't have a GetCustomAttribute method. (It does have a
GetCustomAttributes method). Am I missing a extension method? Or using wrong version of .net framework? Thanks, Peter
xxx= property.GetCustomAttribute<JsonPropertyAttribute>();
Error 1 'System.Reflection.PropertyInfo' does not contain a definition for 'GetCustomAttribute' and no extension method 'GetCustomAttribute' accepting a first argument of type 'System.Reflection.PropertyInfo' could be found (are you missing a using
directive or an assembly reference?) C:\projects\DotNetDemo\WebSite\CreateIncident.aspx.cs 357

I think that you need a “using System.Reflection” and the .NET 4.5:
http://msdn.microsoft.com/en-us/library/hh194315(v=vs.110).aspx.

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

Error while deploying BPM : DC bpm_0/bl/ddic does not contain any archives for deployment

Hi All,
I'm using SAP PO 7.31 single stack. I've created a simple BPM in NWDS. I'm able to successfuly build the BPM which I created but when I "Deploy" it throws the below error.
DC bpm_0/bl/caf/metadata does not contain any archives for deployment
DC bpm_0/bl/ddic does not contain any archives for deployment
DC bpm_0/bl/caf/dictionary does not contain any archives for deployment
Not sure what/where to check and fix the issue. Can you please help me in fixing the issue?
Thanks
Raj.

Dear Raj,
I am looking into this.
In the meantime can you try this also.
xxx/pr/pm: Deployment error,&nbsp;GD&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&a…
Thanks & Regards,
Patralekha

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account in order to access Icloud?

If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information. Note: this only deletes the account and any synced data from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

External Library DC does not contain any archives for deployment

Hi Experts,
I am currently trying to deploy an external library dc with the required external jars for an EP application.
However, I am getting the following message when deploying the DC:
DC dc_lib does not contain any archives for deployment
I have already created the public parts and added the necessary jars to the assembly and compilation PPs. I have followed the link below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/006a6229-b1ed-2e10-0c8c-cc5673cf268f?QuickLink=index&…
May I know if there's anything I have missed?
Regards,
Greg

i deployed both, ear dc successfully deployed but lib dc has the warning above.
upon checking portal it has exception:
portalRuntimeException: There is no portal component associated with the following context.

VL463 - No distribution: Delivery does not contain items relevant for dist

Dear Experts,
When we slect multiple Deliveries from VL06 and distribute, Only few get distributed and others fail.
The error log shows: VL463 - No distribution: Delivery does not contain items relevant for distribution.
However, If I select these deliveries individually or say 4 or 5 deliveries at a time and distribute, deliveries get distributed.
If I select more nunbers (ex: 12 or more), only 3 gets distributed and others fails with above message?
Any inputs on this are most welcome.
Regards,
Shetty

Hi,
Check in OVLK
Which distribution mode you maintained in delivery type it should be Distribution according to the settings for the warehouse number
Also check in Logistics Execution --> Decentralized WMS Integration --> Central Processing --> Application --> Activate Decentralized WMS.
Kapil

I have a verizon ipad2 but i don't want to sign up for the 3g. I keep getting the irritating "you have not yet signed up for an account" message. how do i stop it?

have a verizon ipad2 but i don't want to sign up for the 3g. I keep getting the irritating "you have not yet signed up for an account" message. how do i stop it?

never mind -- i found the answer in the "more like this" box. kudos, apple...

Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE543

Similar Messages

Maybe you are looking for