Fieldpoint-2010 not found, some IP problem ?
Hello.
I try little say what is what I know. I'm automation student in Finland and I should connect MetsoDNA PC-operator and Fieldpoint-2010 together. I'm doing my graduation work and I have big problem what I donät understand.
We have old system where is LAbview (version 6 or something about year 2002) and that is connect in Fieldpoint. Everything work nice and no problem. Now I should chance to Metsodna in place of labview. And that is problem, because Metso is plugging to Cisco 2950 switch and there should come ethernet connect to fieldpoint. Old labview IP connect is 195.148.xxx.xxx and subnet 255.255.255.0, defaultgateway 195.140.144.20 DNS server 195.148.144.20. Thats work nice and I chance my own computer IP for that and everything work. But when I chance my computer in Metso IP address nothing works. IP is 10.83.xx.xxx and subnet same what Labview, Gateway 10.83.86.1 DNS 195.148.144.100.
So I see that problem is DNS is last numbers different chance 20 to 100 and gateway is different.
But how I get to fieldpoint give connection to these address?
That is only the first and biggest problem. Then I should made OPC connect to that, but one step in time. If I could made that connect to work I have lot of easier to take next step.
Best regards
Kimmo
Hi MariusU
Yes I tried. In croscover ethernet cable and rs232, no connect. And there was 3com switch between labview computer and fieldpoint and I connect my computer 3com switch and nothing.
Okey my own computer addres was other then, and when I chance that in labview computer address everything works and I get connect to fp-2010.
I know that Metso is not NI product, but there is windows computer where I tried to connect that. And not to direct MetsoACN, I should still get connect I think. Maybe is wrong say that computer is Metso or Labview, but this how i tried to idenfication these, that you know what i tried to say. These both is normal PC.
I tried to Ping in FP-address and nothing, but when I chance computer Labview computer IP addres that works over to Cisco.
So does FP block some IP address or what is wrong. Like I say first post I got connect over to Cisco same address what is Labview computer, but if IP, gateway,dns is same than other automation network in school that doesn't connecting. I should do OPC-connect to between these and if I doesn't get any connect to there, I cant also do that.
I think that Fieldpoint support OPC or so I read in web pages.
-Kimmo-
Attachments:
January Fieldpoint.pdf 637 KB
Similar Messages
-
"Not Found" Error Message Problem
Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
EmilyThey were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help! -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
-
Web Services in CF10, components not found - Java vendor problem?
Is anyone having problems invoking web services in CF10, IIS 7, Java Oracle? We recently upgraded, and the web services are now returning the following error that the component can't be found:
The web service operation caused an invocation exception.
The root cause was that: coldfusion.runtime.CfJspPage$NoSuchTemplateException: Could not find the ColdFusion component or interface
Should the web service be created in cfadmin? It won't let me. I was understanding the calling the webservice from cfinvoke would create the webservice, but it isn't.
Any information outside of the Adobe documentation which I've read would be helpful.
We have this identical file running on four different servers. It works on two of the four. The only difference I see in the server settings besides the version of CF and the operating system, is the vendor/version of Java.
1. CF10, Java Sun, IIS 7.5.7600.16385 - working
2. CF8, Java Sun - working
3. CF10, Java Oracle - not working
4. CF10, Java Oracle, IIS 7.5.7600.16385 - not working
Thank you.It turns out that it was a directory nomenclature issue. The directory had a period in it (e.g., domain.org). Once the period was removed from the directory name, it worked. For whatever reason, it worked fine in CF8 but not CF10. I hope this helps someone else.
-
HELP! Package with orange, registration problem, setup wizard pages not found and email problems!
I got my blackberry 2 days ago (I'd never had one in the past) and the sales advisor told me I would need the 'blackberry package' for £5 a month and being the fool that I am I agreed without asking for more information on what it included etc. I can get on the internet using my home wifi or any other free wifi connection I happen upon, but cannot use applications such as Facebook for Blackberry without being confronted with a message claiming 'You are currently on a service plan that does not support this application. Please contact your service provider for additional information or to upgrade your current service plan.' I had thought that the package I had been given would be for this, does anyone know how long it should take before the package is activated?
Also, when visiting www.blackberry.orange.co.uk and asked to give my PIN and IMEI it claims that it is currently registered with a different service provider. Has anyone else found this or know a way to fix it?
Actually, while I'm here, when running the setup wizard a lot of the pages come up with HTTP ERROR, PAGE CANNOT BE FOUND and when attempting to set up my email I only have the options to 'i want to use a work email account with a blackberry enterprise server' or 'i want to skip email setup'. How would I set up a hotmail email account?
Message Edited by hayley_rose1989 on 02-07-2009 06:53 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:54 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:55 PM
Message Edited by hayley_rose1989 on 02-07-2009 06:58 PMthe blackberry package is a good thing. the problem is that is seems you have had problems creating your BIS Account. Call Orange UK hotline and explain your issue. It's their job to make everything work. especially since you are a new customer.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
OWA 2010 not receiving some emails
The environment where I work uses Cisco IronPort to scan emails and then send them on or reject them. I have spoken with Cisco Support and they have found that the IronPort is sending the emails once scanned on to OWA which seems to occasionally
not accept the messages. Is there a specific spot where I should start to find out why this is happening?hi can you please check in ECP about the message tracking and see where the message is going. is it only happening with OWa..?? and not with outlook
TAKEN from a old post
If the message tracking says that they are delivered to the mailbox, then they should be there. If the messages seem to disappear from the tracking logs before it says that they are delivered, then it is
anti-spam or anti-virus running on the server that is grabbing them. Have you tried requesting a delivery and a read receipt when you send the test messages from Gmail? You may recieve an NDR that says something like 'the message was deleted without
being read', or 'the recipient mailbox is too full'.
Mark as useful or answered if my replies helped you solving your query.
Thanks, Happiness Always
Jatin
Skype: jatider2jatin, Email: [email protected] -
Org.flexunit.listeners.UIListener not found, and other problems
I have a basic setup of FlexUnit that comes with the latest FlashBulider. I import a bunch of SWC's in my project and try to follow instructions from here:
http://docs.flexunit.org/index.php?title=Setting_up_a_FlexUnit_4_Project
I got an error saying defintion of UIListener could not be found.
Then I checked the AS docs here: http://docs.flexunit.org/asdocs/index.html
And found out there is no UIListener class at all
So I realized that core.addListener takes IRunListener, and change the code to this:
core.addListener(IRunListener(uiListener));
Sadly, when run. there was a runtime error with this line:
<flexui:TestRunnerBase id="uiListener" width="100%" height="100%" x="0" y="0" />
Saying TestRunnerBase does not implement the IRunListener intarface,The UIListener is not in the core project, it is in the UIListener project, so unless you have that one as well, you will not have the UIListener.
My guess though is that it is a TestRunnerBase issue. TestRunnerBase isn't something we wrote for FlexUnit 4. It is an adaption of a FlexUnit 1 concept to give people a familiar environment as a default test runner. The goal is to eventually write a new one for FlexUnit 4 but our priorities were features and IDE integration.
All of that said, I am guessing the flexui namespace in your project is pointing to an older version of the TestRunnerBase buried somewhere in the FlexUnit .9 project. We include FlexUnit .9 in its entirety for compatibility reasons, but it means that you can sometimes reference older classes. The appropriate namespace should be:
http://www.adobe.com/2009/flexUnitUIRunner
If that doesn't work, then you are missing the FlexUnit4UIListener.swc and your namespace is probably set differently. Here is another thread on this same issue:
http://forums.adobe.com/message/2252570#2252570
When configured correctly, your MXML file should read something like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="runMe()" xmlns:adobe="http://www.adobe.com/2009/flexUnitUIRunner">
<mx:Script>
<![CDATA[
import org.flexunit.listeners.UIListener;
import compilationSuite.SuitesToRun;
import org.flexunit.runner.FlexUnitCore;
private var core:FlexUnitCore;
public function runMe():void {
core = new FlexUnitCore();
core.addListener( uiListener );
core.run( compilationSuite.SuitesToRun );
]]>
</mx:Script>
<adobe:TestRunnerBase id="uiListener" width="100%" height="100%" />
</mx:Application>
I will give the wiki page you reference a read today and see if I can make things clearer,
Mike -
Server not found messages and problem loading page message since I updated to the latest version of Firefox. Usually will load the 2nd time after hitting the try again option.
Does not happen with Internet Explorer at all.See:
*http://kb.mozillazine.org/Error_loading_websites -
[SOLVED] sudo and "command not found" problems
Ok, the problem I've got is this: sudo has suddenly started acting real strange. It can't find any programs. For example, if i type
sudo echo
It just goes
sudo: echo: command not found
And another problem I've got, is that as a regular user, it can't find programs in /sbin, or other "exotic" places. For example it can't find firefox, because it's not in /usr/bin or /bin, but in /opt/mozilla/bin.
Please, help me!
Last edited by mrpedroxx (2008-06-14 13:23:49)sudo -V outputs this
Sudo version 1.6.9p15
$PATH outputs
bash: /usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.: No such file or directory
pacman -Q firefox outputs
firefox 2.0.0.7-1
Yeah, maybe I should update it anyway
And /var/log/errors.log does contain stuff about hard disks, but it's just me mounting my iPod and the Windows partition on my hd -
Hi Experts,
I working on an add on ,i have registered the ard of that add on . The problem is that when i try to connect ard it gives the error "Menu Not Found".Some time it works fine and it also works fine when i restart the sap.
So kindly Suggest me the proper solution
Thanks
AmitDear Amit,
I faced the same problem in 8.81 PL6.
Dear Gordon,
tou can try run add on, and the add on create sub folder, Log off and login to same company (not close the application), then run the add on again, then you will have the message.
nd.Q -
Constantly keep getting error 404, server not found
Very frequently I keep getting the error message 404, server not found. This problem mainly comes up after I have been on the computer for a while, and I leave the web site that I'm viewing on for some time. I then return to the computer some time later, and when I try to refresh the page to update the info on the page (example: a weather site or yahoo stock market info) I keep getting, 404 server not found. When I try the option: try again, it does nothing to solve the constant problem. The only way I can get back to the web site and see updated info is to start firefox in safe mode. And, that does solve the problem. But why does this problem keep constantly occurring. And, why do I have to constantly have to restart firefox in safe mode to get going again. It would seem firefox should recognize this issue and solve it. I'm using what I believe to be the latest version, 15. Can someone shed some light on this issue? I did not have this problem with my older computer and an old version of firefox, version 3.6. But, since getting a new computer and using a new version of firefox, version 15, this problem constantly appears. Can some one help? Thank you.
Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Codygo through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]] -
Hi,
When i am opening an URL(http://hema-vaio:9704/analytics) in IE i'm getting Error 404 not Found some times and some times i'm getting analytics page.how to resolve this issue.Hi,
Some times it may happen due to obiee 11g installation (simple/software only/enterprise ) due to JVM processor speed only. its still starting the Admin server/bi server still in progress please give some time.
Note: Use JRockit 1.6.0_26 and above version 64bit along with OBIEE11g software only so this will not through like that kind of error. if u goes with simple option with jdk it may slowly starting bi server/admin server thats cause.
if its not working kindly check the status of u r opmn server via command prompt
D:\Oracle\Middleware\instances\instance1\bin\opmctl status
D:\Oracle\Middleware\instances\instance1\bin\opmctl startall
D:\Oracle\Middleware\instances\instance1\bin\opmctl stopall
if any one services down make sure try to login to enterprise manager console and check what all services are down.restart it
for some more ref:
https://kr.forums.oracle.com/forums/thread.jspa?threadID=1126761
Thanks
Deva
Edited by: Devarasu on Mar 13, 2012 4:01 PM -
"server not found" with one ip address but ok with vpn ip
Windows 7 For the last few days I get "server not found" message when I try to access many sites (including Mozzilla help). This happens with ie also.However when I use a different IP (via my VPN) everything is OK.
What is going on?Server Not Found - Troubleshoot connection problems
*https://support.mozilla.org/en-US/kb/server-not-found-connection-problem -
6 unions when not found data I must return zero
Hi
I have a query
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200804 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 144
UNION ALL
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200804 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 275
UNION ALL
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200803 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 325
UNION ALL
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200804 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 278
UNION ALL
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200804 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 276
UNION ALL
SELECT CD_INDICADOR, VL_INDICADOR
FROM T_EC_PESSOA_PERFIL_CICLO PPC
WHERE PPC.NM_CICLO_OPERACIONAL = 200804 AND
PPC.CD_ESTRUTURA_COMERCIAL = 1040 AND
PPC.CD_TIPO_ESTRUTURA_COMERCIAL = 5 AND
PPC.CD_PERFIL = 1 AND
PPC.CD_CONSULTORA = 2133245 AND
PPC.CD_INDICADOR = 326;
CD_INDICADOR VL_INDICADOR
275 13.00
278 12.00
276 0.00
326 0.00Changing only PPC.CD_INDICADOR (144,275,325,278,276,326) and
PPC.NM_CICLO_OPERACIONAL = 200803 when PPC.CD_INDICADOR = 325
When Not found some CD_INDICADOR it must show zero
How can I do it ?Assuming a currently supported version of Oracle one way would be to join with a pipelined table function.
http://www.psoug.org/reference/pipelined.html
Look at the example with the DATE_ARRAY data type.
Maybe you are looking for
-
Itunes wont open without quicktime 7.5
but when i try to get quicktime 7.5 it wont install saying that I already have a more recent version, when i actually i only have quicktime 7.1. what is going on?
-
Connecting my home stereo system to my macbook pro
I want to connect my stereo system to my MacBook Pro in order to put some of my Pops old vinyl onto CD to play when out and about. Please can someone advise best option. Usual stereo phono out from the amp. Thanks Nii Naku
-
Where to find Shutter Count for Nikon Camera?
Is this part of the EXIF data that Aperture displays?
-
Since upgrade iphone 4 Version 7.0.0,I noticed my WIFI is not conecting very good.It stays in 3G.How can I fix?Thanks
-
Can I share photostream with someone who does not use Apple devices?
If I share a photostream with someone who does not use Apple products, will they be able to view the Photostream?