Fields Cannot Display when create SQL Server Data Source

Hi, All
I want to create a data source from a sqlserver source system, but the fields of the sqlserver views could not display in the suggestion screen, and the fields of the data source could not be added either.
How can I do it? Thanks.
Best Regards,
Jiande Ding

Hello Jiande,
Are you loading to BW using the DB connect option? If yes then the problem may be due to an authorization issue,
please follow the steps given in the SAP note 512739 to setup and configure the connection correctly.
Best Regards,
Des

Similar Messages

Create SQL server data source programmatially

Hi,
I'd like to create a SQL server data source programmatically in LabVIEW. The SQL server version I used is 2005. Can anyone give some ideas? A code example will be most favorable.
Thanks,
Jane
Solved!
Go to Solution.

Dan put it well. All you need is a connection string and those are easy to build. There are even a couple website that do nothing but publish template connection strings for every DBMS on the planet.
The only point I would quibble over is about using the database connectivity toolkit. The DCT is an unnecessary complication that is ultimately counter productive because it limits your support options. When I get into the office in a few hours I will post a link to an alternative that actually simplifies the process and is free.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Why do I get timeout when deploying SQL Server data source in Weblogic Admin Console?

Hi all
I'm attempting connectivity between WLS 10.3.6.0 and SQL Server 2008R. I've downloaded sqljdbc4.jar and added to the end of the Weblogic Classpath in commEnv.cmd. Then I set up a data source in Admin Console and pressed the Test Data Source button - success. But when I tick the box to deploy to AdminServer it hangs for ages and I get timeout exception.
Any ideas?
Many thanks
James

Make sure the web server settings between the QA and the Production servers are also compatible.
I suspect your suspecion about permissions is the closest to the answer. But this is a little out of my depth of expertise.
Realize that ColdFusion default behavior is to NOT generate and actual swf FILE. Rather what it does is generate the swf content in memory and directly deliver it to the client. But if the web server is configured to look for an actual file system file you may have a clash going on

BI Trial version & SQL Server Data Source

Hi All,
I want to know Is it possible to create the SQL Server Data SOurce on the BI trial Version 7.0. Kindly let me know if I Want install or configure more. thanks for your support in advance.
Thanks & regards,
Shiva

Hi Shiva:
Please refer to SAP Note 512739 - "BW external DB Connect for MS SQLServer"
In case you need general information of DB Connect for other Databases take a look at the paper below.
"Transferring Data with DB Connect"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40?quicklink=index&overridelayout=true
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 4, 2010 8:30 PM

Error when creating a new Data Source

All, This is on BI Publisher 11g.
When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
what am i doing wrong?
Thank you for reading this post.
Thanks,
R

The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
The JDBC is working ... I can test the connection successfully ... just wont save the entry
Edited by: tread on Oct 17, 2011 11:55 AM

11g with a SQL Server Data Source

I'm using 11.1.1.5 of OBIEE and trying to connect to a SQL Server 2008 data source. I've created the ODBC System DSN using the SQL Server driver. I've created a repository and am able to Import Metadata from the SQL Server database. I had to check "Require Fully Qualified Table Names" in the properties of the connection pool so now I can Update Rows from the tables and also View Data. So at this point it seems like everything is working fine. I created a very basic BM&M and then the Presentation layer.
Now I go into Answers and try to create a new Analysis. I select the Subject Area and see all the columns. I just select one column and click Results and receive the following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 01000 code: 5 message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).. [nQSError: 16001] ODBC error state: 08001 code: 17 message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.. (HY000)
SQL Issued: SELECT 0 s_0, "PDSS UPS"."LOB"."description" s_1 FROM "PDSS UPS"
Here is the SQL sent to the database:
select distinct 0 as c1,
D1.c1 as c2
from
(select distinct T4757."description" as c1
from
(select lob."description",
lob."ID"
from "SIKOMSReporting"."sikoms".LOB) T4757
) D1
order by c2
I've also tried creating a direct database request, but no matter what kind of SQL I put in it does not work via the connection pool.
So everything seems to work from Admin, but not from Analysis.
Does anyone have a clue about this? Is there something special I need to do when dealing with SQL Server?
Thanks for any help you can provide.
Brad

Hi,
I understand this is a microsoft issue. Request you to look at http://support.microsoft.com/kb/888228. As per Microsoft this error might come when any of the following conditions are true..
SQL Server 2005 or SQL Server 2000 is installed on a cluster.
You are connecting to a SQL Server named instance by using TCP/IP sockets.
IPSec policy is enabled on the client domain.
IPSec policy is not enabled on the server domain.
To work around this problem, you have to hardcode the TCP port or the Named Pipe of the SQL Server named instance. To do this, use a connection string that is similar to one of the following:
[oledb]
; Hardcoded TCP OLE DB initstring
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=clientID;Data Source=tcp:TcpIpAddress,port
[oledb]
; Hardcoded Named Pipes OLE DB initstring
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=clientID;Data Source=np:\\ServerName\pipe\MSSQL$InstanceName\sql\query
Hope this helps.
Thank you,
Dhar

No HS to remote SQL Server Data Source using NT Authentication?

I am attemping to use Generic Connectivity to pull SQL Server 2000 data into 10g.
We have the DSN configured, the oracle files modified properly (we have done similar setups before), and are able to successfully tnsping the SQL Server.
However, after creating our database, when trying to execute a query against the remote source I receive the following error message:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver][SQL
Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. (SQL State: 28000;
SQL Code: 18456)
ORA-02063: preceding 2 lines from IDW_LINK
As the message indicates that the error is coming from the SQL Server, I assume a connection is being established.
I remember reading postings here from a couple years back about HS not being able to connect to remote SQL Servers when NT Authentication is required. Is this still the case?
I did in fact provide to the link my "domain\username", "password" combination that has access to the sql server, but this is of course using NT Authentication.
Any ideas on why HS would be sending "NT AUTHORITY\ANONYMOUS" to the sql server? Is this still the already existing problem of no NT Auth for remote data sources?

Have you found a solution for this? Thanks.

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Microsoft Sql Server data source ???

I'm trying to use the Microsoft Sql Server 2000 jdbc driver (without any success) in developing a small jsp app: specifically, I'm trying to set connection in web.xml as follows
<context-param>
<param-name>
javax.servlet.jsp.jstl.sql.dataSource
</param-name>
<param-value>
??? What the heck is the value for Microsoft SQL Server 2000 ???
</param-value>
</context-param>
(basically, this code is swiped from Ch. 12 of Bergsten's book, Java Server Pages - his example uses jdbc-odbc bridge driver).

you need to Specify that the physical table object is a stored procedure. When you select this option, you type the stored procedure in the text box. Requests for this table will call the stored procedure.
For stored procedures that are database specific, select the Use database specific SQL check box. At run time, if a stored procedure has been defined, the stored procedure will be executed.
In the table properties, you need to create columns manually.

Application Server Data Source settings help needed (10.1.2.0.2)

Hi,
Can someone tell me what maximum values can I set in the following properties under Connection Attributes when I define a DataSource on
Application Server. I have almost 25+ web application deployed on my 10.1.2.0.2 server that all uses one data source I have defined. Now the issue is the number of requests
are very high and every now and then I get timeout error when trying to get the database connection. At one particular instance at peak time I may get over 200+ requests that
do some databse connections etc. Following are my current settings. But need to increase some more but wondering what are the maximum values I can have. I have only one server 10.1.2.0.2
Connection Retry Interval (seconds) = 5
Max Connection Attempts = 3
Cached Connection Inactivity Timeout (seconds) = 30
Maximum Open Connections = 60
Minimum Open Connections = 10
Wait For Free Connection Timeout (seconds) = 15
What other properties can I have to make use of datasource effectively.
Thanks

Here is the copy of my datasources.xml.
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources-9_04.dtd">
<data-sources>

<data-source class="com.evermind.sql.DriverManagerDataSource" name="OracleDS"
               location="jdbc/OracleCoreDS" xa-location="jdbc/xa/OracleXADS"
               ejb-location="jdbc/OracleDS"
               connection-driver="oracle.jdbc.driver.OracleDriver"
               username="scott" password="tiger"
               url="jdbc:oracle:thin:@//localhost:1521/oracle.regress.rdbms.dev.us.oracle.com"
               inactivity-timeout="30"/>

<data-source location="jdbc/TestDS"
               class="com.microsoft.jdbcx.sqlserver.SQLServerDataSource"
               password="pwd" xa-location="jdbc/TestDS"
               ejb-location="jdbc/TestDS"
               connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
               username="usr"
               url="jdbc:microsoft:sqlserver://someloc99:1433/DevelopmentAp"
               inactivity-timeout="30" name="jdbc/TestDS"
               connection-retry-interval="5" max-connections="50"
               max-connect-attempts="3">
    <description>jdbc/TestDS</description>
    <property name="DatabaseName" value="DevelopmentAp"/>
    <property name="serverName" value="someloc99"/>
</data-source>
</data-sources>I also tried changing max-connections="0" it did helped but still after sometime I get timeout while connecting to the database. Don't know if it's with SQL Server that is not letting that many concurrent connections/sessions or something on the Application Server side.
Thanks
Message was edited by:
WhiteSox
Message was edited by:
WhiteSox

SSDT - SQL Server Data Tools - display issue

In SSDT 2010 SSAS project, Dimension Usage --> Define Relationship window
The display has problem to see everything. In the "Define Relationship" windows, the Relationship section overlap the measure group table display. I can only see upper half the measure group table font.
Can someone help to let me know what is the issue?

Hi Tie,
According to your description, there are some display problems when you design a SQL Server Analysis Services project in SQL Server Data Tools, right?
In your scenario, does this issue occur on only this project or all the projects? In your scenario, please create a sample SSAS project and then check if this issue occurs on the new project or not?
If this issue occurs on only this project, then the issue is related to your cube structure, please to restart SSDT to check if this issue persists or not. If the issue persists, please provide us more information about your cube settings.
If this issue occurs on all the projects, then the issue is related to SSDT. To avoid this issue, you can use SQL Server Data Tools – Business Intelligence for Visual Studio 2012 to build you SSAS project. It available on the link below
http://www.microsoft.com/en-in/download/details.aspx?id=36843
http://blogs.msdn.com/b/analysisservices/archive/2013/03/06/sql-server-data-tools-business-intelligence-for-visual-studio-2012-released-online.aspx
Regards,
Charlie Liao
TechNet Community Support

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

System Center 2012 R2 install: SQL server Data file and log file

This might be a dumb question, but I can't find the answer anywhere.
I'm installing a new instance of System Center 2012 R2 on a new server, I'm stuck on the SQL Server data file section. Everytime I put in a path, it says that tne path does not exist. I'm I supposed to be creating some sort of SQL Server
data file and log file before this installation, I didn't get this prompt when installing System Center 2012 SP1 or hen I upgraded from System Center 2012 SP1 to System Center 2012 R2
My SQL is on a different server
Thank you in advanced

Have you reviewed the setup.log?
On a side note, why would you put the database file on the same drive as the OS? That defeats the whole purpose of having a remote SQL Server. Why use a remote SQL Server in the first place.
Jason | http://blog.configmgrftw.com

Association rule in SQL Server Data Mining

I have been working on a problem on association rules in SQL Server Data Tools (Visual Studio 2008) for quite a while but have not yet been able to figure out the solution.
The problem is: I have a table named Sales_history in my SQL database. This table has following columns: CustomerID, ItemID, Month (from May2012 to April 2013), QtyShipped. I am looking to find association between Items and i want to provide recommendation
to the Customer (In this case CustomerID) based on their purchases.
Note: there are around 630 customers and about 34000 products in my table.
My approach:
I marked History_Table as both Key and nested. And in the Key, i checked CustomerID as input and Key whereas in nested, i checked ItemId as Key, input and Predict.
When i run the model, i get a solution but i am not sure if i am configuring it right. Also i am not sure how i can write prediction join query to generate Item recommendations . I am really struggling with
this problem, eagerly waiting for the reply. Thank you.

Hi Tatyana,
Thank you so much for your reply. I have now been able to create the data mining model using association rule and by writing a DMX query, i am able to generate the item recommendations to be given to customers for items they have purchased. However, i have
noticed one thing that in the DMX query, it gives the same item recommendation for any item i put inside the query.
Also, if i put any item in the DMX query from the generated list of recommended items, the output of that query also shows the item that is inputted inside the query.
Here is the query, that i am writing to generate item recommendations
SELECT predictassociation (CrossSellingModelV3.[Ztb Customer Item v3],INCLUDE_STATISTICS,5)
FROM CrossSellingModelV3
NATURAL PREDICTION JOIN
(SELECT
(SELECT '17IS56126' as m )
AS Ms)
AS t
What can be the possible reason behind this? Is this something related to the kind of data i have? In my data, there are 632 distinct customers and 34000 distinct products.
If i execute this query in management studio.
select customer_CD, COUNT(Item_CD) from ztb_Sales_History
group by customer_CD
order by 2 desc
the output shows that there are some customers who have bought just 1 item and also there are customers who have bought 2400 items. i mean the range is very high.

SQL Server Data Tools for SQL 2014 setup

Hello,
I have been using SQL server 2008 with Visual Studio 2008 to perform the ETL processes.
I have recently got SQL 2014 and realized that Business Intelligence Development Studio does not come with it so I have to download SQL Server Data Tools for Visual Basics 2012 or 2013 from:
https://msdn.microsoft.com/en-us/data/hh297027
Can someone advise what exactly I have to do if I want to start using SQL 2014 with SSDT? I still have VB 2008 installed and all my packages were created with that version.
Do I need to download VB 2012 or 2013 plus SSDT and then SSDT? Do I also uninstall VB2008?
Thanks in advnce

Hello,
If you want to keep developing packages for SQL Server 2008 then you need to use BIDS 2008, you cannot use SSDT.
If you want to upgrade BIDS projects to SSDT, then you can use Integration Services Project Conversion Wizard from Visual
Studio or SSIS Package Upgrade Wizard from SQL Server Management Studio (SSMS).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Fields Cannot Display when create SQL Server Data Source

Similar Messages

Maybe you are looking for