Fields in MIGO - BATCH and Valuation Type

Hi all,
I would like to know the meaning of the following fields in MIGO.
BATCH - Charg
Valuation Type - Bwtar
Which is the impact of each field?
Should they have the same value in TRA MIGO?
Which means that only the BATCH field is entered and the Valuation Type empty?
Thanks you very much!!

valuation type  comes into the game If a material is subject to split valuation.
you can for example split the valuation based on origin, e.g. internal produced and external procured.
this is more a financial thing.
the batch is the level to segragate the stock of a material. e.g. each GR can be a new batch. so you can manage the stock by FIFO rules and by shelf life.  this is a logistics thing.
Both can be used on their own, or together.
if you want manage your materials by batches, but dont need split valuation, then you only have to take care about batch number, and the valuation type field in the batch record stays empty.
if you manage material by batch and you use split valuation, then the split valuation type is a mandatory field in the batch record and you may have to enter batch and valuation type, but usually the valution type is defaulted from customizing.
The tricky part is if you only use split valuation, because then the valuation type becomes the batch number. this is sometimes a bit confusing.

Similar Messages

  • Defaulting batch and valuation type for a specific division for tcode me21n

    Hi
    I would like to default the valuation type and batch for a specific division while creating the PO.
    Kindly let me know if there is any user exit for this.
    Thanks & Regards
    Bhagya

    Hi .
    Actually my requirement is while you are creating PO, the value say 'ABC' must be defaulted both in Batch and valuation type  but when change that to 'DEF' it should allow you.. means you should be able to modify the batch and valuation type fields. I can be kept empty also.
    I tried using field exit to default Batch and valuation type, but it does not work if the batch is empty.
    If I use the BADI you mentioned what are import and export parameters and how do I code to meet my requirement.
    Kindly let me know.
    I will definitely reward points if it works.
    Thanks in advance
    Bhagya

  • BATCH and VALUATION TYPE

    Dear All,
    Can anyone, please explain me clearly the difference between BATCH and VALUATION TYPE in MIGO and PO screen?
    What is the link between them ? pls explain in detail....
    Edited by: Raju on Nov 17, 2008 8:02 AM

    Hi,
    There's a link between both which is the indicator "Valuation type is set automatically". It can be set at the global or local (plant) valuation category.
    When you set this indicator, it means that each batch itself represents a valuation type (individual batch valuation). In other words, a valuation record is created automatically for each batch at Goods Receipt.
    -Edited-
    Example scenario:
    I activated batch management at plant level for material A and also activated split valuation. For this material, I produced the first batch (100pieces per batch) with certain characteristics. This batch is valuated at $100 per piece. I do a Goods Receipt against Production Order.
    Then my next production batch has better characteristics, so I wanted to valuate a piece slightly higher. With the indicator "Valuation type is set automatically", I can set a different price for this second batch during Goods Receipt from production (because a different valuation type is created for this).
    So I make use of batch management to manage my different sets of 100 pieces due to the slight different characteristics during each production run. I also make use of split valuation and the above indicator to valuate each batch separately.
    Hope this helps.
    Thanks
    Edited by: Han Lun Chan on Nov 17, 2008 9:59 AM

  • WM: Batch and valuation Type

    Hi,
    Is it possible to maintain a material having batch number as wel as valuation type in warehouse.
    Can you guide us for relevant SAP documentation.
    Thanks in Advance
    Prashant

    You can have a material master with split valuation and batch management.
    In this case the valuation type is only a field in the batch master record.
    In WM stock oveviews and other document you will only see the batch number, not the valuation type.

  • MB52 batch and valuation type

    Dear All,
    I have a material for which valuation type and batch management is active. After goods receipt, when i check MB52, i can only see the batch number but no valuation type.  So is there any other report that i can see the stock for both valuation type and batch ?
    Thanks in advance..
    Best regards,

    there is no such report, you need to create a customized MB52 report
    Only if you would not have batch managment activated, then you could directly see the valuation type in MB52.
    Anyhow, have a look into MB5L report, it has the valuation  type, but may have other issues, if you execute it just for one material

  • Batch vs Valuation Type

    Hi all,
            Can anybody please explain me clear difference between BATCH and VALUATION TYPE in PO? What is the link between them ?
    And
    what is this Package number in ESLL(Lines of Service Package) table ??
    Helpful answers will be certainly rewarded
    Thanks & Regards,
    V.Raghavendra
    Technical Consultant

    as batch is the smallest unit to segregate one material for various reasons, such as quality grade of a production. it can have its own shelf life.
    valuation type is a subdivision of a valuation of a material. 
    this can be by quality:
    High quality
    Average quality
    Inferior quality
    or by origin:
    domestic
    foreign
    internal vendor
    external vendor
    If a material is split valuated but not batch management, then SAP shows the valuation type in the batch number field in the stock overview (that is what is driving many people crazy) SAP even creates a batch record for this valuation type in back ground (can then be seen in tables MCHA/MCH1)
    If your material is batch managed and split valuated, then the valuation type is stored within the  batch record  in an extra field.

  • Is there any table for relation between batch number and valuation type ?

    hi,
    I would like to know where i can find relation between batch number and valuation type ?
    thank you and Best regards
    Fernand

    Hello
    MCHA

  • "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same"

    Hi MM guru,
    Please help me with the error message - "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same" encountered during MB1b transaction.
    Thanks in advance,
    Iram

    Hello Amuthan,
    I'm using mov type 311 and the material is not batch managed. I've entered the supplying & receiving batch and then error "Batch NO SALEAB. and valuation type 1ST CHOICE are not the same" was encountered, I found out that in table MCHA that the batch & valuation type for this material is not the same thats why its showing the error. Can you please guide me on how to maintain the data in table MCHA? What configuration we need to set?
    Thanks in advance,
    Iram

  • Stock on posting date with storagelocation,batch and stock types informatio

    Hi,
    I'm needing a report (similar funtion of MB5B) which must reveal the stock postion (closing balance) of the materials on a particular date alongwith storage loactions, batches and stocktypes (Unres/Q/Blkd).As such MB5B either gives the output either by storage location or by batch, not the combination of both.
    Else provide any possibilty means( Database tables) from where i could arrive these mention outputs.
    I could be able to get the information by collecting the values from MKPF & MSEG tables. But this information only suffice the material movements carried on that particular date.. And i will be not having the closing balance as a whole.
    I even wonder to get any such a kind of information in which i could able to get the stock with stock types(Unres/Q/Blkd).
    Any light on this matter is highly appreciable.
    Regards
    Prasanna

    Hi Amit Bakshi,
    Thanks for the reply..
    I executed the suggested program but i found the same kind of information aslike in MB5B..
    The information all i'm looking is to get the closing balance of the given material with storagelocations, batches and stock types on a given posting date.
    For eg.
    On 15 / 03 / 2011
    Material A
    Batch       Slocation       Stock type               Closing balance Qty.
    A1              S001               Unres.                             50
    A1              S002               Unres                            120
    B1              S001               Quality                             15
    C1              S003               Blocked                            30
    In MB5B i could able to get the values of closing balance either Storage location level or by batch level but is it possible to get the combination of both along with stock types?
    Reg
    Prasanna

  • Material master table for finding out valuation category and valuation type

    Hi,
    I have a material XYZ for which a valuation category 'H' is assigned. Now I need to create a valuation type for that.
    Question - I want to find out for the same plant & st location which are the other materials with valuation category H, and what are the valuation types used.
    I checked in mara, mard, mbew etc but of no use.
    Which table can i get the data ?

    hi,
    As the valuation details are saved and are based on the material, you can see the details of valuation type in MBEW table...and field as BWTAR
    For valuation catagory, you can see the table MARC...field as BWTTY...
    If want the valuation type details for both plant and storage location, you shd check the GR table ie. MSEG where you will get the valuation type ....
    hope its enough to retrieve the data..
    Regards
    Priyanka.P

  • Report to show open orders and valuation type

    Hi,
    Is there a report in SAP that shows the open orders and the valuation type of the materials in those orders?
    thanks

    Hi jay,
    What is the definition of Open orders according to your company?
    Is it Sales orders created but not delivered?  or
    Is it Delivery created for the Sales order but not done PGI?  or
    Is it Sales orders but not billed?
    Accordingly you must decide.  Just VA05 will give list of orders where you can take from the Status updation whether it is delivered or not.  But apart from that, if you need any report relating to Open orders, you need to develop a Z report which will help your company.  Just ask your business user how he wants.  Based on that you can decide.
    Thanks and regards.
    Augustine Ponraj

  • EBP_GET_BACKEND_PRICES and Valuation Type

    Hi
    Is there a way to run report EBP_GET_BACKEND_PRICES for Materials where Valuation Type = 'NEW' instead of all?
    Thanks,
    Nikhil

    Hi All
    We developed a custom program for EBP_GET_BACKEND_PRICES to satisfy our requirements.
    Follow Up Question I have is how do you all scheduled the EBP_GET_BACKEND_PRICES in your system.
    The original and custom program take a long time to finish due to the number of items in our system.
    Any strategy or suggestion to schedule the program to improve performance?
    We are using SRM 5.0 SP13.
    Thanks,
    Nikhil
    Edited by: Nikhil on Jun 12, 2009 3:24 PM
    Edited by: Nikhil on Jun 12, 2009 3:26 PM

  • Select data from a table and a view: field with same content and different type

    hi all,
    I need data from a table hrp1001 and a view V_USR_NAME. What they have in common are the content of the fields SOBID and BNAME .
    It will be easier if those fields add a same type but they dont.
    Any suggestions for a workaround?
    Thanks

    Hi Ramesh,
    Specify the date format as YYYYMMDD in where condition.
    Dates are internally stored in SAP as YYYYMMDD only.
    Change your date format in WHERE condition as follows.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and bdatu = <b>'99991231'.</b>
    I doubt check your data base table EQUK on this date for the existince of data.
    Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and <b> bdatu <= '99991231'.</b>
    Thanks,
    Vinay
    Thanks,
    Vinay

  • Tables for batch and movement type

    Hi all!
      We have to show the batch data after GR is done with respect to different movement types. I got a table CHVW which gives the data for batch , movement type ,material and quantity.But data for 302 and 541 movement types is not updating in this table.Is there any other table for these two movements?Please suggest.

    Hi,
    pls use below table's
    MSEG - Detail Material Document
    MKPF - Header: Material Document
    Regards,
    Sankaran

  • Error to select data field of same length and same type.

    Hi,
    I have to select data from VBRK , VBRP and then from table CE4UCA1_ACCT based on the condition
    AKTBO   IN SO_AKTBO           AND
    PAOBJNR = LT_VBRK_VBRP-POSNR  AND
    PASUBNR IN SO_RKBNR           AND
    PRCTR   IN SO_PRCTR.
    So while coding it gave a syntax error saying that PAOBJNR & POSNR need to be of same length. To solve this I chagned the decalaration of POSNR from "POSNR TYPE POSNR" to "POSNR TYPE RKEOBJNR" and this corrected the error.
    Now I have to select data from KONV table based of the condition :-
    Get data from KONV table.
      select knumv
             kposn
             stunr
             kwert
         into table lt_konv
         from konv
         for all entries in LT_VBRK_VBRP
         where knumv = LT_VBRK_VBRP-knumv and
               kposn = LT_VBRK_VBRP-posnr and
               stunr = '950'.
    Here again it is throwing syntax error that LT_VBRK_VBRP-posnr should be of same type and same length. So please guide me how to solve this type of situation.
    Thank You,
    SB.

    Hi,
    select knumv
    kposn
    stunr
    kwert
    into table lt_konv
    from konv
    for all entries in LT_VBRK_VBRP
    where knumv = LT_VBRK_VBRP-knumv and
    ***--- Change to
    *kposn = LT_VBRK_VBRP-kopos and*
    stunr = '950'. For 4.6c system
    OR
    Pass VBAK-KNUMV to KONV-KNUMV
    VBAP-POSNR to KONV-KPOSN
    Edited by: Raj on Jun 17, 2008 2:27 AM

Maybe you are looking for

  • I can't create an email address.

    I can't create an email account on my Blackberry Curve 3G 9300, because it first asks for my user name and password, and when I enter them it says it's invalid. I've checked, double-checked, and triple-checked to make sure I'm entering them correctly

  • BW solution for ABAP Reports

    Hi All, I have a client which implemented SAP R/3 and they have certain standard reports like MB5B, VA05 and certain zreports. Now my task is to propose a BW solution for that client. What will be the steps that needs to be done to accomplish this ta

  • How to attach a document from cloudOn to my online application form or website

    How to attach a document from cloudOn to an online application form or website?

  • Which is better group by or for all entries in

    We have more than 11 Lac Records in AUFM table. I am working on a Report to find SO to Production Order to AUFM (for raw material). It's ALV OOP. Which code will give better result - For AUFM fetch with key AUFNR. GROUP BY matnr OR FOR ALL ENTRIES IN

  • Calling Tuxedo Service using BEA Jolt.

    I'm trying to call Tuxedo service from java stored procedure using BEA JOLT.My normal java client works fine but when i use the same client as java stored procedure i get following error message : can not connect to any //lucy:9021(host:port) Reason: