Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG  -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Similar Messages

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • How to provide a LINK on normal TEXT field in read only mode

    Hi,
    I have a TEXT item and that is used for only url purpose.
    so a user can enter something like http://www.abc.com in that field.
    So when I am in read only mode for that item, I want a link also on that text..
    how can I do that.
    thanks,
    Deepak

    You could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
    '<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
    varad

  • How to change report region fields in read only mode?

    How to change report region fields in read only mode?
    skud.

    add the following javascript fuction to page header(or Javascript function and variables section)
    function disableItems(pRegionStaticId,pDisableFlag) {
      $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
        if( $(this).attr('name').match(/f[0-9][0-9]/) ){
          return $(this);
      }).attr('disabled',pDisableFlag);
    pRegionStaticId is the region's static Id+
    Note that this code specifically disables only application arrays. Disabled items are not available after submission (and hence are different from readonly) . But any page javascript can modify disabled or readonly items(client side), so you must check at the server side to validate the data.
    You can disable items using
    disableItems('MY_REGION_ID' ,true);and enable them by passing false
    disableItems('MY_REGION_ID' ,false);

  • Querying up AR Customer OA page in read-only mode for a Single Customer

    We are building a Custom Form in which associated Customer <defined in AR> would be queried up.
    Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru which he would see the Full Customer Details. <AR Customer OA page>
    We have two requirements
    1> The Full Customer Details should show up in Standard OA Customer Page the moment page comes up. The user should not be required to query the details.
    2> It should be read-only and user should not be able to update any field.
    How can we achieve this requirement? I did some RnD but did not see any place in EBS where we display the Customer Page in read-only mode and that too quried up for one particular customer.
    Thanks
    Arun

    Hi Arun,
    Please let me know if find any solution for this. We have a similar scenario in which we need to call the customer Page with all the inforamtion populated, related to one customer.
    Thanks in advance,
    Mannuru

  • Remove Standby/Read only mode for a database in sql server 2005

    Hi,
          I have a problem in sql sever . my database is showing standby/read-only mode. i want to remove that mode.please help me for the issue.

    HI
    Did you assign any DB read only user?
    check the administrator guide in your SAP Business one->Documntation->system setup->Administrator guide...
    but removing DB read only user is impossible.....

  • Read-Only mode for a Essbase DB

    Is the a way to put my Essbase Db with Historical values in read-only?, I found that the Maxl Archieve option will do but I don't know if this is only for backup.
    Regards,
    Antonio

    If you want to put the entire database into read-only mode, SoL (love that name) gave you the right direction.
    If you only want to put part of the database into read-only mode, e.g., 2007 through 2009 data, you can use READ filters to do this.
    Have a read here on the theory: http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dsefilt.htm
    Have a look here on how to do it: http://download.oracle.com/docs/cd/E12825_01/epm.111/eashelp/crtfilt.htm
    Regards,
    Cameron Lackpour

  • How to display the "display values" in READ Only mode for a SHUTTLE

    Hi,
    I have a form item of type *'Shuttle'* and using the following LOV.
       select DEPTNAME d, DEPTNO r
        from  DEPTIn normal mode..it displays the department name and internally store the Deptno..
    Now I converted this item to Read Only mode using Read Only Condition Type
    the problem is as soon as it becomes read only...it displays the deptno....not the department name
                Department-   10:20:30How can I display the "display values" i.e the actual department name in read only mode..
                Department-   Department1:Department2:Department3Thanks,
    Deepak

    Hi,
    It seems feature. Shuttle is span tag when it is read only.
    Work around could be that
    you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
    Br, JAri

  • New for ABAP in functional upgrade from 4.6c to ECC6.0

    i want to know the enhancements, additions and changes in the technical side/ABAP , when moved from 4.6c to ECC6.0 in case of FUNCTIONAL UPGRADE only....
    our compny has done FUNCTIONAL UPGRADE so far..whats new for technical ppl like us apart from changing bdcs, some missing functions, etc...
    thanx,
    Naveen Vishal

    Hi
    Technical upgrade is the fast upgrade without additional functionality but with minor user interface changes to ensure business continuity.  In the past, all objects modified by a customer had to be manually re-modified during an upgrade. Now, modifications are either automatically adopted or the system provides you with an assistant for adjusting your modifications to the newly upgraded configuration using transactin SPAU and SPDD.
    SPDD:  This transaction allows you to adjust modifications to ABAP Dictionary objects during an upgarde.
    Using this transaction we can adjust the Domains, Data Elements, Tables, Strcutures, Transparent tables, pooled and cluster tables including their technical settings, indexs of transparent tables. If you adjust data elements that have been changed with the Modification Assistant in an earlier release, the changes can be copied automatically.
    Steps to run SPDD: 
           1.      1)  Start transaction SE03 as user DDIC and choose Administration ® Set system change option
           2.      2)  Select Modifiable in the Global setting dialog box.
           3.      3) Choose Continue.
           4.      4) Choose Edit ® Select all.
           5.      5) Save your changes.
           6.      Then log on as a normal user, since user DDIC may not perform any repairs.
    SPAU:  This transaction allows you to adjust programs, function modules, screens, interfaces, documentation and text elements after an upgrade.
    After you adjusted or edited an object, you can use User/Status function to modify the status of the object. Before doing this, you can also add other developers or testers that are allowed to edit the object and create a short note.
    Steps to run SPAU:
    1) Start transaction SE03 as user DDIC and choose Tools ® Administration ® Set system change option.
           2.      2)  Select Modifiablein the Global setting dialog box.
           3.      3) Choose Continue.
           4.      4) Choose Edit ® Select all.
           5.      5) Save your entries.
           6.      Then log on as a normal user, since user DDIC may not perform any repairs.
    Other important topics in Technical Upgrade:
    Updaring the Development System: Perform the adjust int he development system using SPDD and SPAU transctions and assign to transport requests.  The upgrade control program R3up exports the transport that you have marked in a later upgrade phase.
    Upgrading the Production System: During this phase, the R3up upgrade control program checks whether there are any change requests registered for transport from the development system to the production system. If this is the case, R3up offers to import the transport automatically, instead of you carrying out adjustments with transactions SPDD/SPAU. If you choose this procedure, you still have the option of stopping SPDD/SPAU to check the changes accepted automatically before they are activated.
    If you decide to import a transport automatically, a subsequent analysis checks whether there is an entry in the transport you specified for each modified object found in this SAP System. Only if this is the case is the transport marked as suitable.
    If there are more modified objects in the production system than in the test system, they cannot be dealt with by the transport. This means that you have to adjust these objects.
    If you had more modified objects in the test system than in the production system and these are also contained in the transport, you import these into the production system with the transport
    regards
    karthik
    Reward points if useful

  • Opening a container in read-only mode (DB_RDONLY, setReadOnly())

    I have one process access a container in normal mode and another accessing it in read-only mode (XmlManager::openContainer with DB_RDONLY or XmlContainerConfig. setReadOnly(true) ), both with transactions. Is this:
    (1) wrong (potentially dangerous);
    (2) pointless (no benefits for the read-only process);
    (3) reasonable (potential benefits for the read-only process)?
    Whatever the answer, why is it so?
    Michael Ludwig

    hi,
    Read only means you cannot mofiy the file. This also includes that you cannot delete a readonly-file yes,
    what i am doing is i have three button in my layout 'save','view' and 'delete'.
    1.so when user press 'save' button after selecting the file then the file gets saved into the specified.
    2. when user press 'view' button the file has to open in read only mode.
    for this i have written above mentioned code(but still i am able to edit the file)
    3.when user press 'delete' button the file has to be deleted from the specified location.
    so my problem is after setting file to read only mode, i am able to edit but i am not able to delete it.
    What i am using to set the file to read only mode is right?
    Please help.
    Thanks..

  • OBIEE11g: Set user privileges to  Open RPD in Read Only mode.

    Hi All,
    Can some one help me , how to set user privileges to open RPD in read only mode.
    1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
    2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
    How to set the security to achieve this.

    863866 wrote:
    Hi All,
    Can some one help me , how to set user privileges to open RPD in read only mode.
    1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
    2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
    How to set the security to achieve this.Hi,
    I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
    refer section,
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
    Thanks
    Deva

  • Opening the file in read only mode

    hi all,
    i am using
    i want to open any type of files in read only mode using host command.so first i am setting the attribute to read only and then opening the file. But still the opened file is editable. i have written like below
    Host( 'cmd /c  attrib +r "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);
    Host( 'cmd /c "\test_folder\testing\PURCHASE_ORDER\'||:PO_FILE_NAME||'"',NO_SCREEN);is this is the way to open the file in readonly mode?
    Along with the above the files which i opened with the help of above said code those files i am not able to delete also.(i have to delete the selected file)
    i thing when i am setting the attribute something is going for a mess!
    Please help.
    Thanks..
    Edited by: GD on Jun 23, 2011 2:25 AM

    hi,
    Read only means you cannot mofiy the file. This also includes that you cannot delete a readonly-file yes,
    what i am doing is i have three button in my layout 'save','view' and 'delete'.
    1.so when user press 'save' button after selecting the file then the file gets saved into the specified.
    2. when user press 'view' button the file has to open in read only mode.
    for this i have written above mentioned code(but still i am able to edit the file)
    3.when user press 'delete' button the file has to be deleted from the specified location.
    so my problem is after setting file to read only mode, i am able to edit but i am not able to delete it.
    What i am using to set the file to read only mode is right?
    Please help.
    Thanks..

  • GPO settings - documents in sharepoint 2007 sometimes open in read-only mode - needs IE reset to fix

    Hi,
    We've got an intranet running on SharePoint 2007.
    We also enforce alot of group policies to our users.
    But there is a problem that keeps reoccuring:
    On random moments, when a user tries to edit a document on any random document library in SP 2007, it gets opened in read-only mode.
    The only temporary fix we found for this is resetting the IE settings in Internet Options -> 'tab' advanced -> Reset IE settings... and pressing Reset.
    We think it is some GPO setting that we have malconfigured or forgot to configure and we hope that someone could point us  in a direction to troubleshoot or even solve this.
    Thanks in advance for reading and providing help.
    Inkendaal

    Hello,
    I also suspect that there might be issue with IE plug-in so could you confirm that? you can also tell su what plug-in you see in IE.
    You might also want to look at this similar threads:
    http://stackoverflow.com/questions/19164313/sharepoint-opens-documents-in-read-only-mode-for-users-with-office-2010
    http://social.technet.microsoft.com/Forums/windows/en-US/a0849e73-d347-4d12-8424-9d5bb6bfb004/all-office-files-from-sharepoint-are-opened-read-only?forum=w8itproappcompat
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Database Open in Read Only Mode

    Hi
    I would like to open database in read only mode
    like
    SQL> startup mount
    SQL> ALTER DATABASE OPEN READ ONLY
    this will open database for read only mode for all user
    i want to give read write access on database to one user
    any idea how i can proccess
    Thanks
    Chetan

    Hi,
    Alter database open read only;
    this should work fine and everything will be in read only mode. Hence if any auditing is going on and audit_trial=db then it fails to open the database in read only mode.
    If you want to control only users to stop writing to it, you may remove tablespace quotas for those users. Also, you may control them through grants. Remove any current grants assigned to them or to roles through which the grants are assigned.
    Several ways to do this. If you tell us the particular scenario then we might help in getting a solution.
    Regards,
    Vasu.

  • SQL Developer in Read-Only-Mode

    Oracle SQL Developer version 1.2.1 BUILD MAIN-32.13
    Running under WinXP
    Issue description:
    Impossible to start SQL Developer in Read-Only-Mode for certain users who should not be able to modify any data.

    The feature is under consideration in http://htmldb.oracle.com/pls/otn/f?p=42626:39:3043613241465472::NO::P39_ID:4701, but something similar was previously rejected in http://htmldb.oracle.com/pls/otn/f?p=42626:39:3043613241465472::NO::P39_ID:2741 ...
    K.

Maybe you are looking for