Fields in BW and R/3

Hi All,
I was trying to know all the related fields for a cube and few ODS's in BW and R/3 so that I can match them for documentation purposes. I wanted to know what is the tcode, I will need to use to get to the screen in R/3. Any help is appreciated and will assign points.

U can check all the infoobjects corresponding to R/3 fields in below tables:
RSTSFIELD
RSOSFIELDMAP
Best way to check mapping is using BI Contents.
KJ!!!

Similar Messages

Fields in infocube and DSO?

Hi Experts,
                 I need some information regarding maximum number of fields in infocube and DSO?
     According to my knowledge, in Infocube - characteristics --248
                                                                         Keyfigures--233
                                                In DSO - key fields - 16
                                                              Data fields -749
             I thought dat DSO has 3 tables. maximum number of columns in a table is 255. So 255 * 3( 3tables in DSO) is 755.
                                             755(total fields)-16(key fields)= 749(data fields).
Is it correct?can anyone clarify my doubt pls?
Thanks in Advance
Jani Sk.

Hi,
       In cube , table consists of 255 columns, in which 6 are internally used by SAP,16 for dimensions and the remaining 233 are for Key figures. Each dimension key connected to 248 master data tables at max through dimension and SID tables.So, We can analyse the data at 16*248 dimensions.
ODS/DSO is a two dimensional flat structure.It consists of total 1024 columns, out of which 16 are used for Key fields and remaining 1000 are for data fields.
Thanks,
Sandeep

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Hi All, I just installed PS CC 2014 and Deleted PS CS6. I have a HUGE problem! The Liquify Filter on PS CC 2014 is not working. When the filter comes up, my photo is reduced to two color fields - bright turquoise and lime green! Can anyone help me? I

Hi Everyone,
I just deleted PS CS6 and installed PS CC 2014. I'm trying to use the Liquify Filter and it does not work. When I click on the Liquify Filter, my photo does not appear properly. The photo appears as two flourescent color fields - bright turquoise and lime green! Can anyone help me with this? Also, does anyone know if I can re-install Photoshop CS6?
Thanks!
Laraine

Hi Everyone....I figured it out. Strangely, although I had NEVER used Liquify in PS CC 2014....I just realized that in Liquify Advanced Mode that the "SHOW MASK" option was on by default! I unchecked SHOW MASK. Everything is OK. Whew! Tks!

Default value in LOV field in Create and Update page in OAF

Hi All,
I am unable to default LOV field in Create and Update page in OAF.
I tried in below way :
OAMessageLovInputBean lovBean1 = (OAMessageLovInputBean)webBean.findChildRecursive("AAA");
But I am getting developer mode exception, so please guide me how i can set the default value for create and update page instead of using code in process request method in controller.
Thanks

Hi,
1) In case of create, you can default the value either in EOImpl or in AM while initializing the row:
//in EOImpl
public void create(AttributeList attributeList)
super.create(attributeList);
setXXAttribute(<value>);
//in AM, VO new row initialization :-
VOImpl VO = getVO1();
VO.setMaxFetchSize(0);
VORowImpl row = (VORowImpl)VO.createRow();
row.setXXAttribute(<value>);
VO.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
2) In case of update, execute the VO (also set the where clause if required) in PR method of update page.
--Sushant

New flex field in "Gender and Marital Status"

Hi Experts,
Please Let me Know whether we would be able to add New Flex Field in "Gender and Marital Status" in Manage Person Page,.
Thanks&Regards
Prasanna Kesavan

It sounds like you are trying to add a new value of "Significant Other" to the Marital Status drop down. If that is what you are trying to do, the list is controlled through the MAR_STATUS lookup. That Lookup is extensible so you can add new values if you like.
To update the Lookup, navigate to Setup and Maintenance and query the Manage Common Lookups task.
Then query the Lookup Type = MAR_STATUS
From there you will be able to see all of the values available for different countries.
If the options are greyed out, then you will not be able to alter them because they are delivered with the product.
However, you have the option to add new values of your own here.
If you only want to see the value for particular countries, you can add a value in the "Tag" column with the Country Code where the value should be visible (i.e. if the code is only applicable in the US then you would add "+US" in the tags, if the code is applicable everywhere except the US then you could add the tag "-US").
Hope that is helpful,
Karla

Adding new field in PO and PR screen

Dear Friends,
Kindly sugest the solution to add new custom field to PR and PO screen at item level in SOURCE OF SUPPLY TAB.
regards
Vishal

Hi,
Check the exit MEREQ001 for PR & MM06E005 for PO.
Hope the above helps.
Regards,
Vivek

Custom field in 'Notes and Attachment" tab of shopping cart

Hi All,
I am working in SRM 7.0 classic scenario and i have requirement in which i need to add custom field in 'Notes and Attachment" tab of the shopping cart portal.
I have added those fields in structure --- INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
Also implemented the BBP_DOC_CHANGE_BADI in while i am populating the custom field value.
I have created custom field as INPUT FIELD in webdynpro component /SAPSRM/WDC_DODC_NA and view : V_DODC_MAIN_VIEW.
Now I can see the custom field value in table BBP_PDISC, but i am not getting the value in Shopping cart "Notes and Attachments" tab.( I am able to see the field but not the value of it).
The value is getting populated in ITEM DATA tab instead.
Please suggest if i am missing anything in the process and how to achieve this.
Thank you in advance.
Thanks,
Satheesh

Hi,
You have done everything.. well.. except that you did not set the attribute of the input field to this value.
When you have value u just need to bind it using set_attribute method of the element.
Use ctr+f7 to generate the wizard .. select in set mode.. click on context and select the attribute that you have created in the context.
Hope this helps.
Regards,
Vinay

Name of the table where can get the two fields Valid-From and Valid-to for

Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
Kaisar

You can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
Arun

Hi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun

Cannot see form fields on EBay and Ad trader sites

cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies.
i have to use Internet Explorer to see them. does anyone have the solution to my problem? i hate explorer so much and Firefox is so quick i use it as my main browser.
== URL of affected sites ==
http://http://www.adtrader.co.uk/

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How to add one more field in infotype and PA 30 screen

Hi to all
My requirement is to add a new field in infotype and that should be reflected in PA30 screen.
Actually in my company one field require from which date the car allowance is started.
For that one date field is require on PA30 screen ..
Also suggest me which screen is suggestable for that. and also give me any othe way is possible.
Thanks & Regards
Anubhav

Yes .. I added the field in the structure but that field is not reflecting in PA30 screen.
please advice me .. what to do...
Thanks..
Anubhav

Regarding mandatory fields, Context Objects and Fault Message Types

Hi All,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
2) What is the purpose of Context Object and in which situation we will use this.
3) What is the purpose of Fault Message Types and in which situation we will use this.
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
Kindly look into the above points and respond point by point.
Thanks in advance.
Regards,
Prem.S

Hi prem,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
give occurence 1..unbounded. for the field name.
2) What is the purpose of Context Object and in which situation we will use this.
If u have multiple receiver system then to determine the reciever u can use context object.....
the alternative of context objetc is X-Path...
Check out these
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Here is a scenario where context objects were used for BPM
Technical Context Object in ccBPM
Get the details here:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
Technical Context Objects :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
A list of the Technical Context Objects names can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
Difference between context object and x-path:
diff between context object and x path
3) What is the purpose of Fault Message Types and in which situation we will use this
whenever u want to catch some exception u can use fault message types.Just for a example u r sending some data to SAP system.But due to some reason the R/3 system is down.so in this case if u have implemented fault message ..u can get a error message specifying r/3 is down....
Fault message implementation.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
How to Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
there are two transport protocol for File adapter
1)FTP(File transfer protocol)
to know abt FTP check here
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/content.htm
2)NFS(Network File System)
in server :Enter the host name or IP address of the FTP server.
in PORT:Specify the port number of the FTP server.
The default is the standard port for the FTP server (21)
check here
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
BILL
***reward with points if ity helps u!!

Problem In Enhacing field EKPO - BRTWR and EKPO-MWSKZ

Hello SAP Experts ,
I want to enhace two fields ekpo-brtwr and ekpo-mwskz for Purchasing data source 2lis_02_itm .BUt Datasource dosnt contain field value not even as hidden filed.
I tried to direct entry by structure maintain for that two fields but its not allowing me ...
give any solution to Enhace these fields .

Hi
It will not allow to enter this fields directly
Do following steps
double click the data source in Rsa6
double click the extractstructure name
this will open Extractstructure in Data Dictionary
Click on append structure button
Give a name to append structure
This will create a new struture
Enter the New fields u want to Append
like ZZBRTWR give reference of ZZWAERS in currency/quantity fields tab
ZZWAERS
ZZMWSKZ
Now you need to Code in exit to populate fields using CMOD or BADI
Hope this helps.. ask if you have further query
Sonal...

Requirment to add new field in kna1 and maintiane using XD02

hi
i have a requirment need suggestion on that
1) the requirmen is to add a new field email id on kna1 standard table
( it can be done by append structure pls give me full steps to do it and complication involved in it)
2) now is it possible that user able to maintiane this new field by using Tcode XD02
will it be visible there if we use a new zappend structure and how the data will be populate in that field by Xd02 do any change required in Xd02
3) we have to create another tcode for display of these threee fields kunnr name1 and email id that will be done by moudle pool again so is there any compication in thati method later is above steps are done
main th ing is how data will be populated in kna1 using xd02
regards
ARora

hi Seshu
my main problem in this is that
since we are using append structure how data wil be populated in the kna1 table in this new field email id?
as we need to find some user exists to do so as it is a structre not a field so population of data is a problem in that?
2) and wheter i should new ztable but customer is asking to add in the standard table and maintian by some xtransaction whetehr it is possible or not?
#) also can us suggeest on the primary keys i should give for t his data types and records as pasted below if i create a new table and should i check init check box also?
kunnr        email id                                       name1
100400     [email protected]      TECHNOLOGY HONG KONG LTD
100400     [email protected]      TECHNOLOGY HONG KONG LTD
100400     [email protected]     TECHNOLOGY HONG KONG LTD
100400     [email protected]               TECHNOLOGY HONG KONG LTD
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]                      INDUSTRIAL CO. LTD.
100550     [email protected]                      INDUSTRIAL CO. LTD.
100550     [email protected]      INDUSTRIAL CO. LTD.
100550     [email protected]                       INDUSTRIAL CO. LTD.
regards
Arora

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Fields in BW and R/3

Similar Messages

Maybe you are looking for