Fieldpoint get info on 'all' channel

Hello
Can somebody, please, tell me how to get info which channels are in the 'all' channel?
I know how to do it in MAX and in project, but, how to get the info in *.vi?
For example, in my item xxx.xxx.xxx.xxx\FP\2AI\All are channels 2,4,7 and 8.
The output array from 'FP Read' has 4 values, corresponding to channel 2,4, and 8.
I need that together with the output array from 'FP Read', I get somehow info which channels are measured?
Thanks

Hello
Now, I am confused by your answer
In the project explorer, I can do the following (see attachments).
Depending on how many channels I choose, the size of the output array from 'FP Read' changes.
Please see the Item 'All', and the item 'bla'.
Also notice that, although they share common channels, they do not give the same values, because of the scaling.
So, I want to know, which channels are in the items (item can be named 'All', or any other name), and if possible get info on the scaling.
Thanks or any help
Attachments:
All_CH0,1,2.jpg ‏1003 KB
bla.jpg ‏1003 KB
get_values.jpg ‏968 KB

Similar Messages

HT6030 Up to now, I have been able to check what is still sitting in my Sympatico mailbox on the server by selecting any email and hitting command-i to get info. All I get In Mavericks is a burp. Is there a way to do this that I don't know about?

Up to now, I have been able to check what is still sitting in my Sympatico mailbox on the server by selecting any email and hitting command-i to get info. All I get In Mavericks is a burp. Is there a way to do this that I don't know about?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

This problem showed up last year spent 2 months with apple senior supervisor for tech support no solution. When the "new" itunes came out problem fixed its self. Just did an update last week or so and back to the problem. In "get info" missing all rt side

Last year upon an update some of my itunes media was not working. Then the new version came out and it fixed itself.
Well another update and we start over with the problem. In the itunes store you can not preview any tv show, music video, or movie.
In your itunes library none of the purchased movies, tv shows, or music videos play. The element the same is in the get info tab. The information in the right side pane in the middle is gone. The left side information is still present. The right side info is the purchase info. Even an item downloaded today had the missing info and will not play. After dealing with apple support with the first go around last year. I uninstalled and reinstalled itunes 8 or more times, in the proper order. I deleted my itunes library and reinstalled it. We deleted all types of program files and program data. nothing worked. I was trying things on my own and foung nothing. Please help I am so frustrated with this. It seems to be a codec error that I can not solve.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Get Info "Change All" button doesn't keep the proper "Open With" app

I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
The problem is:
-With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
Can anyone offer any tips on what might cause this and what fix is needed?
Thanks so much in advance!
Wade

Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
Thanks for the tips but I am still back at square one.
Wade

"Open with" / Get Info / Change All not working

10.4.9 -- I want to open all PHP files with Gvim.
a) Gvim doesn't show in the "Open With" Applications list, I need to browse to find it.
b) When doing this from Get Info with the intent of "Change All" I select the "Open with" to "gvim.app" and select "Change All..." but the "Open With" selection reverts to TextEdit after answering "Continue"
c) This change stuck once, about a week ago, for a few days. But now it's back to TextEdit.
Am wondering where the resource can be found so I can hack this myself, for good.

I picked up "OnyX" and the associated "Maintenance" utilities. "Maintenance" has a tool to reset the LaunchServices database, and that seems to have allowed the association to stick.
http://www.titanium.free.fr
OnyX even has a formatting utility for the UN*X "Man" pages!
Tom_X -- now that's a cool feature, it restores some controls in a handy spot lost long ago... It didn't show php files in the list, so I added it and it shows gvim.app as associated already.

How to get Info about all VPD policies configured?

Hi,
is it possible to get a list of all VPD policies configured in the database?
$VPD_POLICY - displays all the fine-grained security policies and predicates associated with the cursors currently in the library cache.
`- It's empty. This means that this view is populated only if the policy is currently used ..
Thanks.

I have not checked but the dba_* views should be able to give to you this. V$vpd_policy only shows the what's there in the library cache.
Please see this link,
http://download.oracle.com/docs/cd/E11882_01/network.112/e10574/vpd.htm#CIHJGHDE
HTH
Aman....

How can I get info on all purchases i made with my Itune account

How can I check all purchases made with my Itune account

Hi, please try working through [http://malwaretips.com/blogs/remove-ask-toolbar-and-search/ this article], which hopefully will assist you in removing it.
Hope that helps.

Get Url from all tabs

Hello,
I feel like this is something simple but I cannot write a correct script to do it.
How would I write a script that just gets the urls of all tabs in safari?
then if one exists, it selects that tab to be opened.

Would It be easier that instead of telling safari to open that tab if it exists, to set the beginning part of my script that gets info from safari to get info from all tabs, for a specific tab only?
I don't understand your goals to be able to tell you what you want. Given what you've said in earlier posts it sounded like you wanted to see if a particular URL was present in any tab and if so activate it. That doesn't seem to be the case any more. You'll need to more clearly explain what you're trying to do in order to progress.
I purchased a book http://apress.com/book/view/1430223618 which I am going to use to better help me make applescripts as well as cocoa-applescript applications in xcode. Do you think this book will be able to help, or is there another I should look at?
That book, like most others, covers a lot of the theory behind AppleScript - the concepts behind AppleScripts/Apple Events, and things like handlers, process flow, etc.
It will not tell you how to do what you want, because what you want is something very specific - unique, even. What it might do is give you the fundamental building blocks to work out how to build your script to do what you want. For example, I've shown you some examples of how to find out what tabs are present, how to activate a tab, how to switch windows, etc. The book might do the same thing (albeit spread throughout several chapters). It's a matter of putting that together in a way that achieves your goal.

Cannot play or "Get Info" for certain movies - just get spinning wheel???

I have all my DVD's on Apple TV in mv4 format for my daughter (this is not a thread about ripping them!) and everything has been fine. I have 3 AppleTV's I keep her stuff on and it also syncs to an iPod for the car. I'm not sure when it started but I noticed that some of my movies didn't have their artwork anymore. I tried the "get info" but all I get is a spinning wheel. I tried to double click to play and yet again, spinning wheel. The file is there but it crashes my whole system when I try to use it.
So, why one minute would everything be ok and the next some of my files are problematic? Any ideas?
Message was edited by: aubiem

You may be linked to an image (of auto opening font)that went corrupt, is there a comon image between them. If so put that image temporarily in a folder to break the link.
Try making a new user account, or opening on another computer if you can. How do the file size look on the document, are the the size they are supposed to be?
Try resettting your preferences. Cmd-Opt-Ctrl-Shift when restarting AI on a Mac or Alt-Crtl-Shift on a PC to reset to the defaults.
Is the problem definitely associated to them being on the same date, or is the similarity possibly a job with similar fonts/images?

HT2523 textedit won't let me open a saved page; it won't let me save a version of a page; I go to Finder-Get info & all looks ok, but isn't - please help. I can't turn textedit off or else I lose the few pages that I was working on & that went to the doc

Please help me to open my saved TextEdit pages. Help me to "Save a version" of a revised TextEdit page. I'm not able to do either.
This happens every once in a while, and I don't know how to undo it. I go to Finder - Get info, and it looks like I have permission to "read and write", but nothing changes. Thank you very much for your time and help. : )

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

How can I get a list of all channels of a device?

I'm writing a software for use in a couple of our labs to be run as an executable i.e. without LabView being installed on all machines.
Now there's also a couple of different daq hardwares in use. So I planned to have a config tool where the user can choose the appropriate - physical, not virtual - daq devices and channels like: temperature 1 measured by device 1, analog input 2.
Therefore I'd need a list of all available daq devices (which is somewhat possible) together with a list of all channels of a particular device. Is there any way to get this?
Unfortunately I don't want to use virtual channels since I don't want to bother the user with configuring them and btw I don't know if virtual channels work wit
h the pure run-time module of an executable.
Thanks!
Daniel

Hello Daniel,
You can use virtual channels with executables and there is actually a way to transfer the virtual channel configurations to the target computers so your users would never need to mess with configuring virtual channels. Once you have configured virtual channels, you can save the configuration within a .daq file. You can then include that .daq file as a support file of the executable and programmatically set the configuration of the target machine. The linked document below illustrates how to accomplish this.
How Do I Port a DAQ Configuration File With an Executable?
http://digital.ni.com/public.nsf/websearch/CB83B101E19EF83086256A3E0054206C
If you do not want to use virtual channels, the only other thing I can think of is to use the Get_D
AQ_Device_Info VI or function call. You can get a device code when using this VI or call and each code is associated with a specific instrument. You would then have to know (use the device's user manual) to determine how many channels the corresponding device has. Without virtual channels, you would have to use a channel number (0,1,2,...etc) and would not be able to use a string ("temperature 1 measured by device 1").
So, I think using virtual channels and transferring the .daq file to the target machines with the executable will be the best option. I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Get Info--Info Tab--All information is grayed out....can't change anything

In iTunes, right click on a song in the library, click on Get Info, click on Info, All information is grayed out and cannot be accessed and/or changed. Question: How do I correct this situation? I uninstalled and re-installed iTunes to no avail. I am on a PC with Windows 7.

Hi, I'm just brand new to the forum and Itunes and had the same issue with an album I had imported (no track or album info)and likeyrself could not get the Advanced "get track name" as it was greyed out.
After a lot of searching on this forum, with no luck, I changed the VIEW mode from GRID to LIST and then bingo, the option ("get track name") was no longer greyed out!!
Hope this helps. Cheers Dennisg
PS: As a first time user, I'm fast becoming UNHAPPY - I imported a Rod Stuart album and the Bloody Itunes made 4 albums out of the one, because he sang a few duets - HOw silly is that!!

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all.What now?

Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all. What now?

Fallout75, good catch on the eXo plugin. To remove it, in the Finder click "Go" on the menu bar and pull down to "Go to Folder" and then type ~/Library/iTunes/iTunes Plug-ins
When that Finder window opens, you should see an "eXo" subdirectory. Just delete that "eXo" folder and iTunes should start without the error.

Fieldpoint get info on 'all' channel

Similar Messages

Maybe you are looking for